Lines Matching refs:I

137 easier to configure and from what I have read, they use
147 I use the following via a shell script to load my SoundBlaster:
163 When using sound as a module, I typically put these commands
210 For example, I use the following to remove my Soundblaster (rmmod
211 in the reverse order in which I loaded the modules):
218 When using sound as a module, I typically put these commands
233     (for example, I make a /lib/modules/<kernel>/misc/tmp
245 can be a configuration nightmare.  I have heard reports of 3-4
246 sound cards (typically I only use 2).  You can sometimes use
249 On my machine I have two sound cards (cs4232 and Soundblaster Vibra
250 16).  By loading sound as modules, I can control which is the first
253 would be the first sound device, but I prefer the Soundblaster.  
260 module twice.  For example, I have a SoundBlaster vibra 16
271     the I/O, etc. for the second sound card.
275 Warning:  I have never been able to get two PnP sound cards of the
276 same type to load at the same time.  I have tried this several times
280 Since this was originally release, I have received a couple of 
323     when I had an IRQ conflict.
383 And I am sure, several other ways.  
411 For example, I use the following to load my Soundblaster PCI 128