Lines Matching refs:operating

13 Binding 1: operating-points
19 - operating-points: An array of 2-tuples items, and each item consists
30 	operating-points = <
39 Binding 2: operating-points-v2
42 * Property: operating-points-v2
44 Devices supporting OPPs must set their "operating-points-v2" property with
46 find the operating points for the device.
50 accompanied by a corresponding "operating-points-names" property, to uniquely
55 and should have a compatible description like: "operating-points-v2-<vendor>".
58 - operating-points-names: Names of OPP tables (required if multiple OPP
70   "operating-points-v2".
105   maximum operating temperature range etc.) as necessary. This may be used to
106   set the most efficient regulator operating mode.
119   available on some platforms, where the device can run over its operating
142 			operating-points-v2 = <&cpu0_opp_table>;
152 			operating-points-v2 = <&cpu0_opp_table>;
157 		compatible = "operating-points-v2";
197 			operating-points-v2 = <&cpu_opp_table>;
207 			operating-points-v2 = <&cpu_opp_table>;
217 			operating-points-v2 = <&cpu_opp_table>;
227 			operating-points-v2 = <&cpu_opp_table>;
232 		compatible = "operating-points-v2";
277 			operating-points-v2 = <&cluster0_opp>;
287 			operating-points-v2 = <&cluster0_opp>;
297 			operating-points-v2 = <&cluster1_opp>;
307 			operating-points-v2 = <&cluster1_opp>;
312 		compatible = "operating-points-v2";
338 		compatible = "operating-points-v2";
373 			operating-points-v2 = <&cpu0_opp_table>;
378 		compatible = "operating-points-v2";
429 			operating-points-v2 = <&cpu0_opp_table_slow>, <&cpu0_opp_table_fast>;
430 			operating-points-names = "slow", "fast";
435 		compatible = "operating-points-v2";
451 		compatible = "operating-points-v2";