Lines Matching refs:registers

1 PVR350 Video decoder registers 0x02002800 -> 0x02002B00
5 and omissions. Some registers have no obvious effect so it's hard to say what
7 sequence. Horizontal filter setup is one example, with six registers working
9 indexed colour palette is much easier to set at just two registers, but again
12 Some registers are fussy about what they are set to. Load in a bad value & the
14 is required. For registers containing size information, setting them to 0 is
15 generally a bad idea. For other control registers i.e. 2878, you'll only find
49      These six registers control the horizontal aliasing filter for the Y plane.
50      The first five registers must all be loaded before accessing the trigger
83      These six registers control the horizontal aliasing for the UV plane.
102      NOTE: For both registers, the resulting image must be fully visible on
167      Most of these registers either control horizontal scaling, or appear linked
169      registers can be calculated from that one. You must also remember to
422      These three registers control the vertical aliasing filter for the Y plane.
424      difference is that there are only two registers to set before accessing
441      These three registers control the vertical aliasing filter for the UV
458      NOTE: For both registers, the resulting image must be fully visible on
521      Most of these registers either control vertical scaling, or appear linked
523      registers can be calculated from that one. You must also remember to
581      These two registers shift the Y plane up. The higher the number, the
591      These two registers shift the UV plane up. The higher the number, the
704      For both registers, (0,0) = top left corner of the display area. These
705      registers do not control the osd size, only where it's positioned & how