/linux-4.1.27/net/dsa/ |
D | Kconfig | 8 tristate "Distributed Switch Architecture" 13 by the Distributed Switch Architecture. 18 bool "Distributed Switch Architecture HWMON support" 23 by the Distributed Switch Architecture.
|
/linux-4.1.27/Documentation/sound/alsa/ |
D | ControlNames.txt | 13 Switch (on/off switch) 75 [Analogue|Digital] Capture Switch (aka input gain switch) 77 [Analogue|Digital] Playback Switch (aka output gain switch) 79 Tone Control - Switch 82 3D Control - Switch 99 IEC958 [...] [Playback|Capture] Switch /* turn on/off the IEC958 interface */
|
D | SB-Live-mixer.txt | 83 name='Wave Capture Switch',index=0 97 name='Synth Capture Switch',index=0 112 name='Surround Capture Switch',index=0 213 name='Tone Control - Switch',index=0 230 name='IEC958 Optical Raw Playback Switch',index=0 240 name='Headphone Center Playback Switch',index=1 246 name='Headphone LFE Playback Switch',index=1
|
D | CMIPCI.txt | 127 To enable SPDIF output, you need to turn on "IEC958 Output Switch" 138 off. (Also don't forget to turn on "IEC958 Output Switch", too.) 169 Note: When "PCM Playback Switch" is on, you'll hear the digital output 180 On the raw digital mode, the "PCM Playback Switch" is automatically
|
D | OSS-Emulation.txt | 206 from "PCM Playback Volume" and "PCM Playback Switch" controls for the 208 Switch" for the capture directory (if exists). When the PCM volume of 244 [Volume|Switch]" will be checked in addition. 269 example, both "Wave Playback Volume" and "Wave Playback Switch" will
|
D | Audigy-mixer.txt | 189 name='Tone Control - Switch',index=0 211 name='IEC958 Optical Raw Playback Switch',index=0
|
D | HD-Audio.txt | 259 Switch" have to be set properly in addition to the right "Capture
|
/linux-4.1.27/drivers/w1/slaves/ |
D | Kconfig | 20 tristate "8-Channel Addressable Switch (IO Expander) 0x29 family support (DS2408)" 23 DS2408 8-Channel Addressable Switch device support 36 tristate "Dual Channel Addressable Switch 0x3a family support (DS2413)" 39 DS2413 Dual Channel Addressable Switch device support 42 tristate "Dual Channel Addressable Switch 0x12 family support (DS2406)" 46 DS2406 Dual Channel Addressable Switch. EPROM read/write
|
/linux-4.1.27/Documentation/devicetree/ |
D | todo.txt | 4 - Switch from custom lists to (h)list_head for nodes and properties structure 7 - Switch to RCU for tree updates and get rid of global spinlock
|
/linux-4.1.27/net/switchdev/ |
D | Kconfig | 2 # Configuration for Switch device support 6 bool "Switch (and switch-ish) device support (EXPERIMENTAL)"
|
/linux-4.1.27/Documentation/devicetree/bindings/extcon/ |
D | extcon-rt8973a.txt | 2 * Richtek RT8973A - Micro USB Switch device 4 The Richtek RT8973A is Micro USB Switch with OVP and I2C interface. The RT8973A
|
/linux-4.1.27/drivers/net/ethernet/ti/ |
D | Kconfig | 53 bool "TI CPSW Switch Phy sel Support" 65 tristate "TI CPSW Switch Support" 74 This driver supports TI's CPSW Ethernet Switch. 85 the CPSW Ethernet Switch. The unit can time stamp PTP UDP/IPv4
|
/linux-4.1.27/Documentation/sound/alsa/soc/ |
D | dapm.txt | 58 o Switch - An analog switch 127 SOC_DAPM_SINGLE("Line Bypass Switch", WM8731_APANA, 3, 1, 0), 128 SOC_DAPM_SINGLE("Mic Sidetone Switch", WM8731_APANA, 5, 1, 0), 129 SOC_DAPM_SINGLE("HiFi Playback Switch", WM8731_APANA, 4, 1, 0), 213 {"Output Mixer", "Line Bypass Switch", "Line Input"}, 214 {"Output Mixer", "HiFi Playback Switch", "DAC"}, 215 {"Output Mixer", "Mic Sidetone Switch", "Mic Bias"}, 227 "Output Mixer" is connected to the "DAC" via the "HiFi Playback Switch".
