| /linux-4.1.27/drivers/scsi/pcmcia/ |
| D | nsp_io.h | 21 unsigned int Register,
24 unsigned int Register);
48 unsigned int Register) in nsp_index_read() argument
50 outb(Register, BaseAddr + INDEXREG); in nsp_index_read()
55 unsigned int Register, in nsp_index_write() argument
58 outb(Register, BaseAddr + INDEXREG); in nsp_index_write()
68 unsigned int Register, in nsp_multi_read_1() argument
72 insb(BaseAddr + Register, buf, count); in nsp_multi_read_1()
87 unsigned int Register, in nsp_multi_read_2() argument
91 insw(BaseAddr + Register, buf, count); in nsp_multi_read_2()
[all …]
|
| /linux-4.1.27/firmware/dsp56k/ |
| D | bootstrap.asm | 10 M_BCR EQU $FFFE ; Port A Bus Control Register
11 M_PBC EQU $FFE0 ; Port B Control Register
12 M_PBDDR EQU $FFE2 ; Port B Data Direction Register
13 M_PBD EQU $FFE4 ; Port B Data Register
14 M_PCC EQU $FFE1 ; Port C Control Register
15 M_PCDDR EQU $FFE3 ; Port C Data Direction Register
16 M_PCD EQU $FFE5 ; Port C Data Register
18 M_HCR EQU $FFE8 ; Host Control Register
19 M_HSR EQU $FFE9 ; Host Status Register
20 M_HRX EQU $FFEB ; Host Receive Data Register
[all …]
|
| /linux-4.1.27/Documentation/scsi/ |
| D | hptiop.txt | 3 Controller Register Map
8 BAR0 offset Register
12 BAR2 offset Register
13 0x10 Inbound Message Register 0
14 0x14 Inbound Message Register 1
15 0x18 Outbound Message Register 0
16 0x1C Outbound Message Register 1
17 0x20 Inbound Doorbell Register
18 0x24 Inbound Interrupt Status Register
19 0x28 Inbound Interrupt Mask Register
[all …]
|
| D | sym53c8xx_2.txt | 672 Field H : SCNTL3 Scsi Control Register 3
675 Field I : SCNTL4 Scsi Control Register 4
|
| D | ChangeLog.megaraid_sas | 610 i. Register 16 byte CDB capability with scsi midlayer
|
| D | ncr53c8xx.txt | 1346 Field H : SCNTL3 Scsi Control Register 3
|
| /linux-4.1.27/Documentation/mmc/ |
| D | mmc-dev-attrs.txt | 16 cid Card Identifaction Register
17 csd Card Specific Data Register
18 scr SD Card Configuration Register (SD only)
19 date Manufacturing Date (from CID Register)
20 fwrev Firmware/Product Revision (from CID Register) (SD and MMCv1 only)
21 hwrev Hardware/Product Revision (from CID Register) (SD and MMCv1 only)
22 manfid Manufacturer ID (from CID Register)
23 name Product Name (from CID Register)
24 oemid OEM/Application ID (from CID Register)
25 prv Product Revision (from CID Register) (SD and MMCv4 only)
[all …]
|
| /linux-4.1.27/arch/arm/include/debug/ |
| D | ks8695.S | 27 str \rd, [\rx, #KS8695_URTH] @ Write to Transmit Holding Register
31 1001: ldr \rd, [\rx, #KS8695_URLS] @ Read Line Status Register
37 1001: ldr \rd, [\rx, #KS8695_URLS] @ Read Line Status Register
38 tst \rd, #URLS_URTHRE @ Holding Register empty?
