Lines Matching refs:MPT2SAS_INFO_FMT
489 dinitprintk(ioc, printk(MPT2SAS_INFO_FMT in _scsih_determine_boot_device()
504 dinitprintk(ioc, printk(MPT2SAS_INFO_FMT in _scsih_determine_boot_device()
519 dinitprintk(ioc, printk(MPT2SAS_INFO_FMT in _scsih_determine_boot_device()
618 dewtprintk(ioc, printk(MPT2SAS_INFO_FMT "%s: handle" in _scsih_sas_device_add()
657 dewtprintk(ioc, printk(MPT2SAS_INFO_FMT "%s: handle" in _scsih_sas_device_init_add()
759 dewtprintk(ioc, printk(MPT2SAS_INFO_FMT "%s: handle" in _scsih_raid_device_add()
1787 printk(MPT2SAS_INFO_FMT "WarpDrive : Direct IO is disabled " in _scsih_init_warpdrive_properties()
1793 printk(MPT2SAS_INFO_FMT "WarpDrive : Direct IO is disabled " in _scsih_init_warpdrive_properties()
1799 printk(MPT2SAS_INFO_FMT "WarpDrive : Direct IO is disabled " in _scsih_init_warpdrive_properties()
1808 printk(MPT2SAS_INFO_FMT "WarpDrive : Direct IO is disabled " in _scsih_init_warpdrive_properties()
1815 printk(MPT2SAS_INFO_FMT "WarpDrive : Direct IO is disabled " in _scsih_init_warpdrive_properties()
1839 printk(MPT2SAS_INFO_FMT "WarpDrive : Direct IO is " in _scsih_init_warpdrive_properties()
1849 printk(MPT2SAS_INFO_FMT "WarpDrive : Direct IO is " in _scsih_init_warpdrive_properties()
1866 printk(MPT2SAS_INFO_FMT "WarpDrive : Direct IO is disabled " in _scsih_init_warpdrive_properties()
1879 printk(MPT2SAS_INFO_FMT "WarpDrive : Direct IO is disabled " in _scsih_init_warpdrive_properties()
1890 printk(MPT2SAS_INFO_FMT "WarpDrive : Direct IO is disabled " in _scsih_init_warpdrive_properties()
1899 printk(MPT2SAS_INFO_FMT "WarpDrive : Direct IO is Enabled for the drive" in _scsih_init_warpdrive_properties()
2348 printk(MPT2SAS_INFO_FMT "%s: tm_cmd busy!!!\n", in mpt2sas_scsih_issue_tm()
2356 printk(MPT2SAS_INFO_FMT "%s: host reset in progress!\n", in mpt2sas_scsih_issue_tm()
2364 dhsprintk(ioc, printk(MPT2SAS_INFO_FMT "unexpected doorbell " in mpt2sas_scsih_issue_tm()
2392 dtmprintk(ioc, printk(MPT2SAS_INFO_FMT "sending tm: handle(0x%04x)," in mpt2sas_scsih_issue_tm()
2426 dtmprintk(ioc, printk(MPT2SAS_INFO_FMT "complete tm: " in mpt2sas_scsih_issue_tm()
2729 printk(MPT2SAS_INFO_FMT "attempting host reset! scmd(%p)\n", in _scsih_host_reset()
2734 printk(MPT2SAS_INFO_FMT "Blocking the host reset\n", in _scsih_host_reset()
2745 printk(MPT2SAS_INFO_FMT "host reset: %s scmd(%p)\n", in _scsih_host_reset()
2916 MPT2SAS_INFO_FMT "SDEV_RUNNING: " in _scsih_ublock_io_device()
2974 MPT2SAS_INFO_FMT "SDEV_BLOCK: " in _scsih_block_io_device()
3091 dewtprintk(ioc, printk(MPT2SAS_INFO_FMT "%s: host has been " in _scsih_tm_tr_send()
3095 dewtprintk(ioc, printk(MPT2SAS_INFO_FMT "%s: host in pci " in _scsih_tm_tr_send()
3102 dewtprintk(ioc, printk(MPT2SAS_INFO_FMT "%s: host is not " in _scsih_tm_tr_send()
3123 dewtprintk(ioc, printk(MPT2SAS_INFO_FMT "setting delete flag: " in _scsih_tm_tr_send()
3138 dewtprintk(ioc, printk(MPT2SAS_INFO_FMT in _scsih_tm_tr_send()
3144 dewtprintk(ioc, printk(MPT2SAS_INFO_FMT "tr_send:handle(0x%04x), " in _scsih_tm_tr_send()
3179 dewtprintk(ioc, printk(MPT2SAS_INFO_FMT in _scsih_sas_control_complete()
