38 	u32 val;  in my3126_interrupt_handler()  local
46 		cphy_mdio_read(cphy, MDIO_MMD_PMAPMD, MDIO_STAT1, &val);  in my3126_interrupt_handler()
47 		val16 = (u16) val;  in my3126_interrupt_handler()
65 		OFFSET(SUNI1x10GEXP_REG_MSTAT_COUNTER_33_LOW), &val);  in my3126_interrupt_handler()
66 	act_count += val;  in my3126_interrupt_handler()
69 	t1_tpi_read(adapter, A_ELMER0_GPO, &val);  in my3126_interrupt_handler()
70 	cphy->elmer_gpo = val;  in my3126_interrupt_handler()
72 	if ( (val & (1 << 8)) || (val & (1 << 19)) ||  in my3126_interrupt_handler()
75 			val |= (1 << 9);  in my3126_interrupt_handler()
77 			val |= (1 << 20);  in my3126_interrupt_handler()
81 			val &= ~(1 << 9);  in my3126_interrupt_handler()
83 			val &= ~(1 << 20);  in my3126_interrupt_handler()
87 	t1_tpi_write(adapter, A_ELMER0_GPO, val);  in my3126_interrupt_handler()
89 	cphy->elmer_gpo = val;  in my3126_interrupt_handler()
112 	u32 val;  in my3126_get_link_status()  local
117 	cphy_mdio_read(cphy, MDIO_MMD_PMAPMD, MDIO_STAT1, &val);  in my3126_get_link_status()
118 	val16 = (u16) val;  in my3126_get_link_status()
121 	t1_tpi_read(adapter, A_ELMER0_GPO, &val);  in my3126_get_link_status()
122 	cphy->elmer_gpo = val;  in my3126_get_link_status()
129 			 val &= ~(1 << 8);  in my3126_get_link_status()
131 			 val &= ~(1 << 19);  in my3126_get_link_status()
135 			 val |= (1 << 8);  in my3126_get_link_status()
137 			 val |= (1 << 19);  in my3126_get_link_status()
140 	t1_tpi_write(adapter, A_ELMER0_GPO, val);  in my3126_get_link_status()
141 	cphy->elmer_gpo = val;  in my3126_get_link_status()
188 	u32 val;  in my3126_phy_reset()  local
190 	t1_tpi_read(adapter, A_ELMER0_GPO, &val);  in my3126_phy_reset()
191 	val &= ~4;  in my3126_phy_reset()
192 	t1_tpi_write(adapter, A_ELMER0_GPO, val);  in my3126_phy_reset()
195 	t1_tpi_write(adapter, A_ELMER0_GPO, val | 4);  in my3126_phy_reset()
199 	t1_tpi_read(adapter, A_ELMER0_GPO, &val);  in my3126_phy_reset()
200 	val |= 0x8000;  in my3126_phy_reset()
201 	t1_tpi_write(adapter, A_ELMER0_GPO, val);  in my3126_phy_reset()