Lines Matching refs:eth0
732 A string (eth0, eth2, etc) specifying which slave is the
1070 BONDING_SLAVE0="eth0"
1103 "slave device" is either an interface name, e.g., "eth0", or a device
1183 for eth0 would be named /etc/sysconfig/network-scripts/ifcfg-eth0.
1186 DEVICE=eth0
1296 devices (presumed to be eth0 and eth1), and have it persist across
1303 ip link set eth0 master bond0
1438 To enslave interface eth0 to bond bond0:
1440 # echo +eth0 > /sys/class/net/bond0/bonding/slaves
1442 To free slave eth0 from bond bond0:
1443 # echo -eth0 > /sys/class/net/bond0/bonding/slaves
1447 /sys/class/net/bond0/slave_eth0 pointing to /sys/class/net/eth0, and
1448 /sys/class/net/eth0/master pointing to /sys/class/net/bond0.
1452 # echo -eth0 > /sys/class/net/eth0/master/bonding/slaves
1453 will free eth0 from whatever bond it is enslaved to, regardless of
1502 To make a simple bond of two e100 devices (presumed to be eth0
1512 echo +eth0 > /sys/class/net/bond0/bonding/slaves
1547 active-backup mode, with eth0 and eth1 as slaves.
1551 bond-slaves eth0 eth1
1554 bond-primary eth0 eth1
1567 auto eth0
1568 iface eth0 inet manual
1570 bond-primary eth0 eth1
1575 bond-primary eth0 eth1
1590 bonded interface in which eth0 connects to a private network, while eth1
1592 traffic over eth0 first, using eth1 only as a fall back, while all other traffic
1607 Currently Active Slave: eth0
1613 Slave Interface: eth0
1725 Currently Active Slave: eth0
1735 Slave Interface: eth0
1751 (MASTER) while eth0 and eth1 are slaves (SLAVE). Notice all slaves of
1763 eth0 Link encap:Ethernet HWaddr 00:C0:F0:1F:37:B4
1948 device bond0 has two slaves, eth0 and eth1, and the routing table is
1953 10.0.0.0 0.0.0.0 255.255.0.0 U 40 0 0 eth0
1961 case, another host on network 10 would use eth0 or eth1 before bond0).
1966 will arrive on a different interface (eth0). This reply looks to ARP
1990 alias eth0 tg3
1995 If neither eth0 and eth1 are slaves to bond0, then when the
1999 when the e1000 driver loads, it will receive eth0 and eth1 for its
2056 only one ipAdEntIfIndex for each IP address. For example, if eth0 and
2057 eth1 are slaves of bond0 and the driver for eth0 is loaded before the
2059 with the eth0 interface. This configuration is shown below, the IP
2060 address 192.168.1.1 has an interface index of 2 which indexes to eth0
2064 interfaces.ifTable.ifEntry.ifDescr.2 = eth0
2081 interfaces.ifTable.ifEntry.ifDescr.3 = eth0
2166 eth0 +-------+ eth1
2246 | |eth0 port1| | to other networks
2273 | |eth0 port1| +-------+ Host B |
2595 BladeCenter chassis, the eth0 port of all JS20 blades is hard wired to
2620 modules 1 and 2. In this configuration, the eth0 and eth1 ports of a
2626 switch. By using PMs in I/O module #1 and #2, the eth0 and eth1
2673 ethernet (eth0) only, therefore, any loss of link to eth0 will result
2786 from the bond (`ifenslave -d bond0 eth0'). The bonding driver will