264 			printk(KERN_ERR "xc4000: I2C write failed (len=%i)\n",  in xc_send_i2c_data()
267 				printk(KERN_ERR "bytes %*ph\n", 4, buf);  in xc_send_i2c_data()
289 			printk(KERN_ERR "xc4000: reset failed\n");  in xc4000_tuner_reset()
293 		printk(KERN_ERR "xc4000: no tuner reset callback function, "  in xc4000_tuner_reset()
395 		printk(KERN_ERR  in xc_set_signal_source()
561 		printk(KERN_ERR "xc4000: I2C read failed\n");  in xc4000_readreg()
644 		printk(KERN_ERR "Error! firmware not loaded\n");  in seek_firmware()
755 			printk(KERN_ERR "Error: firmware %s not found.\n", fname);  in xc4000_fwupload()
757 			printk(KERN_ERR "Error %d while requesting firmware %s\n",  in xc4000_fwupload()
768 		printk(KERN_ERR "Error: firmware file %s has invalid size!\n",  in xc4000_fwupload()
789 		printk(KERN_ERR "Not enough memory to load firmware file.\n");  in xc4000_fwupload()
803 			printk(KERN_ERR "More firmware images in file than "  in xc4000_fwupload()
829 			printk(KERN_ERR "Firmware type (%x), id %llx is corrupted (size=%d, expected %d)\n",  in xc4000_fwupload()
837 			printk(KERN_ERR "Not enough memory to load firmware file.\n");  in xc4000_fwupload()
859 		printk(KERN_ERR "Firmware file is incomplete!\n");  in xc4000_fwupload()
866 	printk(KERN_ERR "Firmware header is incomplete!\n");  in xc4000_fwupload()
869 	printk(KERN_ERR "Error: firmware file is corrupted!\n");  in xc4000_fwupload()
924 		printk(KERN_ERR "failed to put device into direct mode!\n");  in load_scode()
932 		printk(KERN_ERR "Failed to set scode %d\n", rc);  in load_scode()
1000 		printk(KERN_ERR "Error %d while loading base firmware\n", rc);  in check_firmware()
1054 		printk(KERN_ERR "Unable to read tuner registers.\n");  in check_firmware()
1213 		printk(KERN_ERR "xc4000 delivery system not supported!\n");  in xc4000_set_params()
1231 		printk(KERN_ERR "xc4000: xc_set_signal_source(%d) failed\n",  in xc4000_set_params()
1242 			printk(KERN_ERR "xc4000: xc_set_tv_standard failed\n");  in xc4000_set_params()
1262 		printk(KERN_ERR "xc4000: setting registers failed\n");  in xc4000_set_params()
1424 		printk(KERN_ERR  in xc4000_set_analog_params()
1443 			printk(KERN_ERR "xc4000: xc_set_tv_standard failed\n");  in xc4000_set_analog_params()
1457 		printk(KERN_ERR "xc4000: setting registers failed\n");  in xc4000_set_analog_params()
1610 			printk(KERN_ERR  in xc4000_sleep()
1742 		printk(KERN_ERR  in xc4000_attach()