27       KERN_INFO DRV_NAME " " DRV_VERSION " " DRV_RELDATE "\n";
293 	printk (KERN_INFO "%s: %s, %pM, IRQ %d\n",  in rio_probe1()
296 		printk(KERN_INFO "tx_coalesce:\t%d packets\n",  in rio_probe1()
299 		printk(KERN_INFO  in rio_probe1()
304 		printk(KERN_INFO "vlan(id):\t%d\n", np->vlan);  in rio_probe1()
544 		printk(KERN_INFO "Try to recover rx ring exhausted...\n");  in rio_timer()
555 					printk (KERN_INFO  in rio_timer()
582 	printk (KERN_INFO "%s: Tx timed out (%4.4x), is buffer full?\n",  in rio_tx_timeout()
946 				printk (KERN_INFO  in receive_packet()
978 			printk (KERN_INFO "%s: Link up\n", dev->name);  in rio_error()
998 			printk (KERN_INFO "%s: Link off\n", dev->name);  in rio_error()
1471 			printk (KERN_INFO "Auto 1000 Mbps, Full duplex\n");  in mii_get_media()
1475 			printk (KERN_INFO "Auto 1000 Mbps, Half duplex\n");  in mii_get_media()
1479 			printk (KERN_INFO "Auto 100 Mbps, Full duplex\n");  in mii_get_media()
1483 			printk (KERN_INFO "Auto 100 Mbps, Half duplex\n");  in mii_get_media()
1487 			printk (KERN_INFO "Auto 10 Mbps, Full duplex\n");  in mii_get_media()
1491 			printk (KERN_INFO "Auto 10 Mbps, Half duplex\n");  in mii_get_media()
1505 			printk (KERN_INFO "Operating at 1000 Mbps, ");  in mii_get_media()
1508 			printk (KERN_INFO "Operating at 100 Mbps, ");  in mii_get_media()
1511 			printk (KERN_INFO "Operating at 10 Mbps, ");  in mii_get_media()
1520 		printk(KERN_INFO "Enable Tx Flow Control\n");  in mii_get_media()
1522 		printk(KERN_INFO "Disable Tx Flow Control\n");  in mii_get_media()
1524 		printk(KERN_INFO "Enable Rx Flow Control\n");  in mii_get_media()
1526 		printk(KERN_INFO "Disable Rx Flow Control\n");  in mii_get_media()
1598 			printk (KERN_INFO "Manual 100 Mbps, ");  in mii_set_media()
1600 			printk (KERN_INFO "Manual 10 Mbps, ");  in mii_set_media()
1641 			printk (KERN_INFO "Auto 1000 Mbps, Full duplex\n");  in mii_get_media_pcs()
1644 			printk (KERN_INFO "Auto 1000 Mbps, half duplex\n");  in mii_get_media_pcs()
1657 		printk (KERN_INFO "Operating at 1000 Mbps, ");  in mii_get_media_pcs()
1665 		printk(KERN_INFO "Enable Tx Flow Control\n");  in mii_get_media_pcs()
1667 		printk(KERN_INFO "Disable Tx Flow Control\n");  in mii_get_media_pcs()
1669 		printk(KERN_INFO "Enable Rx Flow Control\n");  in mii_get_media_pcs()
1671 		printk(KERN_INFO "Disable Rx Flow Control\n");  in mii_get_media_pcs()
1714 			printk (KERN_INFO "Manual full duplex\n");  in mii_set_media_pcs()
1717 			printk (KERN_INFO "Manual half duplex\n");  in mii_set_media_pcs()