Lines Matching refs:one
30 control one or more internal sensors.
35 Size: one cell nodes with only one sensor, and at least 1 on nodes
65 Size: one cell to specify minimum and maximum cooling state used
75 Size: one cell
79 Size: one cell
90 Size: one cell
94 Size: one cell
122 Size: one cell The contribution is a ratio of the sum
135 thermal zone node must contain, apart from its own properties, one sub-node
136 containing trip nodes and one sub-node containing all the zone cooling maps.
141 Size: one cell
145 Size: one cell
160 - coefficients: An array of integers (one signed cell) containing
162 Elem size: one cell the sensors listed in the thermal-sensors property.
173 Size: one cell control temperature. For reference, the
204 The CPU thermal zone example below describes how to setup one thermal zone
205 using one single sensor as temperature source and many cooling devices and
422 In the example above, there is one bandgap IC which has the capability to
425 hotspots: one for CPU thermal zone, one for GPU thermal zone and the
438 (c) - Several sensors within one single thermal zone
440 The example below illustrates how to use more than one sensor within
441 one thermal zone.
488 In some cases, there is a need to use more than one sensor to extrapolate
509 The board thermal example below illustrates how to setup one thermal zone
604 sensors used to monitor different zones, one of them is composed by several sensors and