|
| D | at91.S | 38 strb \rd, [\rx, #(AT91_DBGU_THR)] @ Write to Transmitter Holding Register
42 1001: ldr \rd, [\rx, #(AT91_DBGU_SR)] @ Read Status Register
48 1001: ldr \rd, [\rx, #(AT91_DBGU_SR)] @ Read Status Register
|
| D | vf.S | 27 strb \rd, [\rx, #0x7] @ Data Register
31 1001: ldrb \rd, [\rx, #0x4] @ Status Register 1
|
| /linux-4.1.27/Documentation/devicetree/bindings/video/ |
| D | fsl,imx-fb.txt | 19 - fsl,dmacr: DMA Control Register value. This is optional. By default, the
21 - fsl,lpccr: Contrast Control Register value. This property provides the
24 - fsl,lscr1: LCDC Sharp Configuration Register value.
|
| /linux-4.1.27/Documentation/devicetree/bindings/pinctrl/ |
| D | fsl,imx27-pinctrl.txt | 24 Registers: GIUS (GPIO In Use), GPR (General Purpose Register)
30 Register: DDIR
40 3 - Data Register
47 1 - Interrupt Status Register
|
| D | qcom,pmic-mpp.txt | 18 Definition: Register base of the MPP block and length.
|
| D | qcom,pmic-gpio.txt | 22 Definition: Register base of the GPIO block and length.
|
| /linux-4.1.27/Documentation/devicetree/bindings/sound/ |
| D | alc5623.txt | 11 Register. If absent or has the value of 0, the
15 Control Register. If absent or has value 0, the
|
| D | omap-mcpdm.txt | 5 - reg: Register location and size as an array:
|
| D | omap-dmic.txt | 5 - reg: Register location and size as an array:
|
| D | omap-mcbsp.txt | 8 - reg: Register location and size, for OMAP4+ as an array:
|
| /linux-4.1.27/Documentation/devicetree/bindings/rtc/ |
| D | rtc-cmos.txt | 12 called "Register B".
16 "Register A" and "B" are usually initialized by the firmware (BIOS for
|
| D | rtc-omap.txt | 7 This RTC IP has special WAKE-EN Register to enable
|
| /linux-4.1.27/Documentation/devicetree/bindings/arm/hisilicon/ |
| D | hisilicon.txt | 21 - reg : Register address and size
48 - reg : Register address and size
69 - reg : Register address and size
|
| /linux-4.1.27/drivers/mtd/chips/ |
| D | Kconfig | 158 erased. Each Protection Register can be accessed multiple times to
161 Each Protection Register has an associated Lock Register bit. When a
162 Lock Register bit is programmed, the associated Protection Register
164 because the Lock Register bits themselves are OTP, when programmed,
165 Lock Register bits cannot be erased. Therefore, when a Protection
166 Register is locked, it cannot be unlocked.
|
| /linux-4.1.27/Documentation/m68k/ |
| D | README.buddha | 7 Register map of the Buddha IDE controller and the
41 $7fe Speed-select Register: Read & Write
44 $800-$8ff IDE-Select 0 (Port 0, Register set 0)
46 $900-$9ff IDE-Select 1 (Port 0, Register set 1)
48 $a00-$aff IDE-Select 2 (Port 1, Register set 0)
50 $b00-$bff IDE-Select 3 (Port 1, Register set 1)
52 $c00-$cff IDE-Select 4 (Port 2, Register set 0,
55 $d00-$dff IDE-Select 5 (Port 3, Register set 1,
|
| /linux-4.1.27/Documentation/parisc/ |
| D | registers | 1 Register Usage for Linux/PA-RISC
19 CR19 Interrupt Instruction Register
20 CR20 Interrupt Space Register
21 CR21 Interrupt Offset Register
89 Register usage notes, originally from John Marvin, with some additional
|
| /linux-4.1.27/Documentation/devicetree/bindings/video/backlight/ |
| D | lp855x.txt | 13 - rom-addr: Register address of ROM area to be updated (u8)
14 - rom-val: Register value to be updated (u8)
|
| /linux-4.1.27/arch/arm/include/asm/ |
| D | vfpmacros.h | 34 VFPFMRX \tmp, MVFR0 @ Media and VFP Feature Register 0
58 VFPFMRX \tmp, MVFR0 @ Media and VFP Feature Register 0
|
| /linux-4.1.27/drivers/crypto/caam/ |
| D | Kconfig | 77 tristate "Register algorithm implementations with the Crypto API"
91 tristate "Register hash algorithm implementations with Crypto API"
103 tristate "Register caam device for hwrng API"
|
| /linux-4.1.27/Documentation/devicetree/bindings/watchdog/ |
| D | ingenic,jz4740-wdt.txt | 5 reg: Register address and length for watchdog registers
|
| /linux-4.1.27/Documentation/devicetree/bindings/input/ |
| D | gpio-beeper.txt | 3 Register a beeper connected to GPIO pin.
