Lines Matching refs:suspended

33 component is "suspended" it is in a nonfunctional low-power state; it
34 might even be turned off completely.  A suspended component can be
38 suspended; an example would be reducing the CPU's clock rate.  This
41 When the parts being suspended include the CPU and most of the rest of
64 When a device has been suspended, it generally doesn't resume until
66 suspended, it generally doesn't resume until the user tells it to, say
73 device is enabled for remote wakeup and it is suspended, it may resume
75 event.  Examples include a suspended keyboard resuming when a key is
76 pressed, or a suspended USB hub resuming when a device is plugged in.
83 anything important and thus is a candidate for being suspended.  The
87 unless all the devices plugged into that hub are already suspended.)
150 		device is next suspended.  (If the setting is changed
151 		while the device is suspended, the change won't take
169 		suspended and autoresume was not allowed.  This
275 a number of keyboards show that typing on a suspended keyboard, while
301 	device is going to be suspended.  If the driver returns a
317 If the device is disconnected or powered down while it is suspended,
334 methods get called when the interfaces are suspended or resumed.  In
338 interfaces are suspended when the device itself is suspended and all
378 	does an autoresume if the device is suspended.  If the
497 possible, the device should remain suspended following the system
506 For example, a suspended device may send a remote-wakeup signal while
599 rules and require the attached child device and all descendants to be suspended.
605 unbound interface device is suspended by default.  When unbinding, be careful
667 		Once all children and descendants have suspended the
675 		or 'suspended' (logically off).  There is no indication to
726 		reflects the 'suspended' state.  Default