Lines Matching refs:used

15 - thermal sensors: devices which may be used to take temperature
17 - cooling devices: devices which may be used to dissipate heat.
20 - cooling maps: used to describe links between trip points and cooling devices;
21 - thermal zones: used to describe thermal data within the hardware;
65   Size: one cell      	to specify minimum and maximum cooling state used
111   Type: phandle +	referring to which cooling device is used in this
114 			is the maximum cooling state used in this map.
127 (i)   - minimum state allowed for minimum cooling state used in the reference.
128 (ii)  - maximum state allowed for maximum cooling state used in the reference.
148   Type: list of 	used while monitoring the thermal zone.
156   Type: sub-node	map nodes, used to describe the relation between trips
164 			is not specified. A simple linear polynomial is used:
215 	 * used as OPP indexes. The minimum cooling state is 0, which means
305 used to monitor the zone 'cpu-thermal' using its sole sensor. A fan
307 different cooling states 0-9. It is used to remove the heat out of
310 at 90C, as an example of active cooling. The same cooling device is used at
431 specifier as sensor ID. In the example, then, <bandgap 0> is used to
432 monitor CPU thermal zone, <bandgap 1> is used to monitor GPU thermal
433 zone and <bandgap 2> is used to monitor DSP thermal zone. Each zone
491 close to CPU hotspot and together with internal CPU sensor, it is used
496 In other context, the same idea can be used to add fixed offset. For instance,
604 sensors used to monitor different zones, one of them is composed by several sensors and