Lines Matching refs:of
4 - compatible: should be one of:
10 - reg: base address and length of the registers
14 - phy_type: the type of the phy connected to the core. Should be one
15 of "utmi", "utmi_wide", "ulpi", "serial" or "hsic". Without this
17 - dr_mode: One of "host", "peripheral" or "otg". Defaults to "otg"
21 - fsl,usbphy: phandle of usb phy that connects to the port. Use "phys" instead.
35 spec for meaning of each value. If this property is not existed, it
38 (4 bytes), This register represents the maximum length of a the burst
40 bus, the value of this property will only take effect if property
42 default of the hardware implementation will be used.
44 (4 bytes), This register represents the maximum length of a the burst
46 the value of this property will only take effect if property
48 default of the hardware implementation will be used.
52 of the external connector devices is not required, empty <0> phandle should
58 - fsl,usbmisc: phandler of non-core register device, with one
74 /* Incremental burst of unspecified length */