179 				mlx4_err(dev, "Only same port types supported on this HCA, aborting\n");  in mlx4_check_port_params()
187 			mlx4_err(dev, "Requested port type for port %d is not supported on this HCA\n",  in mlx4_check_port_params()
215 			mlx4_err(dev, "QUERY_DEV_CAP command failed, aborting.\n");  in mlx4_query_func()
295 		mlx4_err(dev, "QUERY_PORT command failed.\n");  in mlx4_dev_port()
327 		mlx4_err(dev, "QUERY_DEV_CAP command failed, aborting\n");  in mlx4_dev_cap()
333 		mlx4_err(dev, "HCA minimum page size of %d bigger than kernel PAGE_SIZE of %ld, aborting\n",  in mlx4_dev_cap()
338 		mlx4_err(dev, "HCA has %d ports, but we only support %d, aborting\n",  in mlx4_dev_cap()
344 …mlx4_err(dev, "HCA reported UAR size of 0x%x bigger than PCI resource 2 size of 0x%llx, aborting\n…  in mlx4_dev_cap()
359 			mlx4_err(dev, "QUERY_PORT command failed, aborting\n");  in mlx4_dev_cap()
782 		mlx4_err(dev, "QUERY_HCA command failed, aborting\n");  in mlx4_slave_cap()
790 		mlx4_err(dev, "Unknown hca global capabilities\n");  in mlx4_slave_cap()
802 		mlx4_err(dev, "QUERY_DEV_CAP command failed, aborting\n");  in mlx4_slave_cap()
808 		mlx4_err(dev, "QUERY_FW command failed: could not get FW version\n");  in mlx4_slave_cap()
813 		mlx4_err(dev, "HCA minimum page size of %d bigger than kernel PAGE_SIZE of %ld, aborting\n",  in mlx4_slave_cap()
823 		mlx4_err(dev, "UAR size:%d != kernel PAGE_SIZE of %ld\n",  in mlx4_slave_cap()
831 		mlx4_err(dev, "QUERY_FUNC_CAP general command failed, aborting (%d)\n",  in mlx4_slave_cap()
838 		mlx4_err(dev, "Unknown pf context behaviour %x known flags %x\n",  in mlx4_slave_cap()
861 		mlx4_err(dev, "HCA has %d ports, but we only support %d, aborting\n",  in mlx4_slave_cap()
884 			mlx4_err(dev, "QUERY_FUNC_CAP port command failed for port %d, aborting (%d)\n",  in mlx4_slave_cap()
906 …mlx4_err(dev, "HCA reported UAR region size of 0x%x bigger than PCI resource 2 size of 0x%llx, abo…  in mlx4_slave_cap()
1016 				mlx4_err(dev, "Failed to set port %d, aborting\n",  in mlx4_change_port_types()
1024 			mlx4_err(dev, "Failed to register device\n");  in mlx4_change_port_types()
1077 		mlx4_err(mdev, "%s is not supported port type\n", buf);  in set_port_type()
1104 …mlx4_err(mdev, "Auto sensing is not supported on this HCA. Set only 'eth' or 'ib' for both ports (…  in set_port_type()
1199 		mlx4_err(mdev, "%s is invalid IBTA mtu\n", buf);  in set_port_ib_mtu()
1212 			mlx4_err(mdev, "Failed to set port %d, aborting\n",  in set_port_ib_mtu()
1238 		mlx4_err(dev, "Failed to bond device: %d\n", ret);  in mlx4_bond()
1257 		mlx4_err(dev, "Failed to unbond device: %d\n", ret);  in mlx4_unbond()
1300 			mlx4_err(dev, "Failed to change port mape: %d\n", err);  in mlx4_port_map_set()
1317 		mlx4_err(dev, "Couldn't allocate FW area, aborting\n");  in mlx4_load_fw()
1323 		mlx4_err(dev, "MAP_FA command failed, aborting\n");  in mlx4_load_fw()
1329 		mlx4_err(dev, "RUN_FW command failed, aborting\n");  in mlx4_load_fw()
1412 		mlx4_err(dev, "SET_ICM_SIZE command failed, aborting\n");  in mlx4_init_icm()
1423 		mlx4_err(dev, "Couldn't allocate aux memory, aborting\n");  in mlx4_init_icm()
1429 		mlx4_err(dev, "MAP_ICM_AUX command failed, aborting\n");  in mlx4_init_icm()
1435 		mlx4_err(dev, "Failed to map cMPT context memory, aborting\n");  in mlx4_init_icm()
1445 		mlx4_err(dev, "Failed to map EQ context memory, aborting\n");  in mlx4_init_icm()
1466 		mlx4_err(dev, "Failed to map MTT context memory, aborting\n");  in mlx4_init_icm()
