Lines Matching refs:n
9 "Project-Id-Version: cpufrequtils 0.1-pre2\n"
10 "Report-Msgid-Bugs-To: \n"
11 "POT-Creation-Date: 2011-03-08 17:03+0100\n"
12 "PO-Revision-Date: 2004-11-17 15:53+1000\n"
13 "Last-Translator: Bruno Ducrot <ducrot@poupinou.org>\n"
14 "Language-Team: NONE\n"
15 "Language: \n"
16 "MIME-Version: 1.0\n"
17 "Content-Type: text/plain; charset=ISO-8859-1\n"
18 "Content-Transfer-Encoding: 8bit\n"
76 "interval_sec | -c command ...]\n"
83 "interval_sec | -c command ...]\n"
88 msgid "\t -v: be more verbose\n"
93 msgid "\t -h: print this help\n"
98 msgid "\t -i: time intervall to measure for in seconds (default 1)\n"
103 msgid "\t -t: show CPU topology/hierarchy\n"
108 msgid "\t -l: list available CPU sleep monitors (for use with -m)\n"
113 msgid "\t -m: show specific CPU sleep monitors only (in same order)\n"
119 "only one of: -t, -l, -m are allowed\n"
125 msgid " all supported monitors are shown\n"
130 msgid "Monitor %s, Counter %s has no count function. Implementation error\n"
135 msgid " *is offline\n"
140 msgid "%s: max monitor name length (%d) exceeded\n"
145 msgid "No matching monitor found in %s, try -l option\n"
150 msgid "Monitor \"%s\" (%d states) - Might overflow after %u s\n"
155 msgid "%s took %.5f seconds and exited with status %d\n"
160 msgid "Cannot read number of available processors\n"
165 msgid "Available monitor %s needs root access\n"
170 msgid "No HW Cstate monitors found\n"
175 msgid "cpupower [ -c cpulist ] subcommand [ARGS]\n"
180 msgid "cpupower --version\n"
185 msgid "Supported subcommands are:\n"
191 "\n"
192 "Some subcommands can make use of the -c cpulist option.\n"
197 msgid "Look at the general cpupower manpage how to use it\n"
202 msgid "and read up the subcommand's manpage whether it is supported.\n"
208 "\n"
209 "Use cpupower help subcommand for getting help for above subcommands.\n"
214 msgid "Report errors and bugs to %s, please.\n"
215 msgstr "Veuillez rapportez les erreurs et les bogues � %s, s'il vous plait.\n"
219 msgid "Error parsing cpu list\n"
224 msgid "Subcommand %s needs root privileges\n"
229 msgid "Couldn't count the number of CPUs (%s: %s), assuming 1\n"
230 msgstr "D�termination du nombre de CPUs (%s : %s) impossible. Assume 1\n"
235 " minimum CPU frequency - maximum CPU frequency - governor\n"
237 " Fr�quence CPU minimale - Fr�quence CPU maximale - r�gulateur\n"
241 msgid "Error while evaluating Boost Capabilities on CPU %d -- are you root?\n"
251 msgid " boost state support: \n"
256 msgid " Supported: %s\n"
269 msgid " Active: %s\n"
270 msgstr " pilote : %s\n"
274 msgid " Boost States: %d\n"
279 msgid " Total States: %d\n"
284 msgid " Pstate-Pb%d: %luMHz (boost state)\n"
289 msgid " Pstate-P%d: %luMHz\n"
294 msgid " no or unknown cpufreq driver is active on this CPU\n"
295 msgstr " pas de pilotes cpufreq reconnu pour ce CPU\n"
299 msgid " driver: %s\n"
300 msgstr " pilote : %s\n"
345 "The governor \"%s\" may decide which speed to use\n"
346 " within this range.\n"
348 "Le r�gulateur \"%s\" est libre de choisir la vitesse\n"
349 " dans cette plage de fr�quences.\n"
368 msgid "Usage: cpupower freqinfo [options]\n"
