Lines Matching refs:wl
49 if (b43_current_band(dev->wl) == IEEE80211_BAND_2GHZ) in b43_lpphy_op_get_default_chan()
94 if (b43_current_band(dev->wl) == IEEE80211_BAND_2GHZ) { in lpphy_read_band_sprom()
177 if (b43_current_band(dev->wl) == IEEE80211_BAND_2GHZ) in lpphy_adjust_gain_table()
241 ((b43_current_band(dev->wl) == IEEE80211_BAND_5GHZ) || in lpphy_baseband_rev0_1_init()
283 } else if (b43_current_band(dev->wl) == IEEE80211_BAND_5GHZ || in lpphy_baseband_rev0_1_init()
329 if (b43_current_band(dev->wl) == IEEE80211_BAND_2GHZ) { in lpphy_baseband_rev0_1_init()
469 if (b43_current_band(dev->wl) == IEEE80211_BAND_2GHZ) { in lpphy_baseband_rev2plus_init()
550 if (b43_current_band(dev->wl) == IEEE80211_BAND_2GHZ) in lpphy_2062_init()
591 b43dbg(dev->wl, "b2062: Using crystal tab entry %u kHz.\n", in lpphy_2062_init()
749 if (b43_current_band(dev->wl) == IEEE80211_BAND_2GHZ) in lpphy_clear_deaf()
810 if (b43_current_band(dev->wl) == IEEE80211_BAND_2GHZ) { in lpphy_disable_rx_gain_override()
826 if (b43_current_band(dev->wl) == IEEE80211_BAND_2GHZ) { in lpphy_enable_rx_gain_override()
954 if (b43_current_band(dev->wl) == IEEE80211_BAND_2GHZ) { in lpphy_rev2plus_set_rx_gain()
1207 b43dbg(dev->wl, in lpphy_rev0_1_rc_calib()
1347 if (b43_current_band(dev->wl) == IEEE80211_BAND_2GHZ) in lpphy_calibrate_rc()
1551 if (b43_current_band(dev->wl) == IEEE80211_BAND_2GHZ) { in lpphy_tx_pctl_init_sw()
1587 b43err(dev->wl, "PR41573 failed. Out of memory!\n"); in lpphy_pr41573_workaround()
1905 if (b43_current_band(dev->wl) == IEEE80211_BAND_2GHZ) { in lpphy_rx_iq_cal()
2652 b43err(dev->wl, "LP-PHY is supported only on SSB!\n"); in b43_lpphy_op_init()
2662 b43dbg(dev->wl, "Switch to channel 7 failed, error = %d.\n", in b43_lpphy_op_init()