1476 		mlx4_err(dev, "Failed to map dMPT context memory, aborting\n");  in mlx4_init_icm()
1487 		mlx4_err(dev, "Failed to map QP context memory, aborting\n");  in mlx4_init_icm()
1498 		mlx4_err(dev, "Failed to map AUXC context memory, aborting\n");  in mlx4_init_icm()
1509 		mlx4_err(dev, "Failed to map ALTC context memory, aborting\n");  in mlx4_init_icm()
1520 		mlx4_err(dev, "Failed to map RDMARC context memory, aborting\n");  in mlx4_init_icm()
1530 		mlx4_err(dev, "Failed to map CQ context memory, aborting\n");  in mlx4_init_icm()
1540 		mlx4_err(dev, "Failed to map SRQ context memory, aborting\n");  in mlx4_init_icm()
1558 		mlx4_err(dev, "Failed to map MCG context memory, aborting\n");  in mlx4_init_icm()
1775 	mlx4_err(dev, "Communication channel is offline.\n");  in mlx4_comm_check_offline()
1811 		mlx4_err(dev, "PF is not responsive, skipping initialization\n");  in mlx4_init_slave()
1837 		mlx4_err(dev, "slave driver version is not supported by the master\n");  in mlx4_init_slave()
1925 				mlx4_err(dev, "DMFS high rate mode not supported\n");  in choose_steering_mode()
1994 			mlx4_err(dev,  in mlx4_validate_optimized_steering()
2001 			mlx4_err(dev,  in mlx4_validate_optimized_steering()
2024 				mlx4_err(dev, "QUERY_FW command failed, aborting\n");  in mlx4_init_fw()
2030 			mlx4_err(dev, "Failed to start FW, aborting\n");  in mlx4_init_fw()
2058 			mlx4_err(dev, "QUERY_DEV_CAP command failed, aborting\n");  in mlx4_init_hca()
2071 			mlx4_err(dev, "Fail to get physical port id\n");  in mlx4_init_hca()
2108 			mlx4_err(dev, "INIT_HCA command failed, aborting\n");  in mlx4_init_hca()
2115 				mlx4_err(dev, "QUERY_FUNC command failed, aborting.\n");  in mlx4_init_hca()
2132 				mlx4_err(dev, "QUERY_HCA command failed, disable timestamp\n");  in mlx4_init_hca()
2144 				mlx4_err(dev,  in mlx4_init_hca()
2152 				mlx4_err(dev, "Failed to map internal clock. Timestamping is not supported\n");  in mlx4_init_hca()
2177 				mlx4_err(dev, "Failed to initialize slave\n");  in mlx4_init_hca()
2183 			mlx4_err(dev, "Failed to obtain slave caps\n");  in mlx4_init_hca()
2197 		mlx4_err(dev, "QUERY_ADAPTER command failed, aborting\n");  in mlx4_init_hca()
2204 		mlx4_err(dev, "Failed to query CONFIG_DEV parameters\n");  in mlx4_init_hca()
2301 			mlx4_err(dev, "%s: failed to allocate default counter port %d err %d\n",  in mlx4_allocate_default_counters()
2444 		mlx4_err(dev, "Failed to initialize user access region table, aborting\n");  in mlx4_setup_hca()
2450 		mlx4_err(dev, "Failed to allocate driver access region, aborting\n");  in mlx4_setup_hca()
2456 		mlx4_err(dev, "Couldn't map kernel access region, aborting\n");  in mlx4_setup_hca()
2463 		mlx4_err(dev, "Failed to initialize protection domain table, aborting\n");  in mlx4_setup_hca()
2469 		mlx4_err(dev, "Failed to initialize reliable connection domain table, aborting\n");  in mlx4_setup_hca()
2475 		mlx4_err(dev, "Failed to initialize memory region table, aborting\n");  in mlx4_setup_hca()
2482 			mlx4_err(dev, "Failed to initialize multicast group table, aborting\n");  in mlx4_setup_hca()
2487 			mlx4_err(dev, "Failed in config_mad_demux, aborting\n");  in mlx4_setup_hca()
2494 		mlx4_err(dev, "Failed to initialize event queue table, aborting\n");  in mlx4_setup_hca()
2500 		mlx4_err(dev, "Failed to switch to event-driven firmware commands, aborting\n");  in mlx4_setup_hca()