369 msgstr "Usage : cpufreq-info [options]\n"
374 msgid "Options:\n"
375 msgstr "Options :\n"
379 msgid " -e, --debug Prints out debug information [default]\n"
380 msgstr " -e, --debug Afficher les informations de d�boguage\n"
385 " -f, --freq Get frequency the CPU currently runs at, according\n"
386 " to the cpufreq core *\n"
388 " -f, --freq Obtenir la fr�quence actuelle du CPU selon le point\n"
389 " de vue du coeur du syst�me de cpufreq *\n"
394 " -w, --hwfreq Get frequency the CPU currently runs at, by reading\n"
395 " it from hardware (only available to root) *\n"
397 " -w, --hwfreq Obtenir la fr�quence actuelle du CPU directement par\n"
398 " le mat�riel (doit �tre root) *\n"
404 "allowed *\n"
407 "*\n"
411 msgid " -d, --driver Determines the used cpufreq kernel driver *\n"
412 msgstr " -d, --driver Affiche le pilote cpufreq utilis� *\n"
416 msgid " -p, --policy Gets the currently used cpufreq policy *\n"
417 msgstr " -p, --policy Affiche la tactique actuelle de cpufreq *\n"
421 msgid " -g, --governors Determines available cpufreq governors *\n"
423 " -g, --governors Affiche les r�gulateurs disponibles de cpufreq *\n"
429 "frequency *\n"
431 " -a, --affected-cpus Affiche quels sont les CPUs qui doivent changer de\n"
432 " fr�quences en m�me temps *\n"
437 " -a, --affected-cpus Determines which CPUs need to have their frequency\n"
438 " coordinated by software *\n"
440 " -a, --affected-cpus Affiche quels sont les CPUs qui doivent changer de\n"
441 " fr�quences en m�me temps *\n"
445 msgid " -s, --stats Shows cpufreq statistics if available\n"
447 " -s, --stats Indique des statistiques concernant cpufreq, si\n"
448 " disponibles\n"
454 "changes *\n"
457 "*\n"
461 msgid " -b, --boost Checks for turbo or boost modes *\n"
468 "cpufreq\n"
469 " interface in 2.4. and early 2.6. kernels\n"
471 " -o, --proc Affiche les informations en utilisant l'interface\n"
473 "versions\n"
474 " 2.4 et les anciennes versions 2.6 du noyau\n"
480 "parameters\n"
482 " -m, --human affiche dans un format lisible pour un humain\n"
483 " pour les options -f, -w et -s (MHz, GHz)\n"
487 msgid " -h, --help Prints out this screen\n"
488 msgstr " -h, --help affiche l'aide-m�moire\n"
493 "If no argument or only the -c, --cpu parameter is given, debug output about\n"
494 "cpufreq is printed which is useful e.g. for reporting bugs.\n"
496 "Par d�faut, les informations de d�boguage seront affich�es si aucun\n"
497 "argument, ou bien si seulement l'argument -c (--cpu) est donn�, afin de\n"
498 "faciliter les rapports de bogues par exemple\n"
503 "For the arguments marked with *, omitting the -c or --cpu argument is\n"
504 "equivalent to setting it to zero\n"
505 msgstr "Les arguments avec un * utiliseront le CPU 0 si -c (--cpu) est omis\n"
511 "argument\n"
512 msgstr "Cette option est incompatible avec --cpu\n"
517 "You can't specify more than one --cpu parameter and/or\n"
518 "more than one output-specific argument\n"
520 "On ne peut indiquer plus d'un param�tre --cpu, tout comme l'on ne peut\n"
521 "sp�cifier plus d'un argument de formatage\n"
526 msgid "invalid or unknown argument\n"
527 msgstr "option invalide\n"
