Lines Matching refs:ports
147 properly when DMA is enabled. Make sure that ports where
247 provide all of these ports, depending on how the serial port
263 Select the number of available UART ports for the Samsung S3C
281 Allow selection of the S3C24XX on-board serial ports for use as
298 provide all of these ports, depending on how the serial port
320 provide all of these ports, depending on how the serial port
377 for serial ports in newer DECstation systems. These include the
444 can enable its onboard serial ports by enabling this option.
507 This driver supports the built-in serial ports of the Blackfin family
625 This driver supports the Zilog8530 serial ports found on many Sparc
626 systems. Say Y or M if you want to be able to these serial ports.
640 This driver supports the 8250 serial ports that run the keyboard and
642 to these serial ports.
697 This driver supports the Siemens SAB82532 DUSCC serial ports on newer
699 serial ports.
721 This driver supports the Zilog8530 serial ports found on SGI
722 systems. Say Y or M if you want to be able to these serial ports.
735 int "Maximum number of SCI(F) serial ports"
754 to use serial ports, say Y. Otherwise, say N.
769 Support for the LPC32XX high speed serial ports (up to 900kbps).
780 ports on the LPC32XX as the console, you can do so by answering
808 This serial driver supports the Freescale Coldfire serial ports.
811 int "Default baudrate for Coldfire serial ports"
816 ColdFire serial ports. The usual default varies from board to board,
831 This driver supports the Zilog z85C30 serial ports found on
833 Say Y or M if you want to be able to these serial ports.
843 both z85C30 and 8250 type ports at the same time.
849 access the built-in serial ports on powermacs will need to
852 If you enable this option, any z85c30 ports in the system will
857 Say N unless you need the z85c30 ports on your (Power)Mac
874 This driver supports the SCC and SMC serial ports on Motorola
908 This driver supports MPC52xx and MPC512x PSC serial ports. If you would
982 int "Maximum number of TMPTX39XX/49XX SIO ports"
1018 of cards which provide multiple serial ports. You would need
1034 and wish to use the serial ports on this card, say Y.
1100 If you have a PowerPC based system that has serial ports
1102 Currently, only 8250 compatible ports are supported, but
1111 can enable its onboard serial ports by enabling this option.
1147 Support for Console on the NWP serial ports.
1164 This driver supports the QE serial ports on Freescale embedded
1180 Support for console on SCCNXP serial ports.
1188 This selects support for SC16IS7xx serial ports.
1326 int "Maximum number of Altera UART ports"
1331 UART ports. The usual default varies from board to board, and
1335 int "Default baudrate for Altera UART ports"
1340 Altera UART ports. The usual default varies from board to board,
1382 bool "Enable tty device interface for some SMD ports"
1387 ports via tty device interface for MSM chipset.
1439 int "Maximum number of AR933X serial ports"
1443 Set this to the number of serial ports you want the driver
1451 This driver support the USART and UART ports on
1484 int "Number of ARC UART ports"
1489 Set this to the number of serial ports you want the driver
1509 int "Maximum number of RocketPort EXPRESS/INFINITY ports"
1513 If multiple cards are present, the default limit of 32 ports may