2511 			mlx4_err(dev, "NOP command failed to generate interrupt (IRQ %d), aborting\n",  in mlx4_setup_hca()
2513 			mlx4_err(dev, "BIOS or ACPI interrupt routing problem?\n");  in mlx4_setup_hca()
2523 		mlx4_err(dev, "Failed to initialize completion queue table, aborting\n");  in mlx4_setup_hca()
2529 		mlx4_err(dev, "Failed to initialize shared receive queue table, aborting\n");  in mlx4_setup_hca()
2535 		mlx4_err(dev, "Failed to initialize queue pair table, aborting\n");  in mlx4_setup_hca()
2542 			mlx4_err(dev, "Failed to initialize counters table, aborting\n");  in mlx4_setup_hca()
2549 		mlx4_err(dev, "Failed to allocate default counters, aborting\n");  in mlx4_setup_hca()
2582 				mlx4_err(dev, "Failed to set port %d, aborting\n",  in mlx4_setup_hca()
2788 		mlx4_err(dev, "Failed to create file for port %d\n", port);  in mlx4_init_port_info()
2806 		mlx4_err(dev, "Failed to create mtu file for port %d\n", port);  in mlx4_init_port_info()
2900 		mlx4_err(dev, "Failed to obtain ownership bit\n");  in mlx4_get_ownership()
2920 		mlx4_err(dev, "Failed to obtain ownership bit\n");  in mlx4_free_ownership()
2950 …	mlx4_err(dev, "SR-IOV was already enabled, but with num_vfs (%d) different than requested (%d)\n",  in mlx4_enable_sriov()
2958 		mlx4_err(dev, "Failed to allocate memory for VFs\n");  in mlx4_enable_sriov()
2964 			mlx4_err(dev, "requested vfs (%d) > available vfs (%d). Continuing without SR_IOV\n",  in mlx4_enable_sriov()
2973 		mlx4_err(dev, "Failed to enable SR-IOV, continuing without SR-IOV (err = %d)\n",  in mlx4_enable_sriov()
3005 		mlx4_err(dev, "Requested %d VFs, but FW does not support more than 64\n",  in mlx4_check_dev_cap()
3069 			mlx4_err(dev, "Failed to reset HCA, aborting\n");  in mlx4_load_one()
3090 		mlx4_err(dev, "Failed to init command interface, aborting\n");  in mlx4_load_one()
3105 				mlx4_err(dev, "Failed to init slave mfunc interface, aborting\n");  in mlx4_load_one()
3113 		mlx4_err(dev, "Failed to init fw, aborting.\n");  in mlx4_load_one()
3129 				mlx4_err(dev, "QUERY_DEV_CAP command failed, aborting.\n");  in mlx4_load_one()
3146 					mlx4_err(dev, "Invalid SRIOV state\n");  in mlx4_load_one()
3151 					mlx4_err(dev, "Failed to reset HCA, aborting.\n");  in mlx4_load_one()
3164 				mlx4_err(dev, "QUERY_DEV_CAP command failed, aborting.\n");  in mlx4_load_one()
3208 				mlx4_err(dev, "Failed to init VHCR command interface, aborting\n");  in mlx4_load_one()
3216 			mlx4_err(dev, "Invalid SRIOV state\n");  in mlx4_load_one()
3234 			mlx4_err(dev,  in mlx4_load_one()
3258 			mlx4_err(dev, "Failed to init master mfunc interface, aborting.\n");  in mlx4_load_one()
3274 		mlx4_err(dev, "INTx is not supported in multi-function mode, aborting\n");  in mlx4_load_one()
3303 			mlx4_err(dev, " Failed to arm comm channel eq: %x\n",  in mlx4_load_one()
3762 		mlx4_err(dev, "%s: ERROR: mlx4_load_one failed, pci_name=%s, err=%d\n",  in mlx4_restart_one()
3770 		mlx4_err(dev, "could not restore original port types (%d)\n",  in mlx4_restart_one()
3829 	mlx4_err(persist->dev, "mlx4_pci_err_detected was called\n");  in mlx4_pci_err_detected()
3853 	mlx4_err(dev, "mlx4_pci_slot_reset was called\n");  in mlx4_pci_slot_reset()
3856 		mlx4_err(dev, "Can not re-enable device, ret=%d\n", ret);  in mlx4_pci_slot_reset()
3872 			mlx4_err(dev, "%s: mlx4_load_one failed, ret=%d\n",  in mlx4_pci_slot_reset()
3881 			mlx4_err(dev, "could not restore original port types (%d)\n", ret);  in mlx4_pci_slot_reset()