3211 dewtprintk(ioc, printk(MPT2SAS_INFO_FMT "%s: host reset in " in _scsih_tm_tr_volume_send()
3224 dewtprintk(ioc, printk(MPT2SAS_INFO_FMT in _scsih_tm_tr_volume_send()
3230 dewtprintk(ioc, printk(MPT2SAS_INFO_FMT "tr_send:handle(0x%04x), " in _scsih_tm_tr_volume_send()
3263 dewtprintk(ioc, printk(MPT2SAS_INFO_FMT "%s: host reset in " in _scsih_tm_volume_tr_complete()
3281 dewtprintk(ioc, printk(MPT2SAS_INFO_FMT in _scsih_tm_volume_tr_complete()
3320 dewtprintk(ioc, printk(MPT2SAS_INFO_FMT "%s: host has been " in _scsih_tm_tr_complete()
3324 dewtprintk(ioc, printk(MPT2SAS_INFO_FMT "%s: host in pci " in _scsih_tm_tr_complete()
3330 dewtprintk(ioc, printk(MPT2SAS_INFO_FMT "%s: host is not " in _scsih_tm_tr_complete()
3342 dewtprintk(ioc, printk(MPT2SAS_INFO_FMT "spurious interrupt: " in _scsih_tm_tr_complete()
3348 dewtprintk(ioc, printk(MPT2SAS_INFO_FMT in _scsih_tm_tr_complete()
3362 dewtprintk(ioc, printk(MPT2SAS_INFO_FMT "sc_send:handle(0x%04x), " in _scsih_tm_tr_complete()
3488 dewtprintk(ioc, printk(MPT2SAS_INFO_FMT in _scsih_check_topo_delete_events()
3519 dewtprintk(ioc, printk(MPT2SAS_INFO_FMT in _scsih_set_volume_delete_flag()
3623 dewtprintk(ioc, printk(MPT2SAS_INFO_FMT in _scsih_check_ir_config_unhide_events()
3713 dtmprintk(ioc, printk(MPT2SAS_INFO_FMT "completing %d cmds\n", in _scsih_flush_running_cmds()
4283 dewtprintk(ioc, printk(MPT2SAS_INFO_FMT in _scsih_turn_on_pfa_led()
4322 dewtprintk(ioc, printk(MPT2SAS_INFO_FMT "enclosure_processor: " in _scsih_turn_off_pfa_led()
4659 dtmprintk(ioc, printk(MPT2SAS_INFO_FMT in _scsih_sas_host_refresh()
4821 printk(MPT2SAS_INFO_FMT "host_add: handle(0x%04x), " in _scsih_sas_host_add()
4929 printk(MPT2SAS_INFO_FMT "expander_add: handle(0x%04x)," in _scsih_expander_add()
5321 dewtprintk(ioc, printk(MPT2SAS_INFO_FMT "%s: enter: " in _scsih_remove_device()
5339 printk(MPT2SAS_INFO_FMT "removing handle(0x%04x), sas_addr" in _scsih_remove_device()
5343 dewtprintk(ioc, printk(MPT2SAS_INFO_FMT "%s: exit: " in _scsih_remove_device()
5436 printk(MPT2SAS_INFO_FMT "sas topology change: (%s)\n", in _scsih_sas_topology_change_event_debug()
5517 dewtprintk(ioc, printk(MPT2SAS_INFO_FMT "ignoring expander " in _scsih_sas_topology_change_event()
5547 dewtprintk(ioc, printk(MPT2SAS_INFO_FMT "ignoring " in _scsih_sas_topology_change_event()
5667 printk(MPT2SAS_INFO_FMT "device status change: (%s)\n" in _scsih_sas_device_status_change_event_debug()
5673 printk(MPT2SAS_INFO_FMT ", ASC(0x%x), ASCQ(0x%x)\n", ioc->name, in _scsih_sas_device_status_change_event_debug()
5768 printk(MPT2SAS_INFO_FMT "enclosure status change: (%s)\n" in _scsih_sas_enclosure_dev_status_change_event_debug()
5840 dewtprintk(ioc, printk(MPT2SAS_INFO_FMT "%s: giving up\n", in _scsih_sas_broadcast_primitive_event()
5844 dewtprintk(ioc, printk(MPT2SAS_INFO_FMT "%s: %d retry\n", in _scsih_sas_broadcast_primitive_event()
5907 dewtprintk(ioc, printk(MPT2SAS_INFO_FMT in _scsih_sas_broadcast_primitive_event()
5938 dewtprintk(ioc, printk(MPT2SAS_INFO_FMT "%s: loop back due to" in _scsih_sas_broadcast_primitive_event()