|
| D | st-keyscan.txt | 9 - reg: Register base address and size of st-keyscan controller.
|
| D | nvidia,tegra20-kbc.txt | 8 - reg: Register base address of KBC.
|
| /linux-4.1.27/drivers/net/ethernet/wiznet/ |
| D | Kconfig | 62 using Indirect Mode Address Register and Indirect Mode Data Register,
|
| /linux-4.1.27/arch/arm/mach-shmobile/ |
| D | headsmp-scu.S | 33 ldr r2, [r0, #8] @ SCU Power Status Register
|
| /linux-4.1.27/Documentation/input/ |
| D | sentelic.txt | 484 * Programming Sequence for Register Reading/Writing
487 Register inversion requirement:
494 Register swapping requirement:
501 Register reading sequence:
512 inverted(refer to the 'Register inversion requirement' section),
520 swapped(refer to the 'Register swapping requirement' section),
546 Register writing sequence:
551 inverted(refer to the 'Register inversion requirement' section),
559 swapped(refer to the 'Register swapping requirement' section),
573 inverted(refer to the 'Register inversion requirement' section),
[all …]
|
| D | cma3000_d0x.txt | 87 Register/Platform parameters Description
|
| D | amijoy.txt | 74 Register bits are as follows:
|
| /linux-4.1.27/Documentation/devicetree/bindings/leds/ |
| D | register-bit-led.txt | 1 Device Tree Bindings for Register Bit LEDs
3 Register bit leds are used with syscon multifunctional devices
|
| /linux-4.1.27/arch/cris/arch-v10/lib/ |
| D | hw_settings.S | 40 ; Register values
|
| /linux-4.1.27/Documentation/ABI/testing/ |
| D | sysfs-driver-pciback | 9 Device.Function-Register:Size:Mask (Domain is optional).
|
| /linux-4.1.27/arch/cris/arch-v32/mach-a3/ |
| D | hw_settings.S | 31 ; Register values
|
| /linux-4.1.27/Documentation/devicetree/bindings/timer/ |
| D | brcm,kona-timer.txt | 9 - reg : Register range for the timer
|
| /linux-4.1.27/Documentation/video4linux/cx2341x/ |
| D | fw-memory.txt | 20 (Base Address Register 0). The addresses here are offsets relative to the
35 0x02000000-0x0200ffff Register Space
115 Interrupt Status Register
|
| D | fw-dma.txt | 89 Register 0x0004 holds the DMA Transfer Status:
|
| D | fw-decoder-regs.txt | 168 to it in some way. Register 2854 contains the 'master' value & the other
522 to it in some way. Register 2930 contains the 'master' value & all other
|
| /linux-4.1.27/Documentation/devicetree/bindings/mfd/ |
| D | qcom,tcsr.txt | 1 QCOM Top Control and Status Register
|
| /linux-4.1.27/Documentation/devicetree/bindings/mmc/ |
| D | arasan,sdhci.txt | 12 - reg: From mmc bindings: Register location and length.
