Lines Matching refs:eth0
41 3. ifconfig eth0 up 10.xxx.xxx.xxx netmask 255.0.0.0
44 Now eth0 should active, you can test it by "ping" or get more information by
49 alias eth0 dl2k
51 7. Run "netconfig" or "netconf" to create configuration script ifcfg-eth0
120 eth0, eth1, etc. To bring the NIC into an operational state,
123 ifconfig eth0 up
128 ifup eth0
136 ifdown eth0
137 ifconfig eth0 down
164 where ethx will be eth0 if the NIC is the only ethernet adapter, eth1 if
249 DEVICE=eth0