5948 dewtprintk(ioc, printk(MPT2SAS_INFO_FMT in _scsih_sas_broadcast_primitive_event()
5976 printk(MPT2SAS_INFO_FMT "discovery event: (%s)", ioc->name, in _scsih_sas_discovery_event()
6096 printk(MPT2SAS_INFO_FMT "removing handle(0x%04x), wwid" in _scsih_sas_volume_delete()
6283 printk(MPT2SAS_INFO_FMT "raid config change: (%s), elements(%d)\n", in _scsih_sas_ir_config_change_event_debug()
6443 dewtprintk(ioc, printk(MPT2SAS_INFO_FMT "%s: handle(0x%04x), " in _scsih_sas_ir_volume_event()
6531 dewtprintk(ioc, printk(MPT2SAS_INFO_FMT "%s: handle(0x%04x), " in _scsih_sas_ir_physical_disk_event()
6621 printk(MPT2SAS_INFO_FMT "raid operational status: (%s)" in _scsih_sas_ir_operation_status_event_debug()
6764 printk(MPT2SAS_INFO_FMT "search for end-devices: start\n", ioc->name); in _scsih_search_responding_sas_devices()
6787 printk(MPT2SAS_INFO_FMT "search for end-devices: complete\n", in _scsih_search_responding_sas_devices()
6873 printk(MPT2SAS_INFO_FMT "search for raid volumes: start\n", in _scsih_search_responding_raid_devices()
6917 printk(MPT2SAS_INFO_FMT "search for responding raid volumes: " in _scsih_search_responding_raid_devices()
6978 printk(MPT2SAS_INFO_FMT "search for expanders: start\n", ioc->name); in _scsih_search_responding_expanders()
7001 printk(MPT2SAS_INFO_FMT "search for expanders: complete\n", ioc->name); in _scsih_search_responding_expanders()
7019 printk(MPT2SAS_INFO_FMT "removing unresponding devices: start\n", in _scsih_remove_unresponding_sas_devices()
7023 printk(MPT2SAS_INFO_FMT "removing unresponding devices: end-devices\n", in _scsih_remove_unresponding_sas_devices()
7036 printk(MPT2SAS_INFO_FMT "removing unresponding devices: " in _scsih_remove_unresponding_sas_devices()
7048 printk(MPT2SAS_INFO_FMT "removing unresponding devices: expanders\n", in _scsih_remove_unresponding_sas_devices()
7065 printk(MPT2SAS_INFO_FMT "removing unresponding devices: complete\n", in _scsih_remove_unresponding_sas_devices()
7119 printk(MPT2SAS_INFO_FMT "scan devices: start\n", ioc->name); in _scsih_scan_for_devices_after_reset()
7123 printk(MPT2SAS_INFO_FMT "\tscan devices: expanders start\n", in _scsih_scan_for_devices_after_reset()
7132 printk(MPT2SAS_INFO_FMT "\tbreak from expander scan: " in _scsih_scan_for_devices_after_reset()
7147 printk(MPT2SAS_INFO_FMT "\tBEFORE adding expander: " in _scsih_scan_for_devices_after_reset()
7152 printk(MPT2SAS_INFO_FMT "\tAFTER adding expander: " in _scsih_scan_for_devices_after_reset()
7159 printk(MPT2SAS_INFO_FMT "\tscan devices: expanders complete\n", in _scsih_scan_for_devices_after_reset()
7165 printk(MPT2SAS_INFO_FMT "\tscan devices phys disk start\n", ioc->name); in _scsih_scan_for_devices_after_reset()
7174 printk(MPT2SAS_INFO_FMT "\tbreak from phys disk scan:" in _scsih_scan_for_devices_after_reset()
7194 printk(MPT2SAS_INFO_FMT "\tbreak from phys disk scan " in _scsih_scan_for_devices_after_reset()
7203 printk(MPT2SAS_INFO_FMT "\tBEFORE adding phys disk: " in _scsih_scan_for_devices_after_reset()
7220 printk(MPT2SAS_INFO_FMT "\tAFTER adding phys disk: " in _scsih_scan_for_devices_after_reset()