|
| D | mmc.txt | 43 - dsr: Value the card's (optional) Driver Stage Register (DSR) should be
|
| /linux-4.1.27/Documentation/devicetree/bindings/iio/adc/ |
| D | rockchip-saradc.txt | 1 Rockchip Successive Approximation Register (SAR) A/D Converter bindings
|
| /linux-4.1.27/Documentation/hwmon/ |
| D | w83795 | 27 Pin | Name | Register | Sysfs attribute
83 Pin | Name | Register | Sysfs attribute
|
| D | w83627ehf | 182 0x50-0x55 and 0x650-0x657 are marked "Test Register" for the EHF, but "Reserved
183 Register" for the DHG
|
| D | w83627hf | 103 Pin | Name | Register | Sysfs attribute
|
| D | smsc47b397 | 99 a. Write the index of the Logical Device Number Configuration Register
|
| D | w83781d | 294 Remark: Register 0x5b is suspected to be temperature type selector. Bit 1
|
| /linux-4.1.27/arch/xtensa/kernel/ |
| D | head.S | 185 movi a2, CCON # MX External Register to Configure Cache
320 movi a2, CCON # MX External Register to Configure Cache
|
| /linux-4.1.27/Documentation/devicetree/bindings/powerpc/fsl/ |
| D | srio.txt | 9 Revision Register (SRIO IPBRR1) Major ID equal to 0x01c0.
12 version in IP Block Revision Register and Y is Minor version. If this
|
| D | dcsr.txt | 2 Debug Control and Status Register (DCSR) Binding
11 Debug Control and Status Register Memory Map
77 Counter Interrupt Status Register (EPCPUISR).
83 Interrupt Status Register (EPISR0,EPISR1).
|
| D | dma.txt | 10 - reg : DMA General Status Register, i.e. DGSR which contains
78 - reg : DMA General Status Register, i.e. DGSR which contains
|
| D | interlaken-lac.txt | 45 IP Block Revision Register (IPBRR0) at offset 0x0BF8.
136 Register (IPBRR0), at offset 0x0BF8, and Y is the Minor version
|
| D | mpic.txt | 146 Error Interrupt Summary Register.
|
| D | mpc5200.txt | 184 "ICTL PerStat, MainStat, CritStat Encoded Register"
|
| /linux-4.1.27/Documentation/devicetree/bindings/mtd/ |
| D | lpc32xx-mlc.txt | 10 User Manual 7.5.14 MLC NAND Timing Register (the values here are specified in
|
| D | fsmc-nand.txt | 40 reg = <0xd1800000 0x1000 /* FSMC Register */
|
| /linux-4.1.27/arch/arm/mach-mvebu/ |
| D | pmsu_ll.S | 18 orr r1, r1, #0x8 @ SCU CPU Power Status Register
|
| /linux-4.1.27/Documentation/devicetree/bindings/net/ |
| D | broadcom-bcm87xx.txt | 24 * Set PMD Digital Control Register for
|
| D | stmmac.txt | 44 available this clock is used for programming the Timestamp Addend Register.
|
| /linux-4.1.27/arch/cris/arch-v32/mach-fs/ |
| D | hw_settings.S | 31 ; Register values
|
| /linux-4.1.27/Documentation/ABI/stable/ |
| D | sysfs-devices-system-cpu | 16 Description: Default value for the Data Stream Control Register (DSCR) on
|
| /linux-4.1.27/arch/arc/kernel/ |
| D | unwind.c | 134 Register, enumerator
672 case Register: in set_rule()
774 Register, in processCFI()
1180 case Register: in arc_unwind()
1218 case Register: in arc_unwind()
1264 case Register: in arc_unwind()
|
| /linux-4.1.27/arch/arm/boot/dts/ |
| D | spear300.dtsi | 40 reg = <0x94000000 0x1000 /* FSMC Register */
|
| D | spear310.dtsi | 35 reg = <0x44000000 0x1000 /* FSMC Register */
|
| D | spear320.dtsi | 42 reg = <0x4c000000 0x1000 /* FSMC Register */
|
| D | spear600.dtsi | 82 reg = <0xd1800000 0x1000 /* FSMC Register */
|
| D | spear13xx.dtsi | 143 reg = <0xb0000000 0x1000 /* FSMC Register*/
|
| D | ste-u300.dts | 280 reg = <0x9f800000 0x1000>, /* FSMC Register*/
|
| D | ste-nomadik-stn8815.dtsi | 633 reg = <0x10100000 0x1000>, /* FSMC Register*/
|
| /linux-4.1.27/Documentation/video4linux/bttv/ |
| D | README.quirks | 51 Device Control Register on page 104.
