Lines Matching refs:hub
76 pressed, or a suspended USB hub resuming when a device is plugged in.
86 communication taking place. (For example, a hub isn't considered idle
87 unless all the devices plugged into that hub are already suspended.)
112 only drivers which do support it are the hub driver, kaweth, asix,
257 This means that non-hub devices won't be autosuspended unless the user
532 xHCI host root hub which support software LPM, the
547 controlled through Set/ClearPortFeature(PORT_POWER) requests to a hub.
548 In the case of a root or platform-internal hub the host controller
555 VBUS may be maintained in the case where a hub gangs multiple ports into
557 are turned off. VBUS may also be maintained by hub ports configured for
570 quirks) as the system resume path for the hub.
588 This mechanism is dependent on the hub advertising port power switching in its
589 hub descriptor (wHubCharacteristics logical power switching mode field).
595 leave hub interface drivers bound. If the driver for the usb device (not
597 hub interface driver is unbound, control of its child ports is lost and all
603 these files are relative to a usb hub device (prefix).
608 hub port device + |
609 hub interface device + | |
621 another hub. The expectation is that all superspeed ports have a
697 external hub ports which should be considered 'hotplug'