7227 printk(MPT2SAS_INFO_FMT "\tscan devices: phys disk complete\n", in _scsih_scan_for_devices_after_reset()
7230 printk(MPT2SAS_INFO_FMT "\tscan devices: volumes start\n", ioc->name); in _scsih_scan_for_devices_after_reset()
7238 printk(MPT2SAS_INFO_FMT "\tbreak from volume scan: " in _scsih_scan_for_devices_after_reset()
7258 printk(MPT2SAS_INFO_FMT "\tbreak from volume scan: " in _scsih_scan_for_devices_after_reset()
7270 printk(MPT2SAS_INFO_FMT "\tBEFORE adding volume: " in _scsih_scan_for_devices_after_reset()
7274 printk(MPT2SAS_INFO_FMT "\tAFTER adding volume: " in _scsih_scan_for_devices_after_reset()
7280 printk(MPT2SAS_INFO_FMT "\tscan devices: volumes complete\n", in _scsih_scan_for_devices_after_reset()
7285 printk(MPT2SAS_INFO_FMT "\tscan devices: end devices start\n", in _scsih_scan_for_devices_after_reset()
7295 printk(MPT2SAS_INFO_FMT "\tbreak from end device scan:" in _scsih_scan_for_devices_after_reset()
7313 printk(MPT2SAS_INFO_FMT "\tBEFORE adding end device: " in _scsih_scan_for_devices_after_reset()
7328 printk(MPT2SAS_INFO_FMT "\tAFTER adding end device: " in _scsih_scan_for_devices_after_reset()
7335 printk(MPT2SAS_INFO_FMT "\tscan devices: end devices complete\n", in _scsih_scan_for_devices_after_reset()
7338 printk(MPT2SAS_INFO_FMT "scan devices: complete\n", ioc->name); in _scsih_scan_for_devices_after_reset()
7359 dtmprintk(ioc, printk(MPT2SAS_INFO_FMT "%s: " in mpt2sas_scsih_reset_handler()
7363 dtmprintk(ioc, printk(MPT2SAS_INFO_FMT "%s: " in mpt2sas_scsih_reset_handler()
7379 dtmprintk(ioc, printk(MPT2SAS_INFO_FMT "%s: " in mpt2sas_scsih_reset_handler()
7434 dewtprintk(ioc, printk(MPT2SAS_INFO_FMT "port enable: complete " in _firmware_event_work()
7693 printk(MPT2SAS_INFO_FMT "expander_remove: handle" in _scsih_expander_node_remove()
7747 printk(MPT2SAS_INFO_FMT "IR shutdown (sending)\n", ioc->name); in _scsih_ir_shutdown()
7762 printk(MPT2SAS_INFO_FMT "IR shutdown (complete): " in _scsih_ir_shutdown()
7839 printk(MPT2SAS_INFO_FMT "removing handle(0x%04x), wwid" in _scsih_remove()
8066 printk(MPT2SAS_INFO_FMT "port enable: FAILED\n", ioc->name); in _scsih_scan_start()
8091 printk(MPT2SAS_INFO_FMT "port enable: FAILED with timeout " in _scsih_scan_finished()
8101 printk(MPT2SAS_INFO_FMT "port enable: FAILED with " in _scsih_scan_finished()
8109 printk(MPT2SAS_INFO_FMT "port enable: SUCCESS\n", ioc->name); in _scsih_scan_finished()
8207 printk(MPT2SAS_INFO_FMT "The max_sectors value is " in _scsih_probe()
8296 printk(MPT2SAS_INFO_FMT "pdev=0x%p, slot=%s, entering " in _scsih_suspend()
8320 printk(MPT2SAS_INFO_FMT "pdev=0x%p, slot=%s, previous " in _scsih_resume()
8355 printk(MPT2SAS_INFO_FMT "PCI error: detected callback, state(%d)!!\n", in _scsih_pci_error_detected()
8393 printk(MPT2SAS_INFO_FMT "PCI error: slot reset callback!!\n", in _scsih_pci_slot_reset()
8430 printk(MPT2SAS_INFO_FMT "PCI error: resume callback!!\n", ioc->name); in _scsih_pci_resume()
8447 printk(MPT2SAS_INFO_FMT "PCI error: mmio enabled callback!!\n", in _scsih_pci_mmio_enabled()