76 Register on page 104). When in this mode, the arbiter does not pass GNT
|
| /linux-4.1.27/Documentation/xtensa/ |
| D | atomctl.txt | 1 We Have Atomic Operation Control (ATOMCTL) Register.
|
| /linux-4.1.27/Documentation/video4linux/cx88/ |
| D | hauppauge-wintv-cx88-ir.txt | 14 Register 24'h20004 PCI Interrupt Status
|
| /linux-4.1.27/Documentation/video4linux/ |
| D | hauppauge-wintv-cx88-ir.txt | 14 Register 24'h20004 PCI Interrupt Status
|
| /linux-4.1.27/drivers/firmware/efi/ |
| D | Kconfig | 22 tristate "Register efivars backend for pstore"
|
| /linux-4.1.27/arch/arm/mm/ |
| D | proc-v7m.S | 118 @ Configure the System Control Register to ensure 8-byte stack alignment
|
| /linux-4.1.27/drivers/net/ethernet/atheros/atlx/ |
| D | atl2.c | 2227 u16 Register; in get_permanent_address() local
2238 Register = 0; in get_permanent_address()
2246 if (Register == REG_MAC_STA_ADDR) in get_permanent_address()
2248 else if (Register == in get_permanent_address()
2254 Register = (u16) (Control >> 16); in get_permanent_address()
2278 Register = 0; in get_permanent_address()
2284 if (Register == REG_MAC_STA_ADDR) in get_permanent_address()
2286 else if (Register == (REG_MAC_STA_ADDR + 4)) in get_permanent_address()
2291 Register = (u16) (Control >> 16); in get_permanent_address()
|
| /linux-4.1.27/Documentation/x86/ |
| D | mtrr.txt | 1 MTRR (Memory Type Range Register) control
186 fprintf (stderr, "Register: %u disabled\n", gentry.regnum);
189 fprintf (stderr, "Register: %u base: 0x%lx size: 0x%lx type: %s\n",
|
| /linux-4.1.27/arch/sh/kernel/ |
| D | entry-common.S | 322 mov.l @r9, r8 ! Read from TRA (Trap Address) Register
|
| D | head_32.S | 61 ! Initialize Status Register
|
| /linux-4.1.27/drivers/net/ethernet/hp/ |
| D | hp100.c | 2802 int Register; in hp100_RegisterDump() local
2816 for (Register = 0x8; Register < 0x22; Register += 2) { in hp100_RegisterDump()
2818 if (((Register != 0x10) && (Register != 0x12)) || (Page > 0)) { in hp100_RegisterDump()
2819 printk("0x%.2x = 0x%.4x\n", Register, inw(ioaddr + Register)); in hp100_RegisterDump()
|
| /linux-4.1.27/Documentation/networking/ |
| D | fore200e.txt | 40 http://en.wikipedia.org/wiki/FORE_Systems. Register TACTics Online and go to
|
| D | filter.txt | 249 0 x/%x Register X
635 - Register width increases from 32-bit to 64-bit:
819 tracing filters may do to maintain counters of events, for example. Register R9
969 have seven implicit operands. Register R6 is an implicit input that must
970 contain pointer to sk_buff. Register R0 is an implicit output which contains
|
| D | cs89x0.txt | 410 * IO Register Read/Write Test
411 The IO Register Read/Write test insures that the CS8900/20 can be
|
| /linux-4.1.27/Documentation/devicetree/bindings/soc/ti/ |
| D | keystone-navigator-qmss.txt | 34 Register regions should be specified in the following
100 Register regions should be specified in the following
|
