302 		printk(KERN_ERR "53c700: Failed to allocate memory for driver, detatching\n");  in NCR_700_detect()
397 		dev_printk(KERN_ERR, dev, "53c700: scsi_add_host failed\n");  in NCR_700_detect()
516 …printk(KERN_ERR "SLOTS FULL, but count is %d, should be %d\n", hostdata->command_slot_count, NCR_7…  in find_empty_slot()
522 		printk(KERN_ERR "BUSY SLOT ON FREE LIST!!!\n");  in find_empty_slot()
545 		printk(KERN_ERR "53c700: SLOT %p is not MAGIC!!!\n", slot);  in free_slot()
548 		printk(KERN_ERR "53c700: SLOT %p is FREE!!!\n", slot);  in free_slot()
617 			printk(KERN_ERR "Invalid depth in NCR_700_scsi_done(): %d\n",  in NCR_700_scsi_done()
626 		printk(KERN_ERR "53c700: SCSI DONE HAS NULL SCp\n");  in NCR_700_scsi_done()
707 …printk(KERN_ERR "53c700: Clock speed %dMHz is too high: 75Mhz is the maximum this chip can be driv…  in NCR_700_chip_setup()
917 		printk(KERN_ERR "scsi%d (%d:%d) Parity Error!\n", host->host_no,  in process_message()
980 				scmd_printk(KERN_ERR, SCp,  in process_script_interrupt()
1063 		scmd_printk(KERN_ERR, SCp, "UNEXPECTED PHASE %s (%s)\n",  in process_script_interrupt()
1066 		scmd_printk(KERN_ERR, SCp, "         len = %d, cmd =",  in process_script_interrupt()
1074 		printk(KERN_ERR "scsi%d: (%d:%d) FATAL ERROR: %s\n",  in process_script_interrupt()
1077 			printk(KERN_ERR "     msg begins %02x %02x\n",  in process_script_interrupt()
1105 			printk(KERN_ERR "scsi%d: (%d:%d) HAS NO device\n",  in process_script_interrupt()
1112 				printk(KERN_ERR "scsi%d: (%d:%d) no saved request for tag %d\n",   in process_script_interrupt()
1124 				sdev_printk(KERN_ERR, SDp,  in process_script_interrupt()
1132 			printk(KERN_ERR "scsi%d: (%d:%d) RESELECTED but no saved command (MSG = %02x %02x %02x)!!\n",  in process_script_interrupt()
1138 				printk(KERN_ERR "scsi%d: FATAL, host not busy during valid reselection!\n",  in process_script_interrupt()
1214 				printk(KERN_ERR "scsi%d: Invalid reselection during selection!!\n", host->host_no);  in process_script_interrupt()
1217 				printk(KERN_ERR "scsi%d: script reselected and we took a selection interrupt\n",  in process_script_interrupt()
1246 		printk(KERN_ERR "scsi%d: (%d:%d), unhandled script condition %s %s at %04x\n",  in process_script_interrupt()
1263 		printk(KERN_ERR "scsi%d: (%d:%d), unidentified script interrupt 0x%x at %04x\n",  in process_script_interrupt()
1537 			printk(KERN_ERR "scsi%d: Bus Reset detected, executing command %p, slot %p, dsp %08x[%04x]\n",  in NCR_700_intr()
1556 				printk(KERN_ERR " failing command because of reset, slot %p, cmnd %p\n",  in NCR_700_intr()
1649 				printk(KERN_ERR "scsi%d: (%d:%d) phase mismatch at %04x, phase %s\n",  in NCR_700_intr()
1655 			printk(KERN_ERR "scsi%d: (%d:%d) GROSS ERROR\n",  in NCR_700_intr()
1659 			printk(KERN_ERR "scsi%d: (%d:%d) PARITY ERROR\n",  in NCR_700_intr()
1667 			printk(KERN_ERR "scsi%d: (%d:%d) Illegal Instruction detected at 0x%08x[0x%x]!!!\n"  in NCR_700_intr()
1673 			printk(KERN_ERR "scsi%d: (%d:%d) serious DMA problem, dstat=%02x\n",  in NCR_700_intr()
1708 			printk(KERN_ERR "scsi%d: Driver error: resume at 0x%08x [0x%04x] with non busy host!\n",  in NCR_700_intr()
1772 		CDEBUG(KERN_ERR, SCp, "has non zero depth %d\n",  in NCR_700_queuecommand_lck()
1777 		CDEBUG(KERN_ERR, SCp, "has max tag depth %d\n",  in NCR_700_queuecommand_lck()
1802 		scmd_printk(KERN_ERR, SCp, "Enabling Tag Command Queuing\n");  in NCR_700_queuecommand_lck()
1851 			printk(KERN_ERR "53c700: Unknown command for data direction ");  in NCR_700_queuecommand_lck()