88 #define ULI526X_DBUG(dbug_now, msg, value)			\  macro
292 	ULI526X_DBUG(0, "uli526x_init_one()", 0);  in uli526x_init_one()
466 	ULI526X_DBUG(0, "uli526x_open", 0);  in uli526x_open()
522 	ULI526X_DBUG(0, "uli526x_init()", 0);  in uli526x_init()
602 	ULI526X_DBUG(0, "uli526x_start_xmit", 0);  in uli526x_start_xmit()
716 		ULI526X_DBUG(1, "System bus error happen. CR5=", db->cr5_data);  in uli526x_interrupt()
837 			ULI526X_DBUG(0, "Reuse SK buffer, rdes0", rdes0);  in uli526x_rx_packet()
882 				ULI526X_DBUG(0, "Reuse SK buffer, rdes0", rdes0);  in uli526x_rx_packet()
903 	ULI526X_DBUG(0, "uli526x_set_filter_mode()", 0);  in uli526x_set_filter_mode()
907 		ULI526X_DBUG(0, "Enable PROM Mode", 0);  in uli526x_set_filter_mode()
916 		ULI526X_DBUG(0, "Pass all multicast address",  in uli526x_set_filter_mode()
924 	ULI526X_DBUG(0, "Set multicast address", netdev_mc_count(dev));  in uli526x_set_filter_mode()
1056 		ULI526X_DBUG(0, "Dynamic Reset device", db->tx_packet_cnt);  in uli526x_timer()
1071 		ULI526X_DBUG(0, "Link Failed", tmp_cr12);  in uli526x_timer()
1088 			ULI526X_DBUG(0, "Link link OK", tmp_cr12);  in uli526x_timer()
1169 	ULI526X_DBUG(0, "uli526x_dynamic_reset()", 0);  in uli526x_dynamic_reset()
1193 	ULI526X_DBUG(0, "uli526x_suspend", 0);  in uli526x_suspend()
1226 	ULI526X_DBUG(0, "uli526x_resume", 0);  in uli526x_resume()
1262 	ULI526X_DBUG(0, "uli526x_free_rxbuffer()", 0);  in uli526x_free_rxbuffer()
1292 		ULI526X_DBUG(0, "SK Buffer reuse method error", db->rx_avail_cnt);  in uli526x_reuse_skb()
1311 	ULI526X_DBUG(0, "uli526x_descriptor_init()", 0);  in uli526x_descriptor_init()
1392 	ULI526X_DBUG(0, "send_filter_frame()", 0);  in send_filter_frame()
1546 		ULI526X_DBUG(0, "Link Failed :", phy_mode);  in uli526x_sense_speed()
1809 	ULI526X_DBUG(0, "init_module() ", debug);  in uli526x_init_module()
1840 	ULI526X_DBUG(0, "uli526x_cleanup_module() ", debug);  in uli526x_cleanup_module()