Lines Matching refs:don
143 first time. Sound cards don't have standard configuration so there are no
286 you have warm booted it after DOS but they don't work after cold boot
290 currently used by the card don't match configuration of the driver you will
301 (versions 2.1.x and earlier) don't support PnP. This means that you will have
367 way to configure some cards. In this case you don't need to boot DOS/Win95
380 should do it if you don't want to spend time recompiling the kernel and
403 (Other Jazz based cards should work but I don't have any reports
431 (maybe ALSxxx chips too but they probably don't work).
440 applications don't check if the card actually supports 16 bits.
445 Use the SB mode with "clones" only if you don't find anything
461 don't enable MPU401 mode blindly. Many cards with native support
622 Unfortunately the MPU401 mode doesn't work (I don't know how to
664 during boot. Usually you don't need to run any extra initialization
733 prevent some later ones from being asked. For example don't answer y to
734 the first question (PAS16) if you don't really have a PAS16. Don't enable
776 with these cards may cause trouble. However I don't currently know
779 - Answer 'y' if you have GUS or GUS MAX. Answer 'n' if you don't
781 Currently I don't have experiences with the GUS ACE so I don't
830 channels with cards that don't support this feature will prevent
836 cards made by Spea don't work properly with Linux.
976 earliest ones (pre 3.7) don't have a hardware mixer. With these cards
1068 distributed with the DOS/Windows drivers of the card (don't use the mt32.ld).
1105 cards made by Reveal don't work with Linux. They use older revision
1110 itself so you don't need to enable other drivers than SoundScape
1168 dangerous as long as you don't try to use a file called sndscape.cod.
1181 Mozart and OPTi 82C928 (the original MAD16) chips don't support
1230 The Logitech SoundMan Wave (don't confuse this with the SM16 or SM Games) is
1248 answering 'y' doesn't cause damage your computer so don't panic.
1273 so you don't need to enable it (the driver uses normal SB MIDI automatically
1276 NOTE! ESS cards are not compatible with MSS/WSS so don't worry if MSS support
1284 recommended by ESS (5, 7, 9/2 and 10). In this case all IRQs don't work.
1314 Sorry, can't help. Some cards may work and some don't.
1405 don't work in the SB and MSS modes at the same time.
1418 programming information available about the card. If you don't
1426 to the driver. There are three main reasons: First I don't want to break
1432 Some companies don't give low level technical information about their