2406 	u8 bval;  in data_io_transfer()  local
2572 		bval = (io_dir & DMACMD_DIR) ? SCMD_FIFO_IN : SCMD_FIFO_OUT;  in data_io_transfer()
2573 		DC395x_write8(acb, TRM_S1040_SCSI_COMMAND, bval);  in data_io_transfer()
2722 	u8 bval;  in msgin_set_sync()  local
2741 	bval = 0;  in msgin_set_sync()
2742 	while (bval < 7 && (srb->msgin_buf[3] > clock_period[bval]  in msgin_set_sync()
2744 			    clock_period[bval]))  in msgin_set_sync()
2745 		bval++;  in msgin_set_sync()
2746 	if (srb->msgin_buf[3] < clock_period[bval])  in msgin_set_sync()
2749 			clock_period[bval] << 2);  in msgin_set_sync()
2750 	srb->msgin_buf[3] = clock_period[bval];  in msgin_set_sync()
2752 	dcb->sync_period |= ALT_SYNC | bval;  in msgin_set_sync()
3096 			u8 bval = DC395x_read8(acb, TRM_S1040_SCSI_SIGNAL);  in disconnect()  local
3100 			if (bval & 0x40) {  in disconnect()
3103 					bval);  in disconnect()
3606 	u8 bval;  in set_basic_config()  local
3610 		bval = PHASELATCH | INITIATOR | BLOCKRST | PARITYCHECK;  in set_basic_config()
3612 		bval = PHASELATCH | INITIATOR | BLOCKRST;  in set_basic_config()
3614 	DC395x_write8(acb, TRM_S1040_SCSI_CONFIG0, bval);  in set_basic_config()
4311 	u8 bval;  in adapter_print_config()  local
4313 	bval = DC395x_read8(acb, TRM_S1040_GEN_STATUS);  in adapter_print_config()
4315 		((bval & WIDESCSI) ? "(Wide) " : ""));  in adapter_print_config()
4316 	if (!(bval & CON5068))  in adapter_print_config()
4317 		printk("ext%s ", !(bval & EXT68HIGH) ? "68" : "50");  in adapter_print_config()
4318 	if (!(bval & CON68))  in adapter_print_config()
4319 		printk("int68%s ", !(bval & INT68HIGH) ? "" : "(50)");  in adapter_print_config()
4320 	if (!(bval & CON50))  in adapter_print_config()
4322 	if ((bval & (CON5068 | CON50 | CON68)) ==  in adapter_print_config()
4325 	bval = DC395x_read8(acb, TRM_S1040_GEN_CONTROL);  in adapter_print_config()
4327 	if (bval & DIS_TERM)  in adapter_print_config()
4330 		if (bval & AUTOTERM)  in adapter_print_config()
4332 		if (bval & LOW8TERM)  in adapter_print_config()
4334 		if (bval & UP8TERM)  in adapter_print_config()