| D | keystone-navigator-dma.txt | 43 register regions. Register regions should be specified in the following
|
| /linux-4.1.27/arch/m68k/fpsp040/ |
| D | bindec.S | 222 | Register usage:
285 | Register usage:
357 | Register usage:
617 | Register usage:
|
| D | decbin.S | 130 | Register usage:
475 | Register Usage:
|
| /linux-4.1.27/Documentation/ |
| D | mono.txt | 48 # Register support for .NET CLR binaries
|
| D | smsc_ece1099.txt | 22 of an interrupt, it should first read the Group Interrupt Status Register
|
| D | remoteproc.txt | 108 - Register @rproc with the remoteproc framework, after it has been
|
| D | edac.txt | 96 MSRs Machine Specific Register error cases
|
| /linux-4.1.27/Documentation/devicetree/bindings/bus/ |
| D | imx-weim.txt | 31 Purpose Register controller that contains WEIM CS GPR
|
| /linux-4.1.27/Documentation/virtual/kvm/devices/ |
| D | s390_flic.txt | 53 Register an I/O adapter interrupt source. Takes a kvm_s390_io_adapter
|
| /linux-4.1.27/arch/xtensa/lib/ |
| D | strnlen_user.S | 40 # Register use:
|
| D | strncpy_user.S | 41 # Register use
|
| /linux-4.1.27/Documentation/devicetree/bindings/i2c/ |
| D | nvidia,tegra20-i2c.txt | 11 controller. This only support master mode of I2C communication. Register
|
| /linux-4.1.27/Documentation/driver-model/ |
| D | porting.txt | 45 - Register the bus type.
163 - Register the device.
249 - Register the driver.
|
| /linux-4.1.27/arch/arc/ |
| D | Kconfig | 348 bool "Dedicate Register r25 for current_task pointer"
351 This reserved Register R25 to point to Current Task in
|
| /linux-4.1.27/arch/parisc/kernel/ |
| D | perf_asm.S | 110 ;* Register usage:
1366 ;* Register usage:
|
| /linux-4.1.27/Documentation/isdn/ |
| D | README.audio | 19 Register 18 is set to 4.
|
| /linux-4.1.27/Documentation/arm/pxa/ |
| D | mfp.txt | 275 Register Settings
278 Register settings on PXA3xx for a pin configuration is actually very
|
| /linux-4.1.27/tools/perf/Documentation/ |
| D | perf-list.txt | 67 Figure 13-7 Performance Event-Select Register (PerfEvtSeln)).
|
| /linux-4.1.27/Documentation/PCI/ |
| D | pcieaer-howto.txt | 117 Status Register accordingly. If AER error reporting is enabled in Root
118 Error Command Register, the Root Port generates an interrupt if an
|
| D | pci.txt | 50 Register IRQ handler (request_irq())
246 Register IRQ handler (request_irq())
361 3.6 Register IRQ handler
|
| /linux-4.1.27/Documentation/devicetree/bindings/phy/ |
| D | samsung-phy.txt | 133 - reg : Register offset and length of USB DRD PHY register set;
|
| /linux-4.1.27/Documentation/arm/ |
| D | tcm.txt | 20 at http://infocenter.arm.com, search for "TCM Status Register"
|
| /linux-4.1.27/Documentation/leds/ |
| D | leds-lp55xx.txt | 10 Register access via the I2C
|
| /linux-4.1.27/drivers/scsi/aic7xxx/ |
| D | aic7xxx.reg | 82 * SCSI Transfer Control 0 Register (pp. 3-13).
98 * SCSI Transfer Control 1 Register (pp. 3-14,15).
115 * SCSI Control Signal Read Register (p. 3-15).