531 msgid "couldn't analyze CPU %d as it doesn't seem to be present\n"
532 msgstr "analyse du CPU %d impossible puisqu'il ne semble pas �tre pr�sent\n"
536 msgid "analyzing CPU %d:\n"
537 msgstr "analyse du CPU %d :\n"
541 msgid "Usage: cpupower frequency-set [options]\n"
542 msgstr "Usage : cpufreq-set [options]\n"
548 "select\n"
550 " -d FREQ, --min FREQ nouvelle fr�quence minimale du CPU � utiliser\n"
551 " par le r�gulateur\n"
557 "select\n"
559 " -u FREQ, --max FREQ nouvelle fr�quence maximale du CPU � utiliser\n"
560 " par le r�gulateur\n"
564 msgid " -g GOV, --governor GOV new cpufreq governor\n"
565 msgstr " -g GOV, --governor GOV active le r�gulateur GOV\n"
570 " -f FREQ, --freq FREQ specific frequency to be set. Requires userspace\n"
571 " governor to be available and loaded\n"
573 " -f FREQ, --freq FREQ fixe la fr�quence du processeur � FREQ. Il faut\n"
574 " que le r�gulateur � userspace � soit disponible \n"
575 " et activ�.\n"
579 msgid " -r, --related Switches all hardware-related CPUs\n"
584 msgid " -h, --help Prints out this screen\n"
585 msgstr " -h, --help affiche l'aide-m�moire\n"
590 "Notes:\n"
591 "1. Omitting the -c or --cpu argument is equivalent to setting it to \"all\"\n"
592 msgstr "Les arguments avec un * utiliseront le CPU 0 si -c (--cpu) est omis\n"
598 "parameter\n"
599 " except the -c CPU, --cpu CPU parameter\n"
600 "3. FREQuencies can be passed in Hz, kHz (default), MHz, GHz, or THz\n"
601 " by postfixing the value with the wanted unit name, without any space\n"
602 " (FREQuency in kHz =^ Hz * 0.001 =^ MHz * 1000 =^ GHz * 1000000).\n"
604 "Remarque :\n"
605 "1. Le CPU num�ro 0 sera utilis� par d�faut si -c (ou --cpu) est omis ;\n"
606 "2. l'argument -f FREQ (ou --freq FREQ) ne peut �tre utilis� qu'avec --cpu ;\n"
608 "espace\n"
609 " les valeurs par hz, kHz (par d�faut), MHz, GHz ou THz\n"
610 " (kHz =^ Hz * 0.001 =^ MHz * 1000 =^ GHz * 1000000).\n"
615 "Error setting new values. Common errors:\n"
616 "- Do you have proper administration rights? (super-user?)\n"
617 "- Is the governor you requested available and modprobed?\n"
618 "- Trying to set an invalid policy?\n"
620 "available,\n"
622 "frequency\n"
623 " or because the userspace governor isn't loaded?\n"
625 "En ajustant les nouveaux param�tres, une erreur est apparue. Les sources\n"
626 "d'erreur typique sont :\n"
627 "- droit d'administration insuffisant (�tes-vous root ?) ;\n"
628 "- le r�gulateur choisi n'est pas disponible, ou bien n'est pas disponible "
629 "en\n"
630 " tant que module noyau ;\n"
631 "- la tactique n'est pas disponible ;\n"
632 "- vous voulez utiliser l'option -f/--freq, mais le r�gulateur � userspace �\n"
633 " n'est pas disponible, par exemple parce que le mat�riel ne le supporte\n"
634 " pas, ou bien n'est tout simplement pas charg�.\n"
638 msgid "wrong, unknown or unhandled CPU?\n"
639 msgstr "CPU inconnu ou non support� ?\n"
644 "the -f/--freq parameter cannot be combined with -d/--min, -u/--max or\n"
645 "-g/--governor parameters\n"
647 "l'option -f/--freq est incompatible avec les options -d/--min, -u/--max et\n"
648 "-g/--governor\n"
