Lines Matching refs:and

3 #    (a) a peripheral controller, and
12 # With help from a special transceiver and a "Mini-AB" jack, systems with
22 #   - licensed IP used in both SOC and discrete versions
42 	   dynamically linked module called "at91_udc" and force all
53 	   dynamically linked module called "lpc32xx_udc" and force all
61 	  the AT32AP700x, some AT91SAM9 and AT91CAP9 processors from Atmel.
79 	   Some of Freescale PowerPC and i.MX processors have a High Speed
86 	   dynamically linked module called "fsl_usb2_udc" and force
121 	   controller in the OMAP 1611, and should work with controllers
125 	   dynamically linked module called "omap_udc" and force all
140 	   dynamically linked module called "pxa25x_udc" and force all
157 	   R8A66597 is a discrete USB host and peripheral controller chip that
158 	   supports both full and high speed USB 2.0 data transfers.
159 	   It has nine configurable endpoints, and endpoint zero.
162 	   dynamically linked module called "r8a66597_udc" and force all
169 	   Renesas USBHS is a discrete USB host and peripheral controller chip
170 	   that supports both full and high speed USB 2.0 data transfers.
171 	   It has nine or more configurable endpoints, and endpoint zero.
174 	   dynamically linked module called "renesas_usbhs" and force all
187 	   dynamically linked module called "pxa27x_udc" and force all
198 	  This driver has been tested on the S3C2410, S3C2412, and
206 	tristate "S3C2416, S3C2443 and S3C2450 USB Device Controller"
209 	  Samsung's S3C2416, S3C2443 and S3C2450 is an ARM9 based SoC
213 	  This driver has been tested on S3C2416 and S3C2450 processors.
219 	  Marvell Socs (including PXA and MMP series) include a high speed
231 # Controllers available in both integrated and discrete versions
238 	   supports both full and high speed USB 2.0 data transfers.
239 	   It has seven configurable endpoints, and endpoint zero.
242 	   dynamically linked module called "m66592_udc" and force all
248 # Controllers available only in discrete form (and all PCI controllers)
257 	   it provides 4 IN and 4 OUT endpoints (bulk or interrupt type).
258 	   The UDC port supports OTG operation, and may be used as a host port
262 	   dynamically linked module called "amd5536udc" and force all
272 	   controller in the MPC8360 and MPC8272, and should work with
282 	  both full and high speed USB 2.0 data transfers.
287 	  dynamically linked module called "net2272" and force all
305 	   supports both full and high speed USB 2.0 data transfers.
308 	   (for control transfers) and several endpoints with dedicated
312 	   supports full, high speed USB 2.0 and super speed USB 3.0
316 	   (for control transfers) and several endpoints with dedicated
320 	   dynamically linked module called "net2280" and force all
334 	   dynamically linked module called "goku_udc" and to force all
348 	  supports both full and high speed USB 2.0 data transfers.
349 	  This driver supports both control transfer and bulk transfer modes.
368 	  and high speed USB 2.0 data transfers. It has seven configurable
373 	  dynamically linked module called "udc-xilinx" and force all
387 	  can be high, full, or low speed; and they have access to endpoints
399 	  dynamically linked module called "dummy_hcd" and force all
403 # first and will be selected by default.