144 * SCSI Control Signal Write Register (p. 3-16).
|
| D | aic79xx.reg | 50 /* Register window Modes */
227 * Error Register
258 * Host Control Register
3490 * Source Index Register
3507 * Destination Index Register
|
| /linux-4.1.27/Documentation/virtual/kvm/ |
| D | timekeeping.txt | 218 0Ah byte Register A
237 0Bh byte Register B
246 OCh byte Register C (read only)
252 ODh byte Register D (read only)
|
| D | ppc-pv.txt | 37 Register IN OUT
|
| D | api.txt | 1839 Arch | Register | Width (bits)
|
| /linux-4.1.27/arch/m32r/mm/ |
| D | mmu.S | 322 ;; Set MMU Register
|
| /linux-4.1.27/Documentation/arm/nwfpe/ |
| D | README.FPE | 40 Floating Point Coprocessor Register Transfer Instructions (CPRT)
|
| /linux-4.1.27/Documentation/watchdog/ |
| D | convert_drivers_to_kernel_api.txt | 189 Register the watchdog device
|
| /linux-4.1.27/arch/blackfin/ |
| D | Kconfig | 697 prompt "Blackfin Exception Scratch Register"
1208 hex "EBIU Bank Select Control Register"
1213 hex "Flash Memory Mode Control Register"
1218 hex "Flash Memory Bank Control Register"
|
| /linux-4.1.27/Documentation/networking/caif/ |
| D | spi_porting.txt | 192 /* Register platform device. */
|
| /linux-4.1.27/Documentation/spi/ |
| D | pxa2xx | 31 corresponding SSP peripheral block in the "Clock Enable Register (CKEN"). See
|
| /linux-4.1.27/Documentation/power/regulator/ |
| D | consumer.txt | 185 7. Regulator Direct Register Access
|
| /linux-4.1.27/Documentation/powerpc/ |
| D | transactional_memory.txt | 57 transaction, the transaction will be aborted by the CPU. Register and memory
|
| D | cxl.txt | 199 Authority Mask Register (AMR), same as the powerpc
|
| /linux-4.1.27/drivers/mtd/devices/ |
| D | Kconfig | 72 bool "DataFlash OTP support (Security Register)"
|
| /linux-4.1.27/Documentation/arm/Samsung-S3C24XX/ |
| D | Overview.txt | 48 Register, kernel and platform data definitions are held in the
|
| /linux-4.1.27/arch/arm/mach-shmobile/include/mach/ |
| D | head-kzm9g.txt | 16 LIST "Register definitions:"
|
| /linux-4.1.27/drivers/mmc/host/ |
| D | vub300.c | 546 u32 Register = ((0x03 & register_access->command_byte[0]) << 15) in add_offloaded_reg() local
554 vub300->sdio_register[i].sdio_reg == Register) { in add_offloaded_reg()
|
| /linux-4.1.27/Documentation/serial/ |
| D | driver | 398 Register a uart driver with the core driver. We in turn register
|
| /linux-4.1.27/Documentation/s390/ |
| D | Debugging390.txt | 22 Register Set
26 Register Usage & Stackframes on Linux for s/390 & z/Architecture
42 Register Set
396 Register Usage & Stackframes on Linux for s/390 & z/Architecture
507 s/390 & z/Architecture Register usage
|
| /linux-4.1.27/Documentation/ia64/ |
| D | err_inject.txt | 704 case 3: // Register file
|
| /linux-4.1.27/drivers/char/ |
| D | Kconfig | 174 tristate "IBM POWER Barrier Synchronization Register support"
|
| /linux-4.1.27/drivers/mfd/ |
| D | Kconfig | 947 bool "System Controller Register R/W Based on Regmap"
|
| /linux-4.1.27/arch/arm/ |
| D | Kconfig.debug | 1518 int "Register offset shift for the 8250 debug UART"
|
| /linux-4.1.27/drivers/rtc/ |
| D | Kconfig | 887 to lost interrupts, as reading Control Register C will clear
|
| /linux-4.1.27/arch/x86/ |
| D | Kconfig | 1531 prompt "MTRR (Memory Type Range Register) support" if EXPERT
|