653 "At least one parameter out of -f/--freq, -d/--min, -u/--max, and\n"
654 "-g/--governor must be passed\n"
656 "L'un de ces param�tres est obligatoire : -f/--freq, -d/--min, -u/--max et\n"
657 "-g/--governor\n"
661 msgid "Setting cpu: %d\n"
666 msgid "Usage: cpupower set [ -b val ] [ -m val ] [ -s val ]\n"
672 " -b, --perf-bias [VAL] Sets CPU's power vs performance policy on some\n"
673 " Intel models [0-15], see manpage for details\n"
679 " -m, --sched-mc [VAL] Sets the kernel's multi core scheduler policy.\n"
686 "policy.\n"
691 msgid "--perf-bias param out of range [0-%d]\n"
696 msgid "--sched-mc param out of range [0-%d]\n"
701 msgid "--sched-smt param out of range [0-%d]\n"
706 msgid "Error setting sched-mc %s\n"
711 msgid "Error setting sched-smt %s\n"
716 msgid "Error setting perf-bias value on CPU %d\n"
721 msgid "Usage: cpupower info [ -b ] [ -m ] [ -s ]\n"
727 " -b, --perf-bias Gets CPU's power vs performance policy on some\n"
728 " Intel models [0-15], see manpage for details\n"
733 msgid " -m, --sched-mc Gets the kernel's multi core scheduler policy.\n"
734 msgstr " -p, --policy Affiche la tactique actuelle de cpufreq *\n"
739 " -s, --sched-smt Gets the kernel's thread sibling scheduler policy.\n"
745 "\n"
746 "Passing no option will show all info, by default only on core 0\n"
757 msgid "not supported\n"
767 msgid "Intel's performance bias setting needs root privileges\n"
772 msgid "System does not support Intel's performance bias setting\n"
777 msgid "Could not read perf-bias value\n"
782 msgid "perf-bias: %d\n"
787 msgid "Analyzing CPU %d:\n"
788 msgstr "analyse du CPU %d :\n"
792 msgid "CPU %u: No idle states\n"
797 msgid "CPU %u: Can't read idle state info\n"
802 msgid "Could not determine max idle state %u\n"
807 msgid "Number of idle states: %d\n"
817 msgid "Flags/Description: %s\n"
822 msgid "Latency: %lu\n"
827 msgid "Usage: %lu\n"
832 msgid "Duration: %llu\n"
837 msgid "Could not determine cpuidle driver\n"
842 msgid "CPUidle driver: %s\n"
843 msgstr " pilote : %s\n"
847 msgid "Could not determine cpuidle governor\n"
852 msgid "CPUidle governor: %s\n"
857 msgid "CPU %u: Can't read C-state info\n"
860 #. printf("Cstates: %d\n", cstates);
863 msgid "active state: C0\n"
868 msgid "max_cstate: C%u\n"
873 msgid "maximum allowed latency: %lu usec\n"
878 msgid "states:\t\n"
903 msgid "duration[%020Lu] \n"
908 msgid "Usage: cpupower idleinfo [options]\n"
909 msgstr "Usage : cpufreq-info [options]\n"
913 msgid " -s, --silent Only show general C-state information\n"
914 msgstr " -e, --debug Afficher les informations de d�boguage\n"
920 "acpi/processor/*/power\n"
921 " interface in older kernels\n"
923 " -o, --proc Affiche les informations en utilisant l'interface\n"
925 "versions\n"
926 " 2.4 et les anciennes versions 2.6 du noyau\n"
930 msgid "You can't specify more than one output-specific argument\n"
932 "On ne peut indiquer plus d'un param�tre --cpu, tout comme l'on ne peut\n"
933 "sp�cifier plus d'un argument de formatage\n"
937 #~ "about\n"
940 #~ "affich�e\n"
944 #~ "modified\n"
946 #~ " -c CPU, --cpu CPU num�ro du CPU � prendre en compte pour les\n"
947 #~ " changements\n"