162 #define serial_outp(up, offset, value)	serial_out(up, offset, value)  macro
202 		serial_outp(up, UART_RSA_MSR, mode | UART_RSA_MSR_FIFO);  in __enable_rsa()
222 			serial_outp(up, UART_RSA_FRR, 0);  in enable_rsa()
245 			serial_outp(up, UART_RSA_MSR, mode & ~UART_RSA_MSR_FIFO);  in disable_rsa()
405 		serial_outp(up, UART_TX, up->port.x_char);  in transmit_chars()
628 		serial_outp(up, UART_LCR, 0xBF);  in sunsu_startup()
629 		serial_outp(up, UART_EFR, UART_EFR_ECB);  in sunsu_startup()
630 		serial_outp(up, UART_IER, 0);  in sunsu_startup()
631 		serial_outp(up, UART_LCR, 0);  in sunsu_startup()
633 		serial_outp(up, UART_LCR, 0xBF);  in sunsu_startup()
634 		serial_outp(up, UART_EFR, UART_EFR_ECB);  in sunsu_startup()
635 		serial_outp(up, UART_LCR, 0);  in sunsu_startup()
651 		serial_outp(up, UART_FCR, UART_FCR_ENABLE_FIFO);  in sunsu_startup()
652 		serial_outp(up, UART_FCR, UART_FCR_ENABLE_FIFO |  in sunsu_startup()
654 		serial_outp(up, UART_FCR, 0);  in sunsu_startup()
691 	serial_outp(up, UART_LCR, UART_LCR_WLEN8);  in sunsu_startup()
706 	serial_outp(up, UART_IER, up->ier);  in sunsu_startup()
739 	serial_outp(up, UART_IER, 0);  in sunsu_shutdown()
756 	serial_outp(up, UART_FCR, UART_FCR_ENABLE_FIFO |  in sunsu_shutdown()
759 	serial_outp(up, UART_FCR, 0);  in sunsu_shutdown()
883 		serial_outp(up, UART_LCR, 0xBF);  in sunsu_change_speed()
884 		serial_outp(up, UART_EFR, cflag & CRTSCTS ? UART_EFR_CTS :0);  in sunsu_change_speed()
886 	serial_outp(up, UART_LCR, cval | UART_LCR_DLAB);/* set DLAB */  in sunsu_change_speed()
887 	serial_outp(up, UART_DLL, quot & 0xff);		/* LS of divisor */  in sunsu_change_speed()
888 	serial_outp(up, UART_DLM, quot >> 8);		/* MS of divisor */  in sunsu_change_speed()
890 		serial_outp(up, UART_FCR, fcr);		/* set fcr */  in sunsu_change_speed()
891 	serial_outp(up, UART_LCR, cval);		/* reset DLAB */  in sunsu_change_speed()
896 			serial_outp(up, UART_FCR, UART_FCR_ENABLE_FIFO);  in sunsu_change_speed()
898 		serial_outp(up, UART_FCR, fcr);		/* set fcr */  in sunsu_change_speed()
1063 		serial_outp(up, UART_IER, 0);  in sunsu_autoconfig()
1068 		serial_outp(up, UART_IER, 0x0f);  in sunsu_autoconfig()
1073 		serial_outp(up, UART_IER, scratch);  in sunsu_autoconfig()
1091 		serial_outp(up, UART_MCR, UART_MCR_LOOP | 0x0A);  in sunsu_autoconfig()
1093 		serial_outp(up, UART_MCR, save_mcr);  in sunsu_autoconfig()
1097 	serial_outp(up, UART_LCR, 0xBF);	/* set up for StarTech test */  in sunsu_autoconfig()
1098 	serial_outp(up, UART_EFR, 0);		/* EFR is the same as FCR */  in sunsu_autoconfig()
1099 	serial_outp(up, UART_LCR, 0);  in sunsu_autoconfig()
1100 	serial_outp(up, UART_FCR, UART_FCR_ENABLE_FIFO);  in sunsu_autoconfig()
1118 		serial_outp(up, UART_LCR, UART_LCR_DLAB);  in sunsu_autoconfig()
1122 			serial_outp(up, UART_LCR, 0xBF);  in sunsu_autoconfig()
1129 		serial_outp(up, UART_LCR, save_lcr | UART_LCR_DLAB);  in sunsu_autoconfig()
1130 		serial_outp(up, UART_FCR,  in sunsu_autoconfig()
1140  			serial_outp(up, UART_FCR, UART_FCR_ENABLE_FIFO);  in sunsu_autoconfig()
1141 			serial_outp(up, UART_LCR, 0);  in sunsu_autoconfig()
1142 			serial_outp(up, UART_FCR,  in sunsu_autoconfig()
1148 		serial_outp(up, UART_FCR, UART_FCR_ENABLE_FIFO);  in sunsu_autoconfig()
1150 	serial_outp(up, UART_LCR, save_lcr);  in sunsu_autoconfig()
1153 		serial_outp(up, UART_SCR, 0xa5);  in sunsu_autoconfig()
1155 		serial_outp(up, UART_SCR, 0x5a);  in sunsu_autoconfig()
1157 		serial_outp(up, UART_SCR, scratch);  in sunsu_autoconfig()
1174 		serial_outp(up, UART_RSA_FRR, 0);  in sunsu_autoconfig()
1176 	serial_outp(up, UART_MCR, save_mcr);  in sunsu_autoconfig()
1177 	serial_outp(up, UART_FCR, (UART_FCR_ENABLE_FIFO |  in sunsu_autoconfig()
1180 	serial_outp(up, UART_FCR, 0);  in sunsu_autoconfig()
1182 	serial_outp(up, UART_IER, 0);  in sunsu_autoconfig()