|
/linux-4.1.27/Documentation/networking/ |
D | arcnet-hardware.txt | 624 Switch | Hex I/O 646 Switch | Hex RAM | Hex ROM 823 Switch 1 serves as the least significant bit (LSB). 828 Switch | Value 841 Switch | Hex | Decimal 864 Switch | Hex I/O 909 Switch | IRQ 1052 (DIP-Switch downwards means "0") 1175 Switch No. 1203 IO Switch No. [all …]
|
D | switchdev.txt | 1 Switch (and switch-ish) device drivers HOWTO
|
D | bonding.txt | 59 5. Switch Configuration 78 11.1 High Availability in a Single Switch Topology 79 11.2 High Availability in a Multiple Switch Topology 80 11.2.1 HA Bonding Mode Selection for Multiple Switch Topology 81 11.2.2 HA Link Monitoring for Multiple Switch Topology 84 12.1 Maximum Throughput in a Single Switch Topology 85 12.1.1 MT Bonding Mode Selection for Single Switch Topology 86 12.1.2 MT Link Monitoring for Single Switch Topology 87 12.2 Maximum Throughput in a Multiple Switch Topology 88 12.2.1 MT Bonding Mode Selection for Multiple Switch Topology [all …]
|
D | dm9000.txt | 118 Switch to using the simpler PHY polling method which does not
|
D | README.ipw2100 | 20 5. Radio Kill Switch 175 5. Radio Kill Switch
|
D | ixgb.txt | 350 Switch Port
|
/linux-4.1.27/arch/s390/kernel/ |
D | head_kdump.S | 24 sigp %r1,%r0,SIGP_SET_ARCHITECTURE # Switch to esame mode 25 sam64 # Switch to 64 bit addressing
|
D | base.S | 103 sigp %r1,%r0,SIGP_SET_ARCHITECTURE # Switch to ESAME mode 104 sam64 # Switch to 64 bit addressing mode
|
/linux-4.1.27/Documentation/devicetree/bindings/sound/ |
D | nvidia,tegra20-das.txt | 1 NVIDIA Tegra 20 DAS (Digital Audio Switch) controller
|
D | ts3a227e.txt | 2 Autonomous Audio Accessory Detection and Configuration Switch
|
/linux-4.1.27/arch/metag/kernel/ |
D | process.c | 306 to.Switch.pCtx = next->thread.kernel_context; in __switch_to() 307 to.Switch.pPara = prev; in __switch_to() 336 return (struct task_struct *) from.Switch.pPara; in __switch_to()
|
D | traps.c | 884 struct task_struct *prev = arg.Switch.pPara; in ret_from_fork()
|
/linux-4.1.27/Documentation/power/regulator/ |
D | overview.txt | 53 Regulator -+-> Switch-1 -+-> Switch-2 --> [Consumer A] 61 Domain 1: Switch-1, Consumers D & E. 62 Domain 2: Switch-2, Consumers B & C.
|
/linux-4.1.27/arch/arc/kernel/ |
D | ctx_sw_asm.S | 19 ;################### Low Level Context Switch ##########################
|
/linux-4.1.27/sound/usb/usx2y/ |
D | usbus428ctldefs.h | 62 unsigned char Switch; member
|
/linux-4.1.27/Documentation/devicetree/bindings/net/ |
D | cpsw.txt | 1 TI SoC Ethernet Switch Controller Device Tree Bindings 26 - dual_emac : Specifies Switch to act as Dual EMAC
|
D | keystone-netcp.txt | 29 | |-> GBE/XGBE Switch 96 -- slave-port: Switch port number, 0 based numbering.
|
/linux-4.1.27/arch/arm/boot/dts/ |
D | kirkwood-lsxl.dtsi | 116 label = "Power-on Switch"; 122 label = "Power-auto Switch";
|
D | bcm47081-buffalo-wzr-600dhp2.dts | 110 /* Switch device mode? */
|
D | bcm4708-buffalo-wzr-1750dhp.dts | 117 /* Switch: AP mode */
|
D | kirkwood-topkick.dts | 23 * Switch positions
|
D | orion5x-lacie-ethernet-disk-mini-v2.dts | 49 label = "Power-on Switch";
|
/linux-4.1.27/arch/c6x/kernel/ |
D | switch_to.S | 45 ;; Switch to next SP
|
/linux-4.1.27/Documentation/rapidio/ |
D | sysfs.txt | 63 4. RapidIO Switch Device Attributes 72 4.1 Common Switch Attributes 85 4.2 Device-specific Switch Attributes
|
D | rapidio.txt | 55 2.3 Switch 312 4.6 Using Loadable RapidIO Switch Drivers
|
/linux-4.1.27/Documentation/PCI/ |
D | PCIEBUS-HOWTO.txt | 16 are two types of PCI Express Port: the Root Port and the Switch 18 Root Complex and the Switch Port connects PCI Express links to 19 internal logical PCI buses. The Switch Port, which has its secondary 23 PCI Express link from the PCI Express Switch.
|
/linux-4.1.27/drivers/net/dsa/ |
D | Kconfig | 1 menu "Distributed Switch Architecture drivers"
|
/linux-4.1.27/drivers/pci/pcie/ |
D | Kconfig | 11 on PCI Express Ports (Root or Switch).
|
/linux-4.1.27/drivers/rapidio/ |
D | Kconfig | 70 menu "RapidIO Switch drivers"
|
/linux-4.1.27/Documentation/devicetree/bindings/net/dsa/ |
D | dsa.txt | 1 Marvell Distributed Switch Architecture Device Tree Bindings
|
/linux-4.1.27/arch/powerpc/boot/dts/ |
D | p1020mbg-pc.dtsi | 64 /* 1M for Vitesse 7385 Switch firmware */
|
D | p2020rdb.dts | 50 /* 256KB for Vitesse 7385 Switch firmware */
|
D | p1024rdb.dtsi | 46 /* 256KB for Vitesse 7385 Switch firmware */
|
D | p2020rdb-pc.dtsi | 46 /* 256KB for Vitesse 7385 Switch firmware */
|
D | p1021rdb-pc.dtsi | 46 /* 256KB for Vitesse 7385 Switch firmware */
|
D | p1020rdb.dtsi | 46 /* 256KB for Vitesse 7385 Switch firmware */
|
D | p1020rdb-pd.dts | 81 /* 1M for Vitesse 7385 Switch firmware */
|
D | p1020rdb-pc.dtsi | 46 /* 256KB for Vitesse 7385 Switch firmware */
|
D | p1025twr.dtsi | 53 /* 256KB for Vitesse 7385 Switch firmware */
|
D | p1025rdb.dtsi | 46 /* 256KB for Vitesse 7385 Switch firmware */
|
/linux-4.1.27/arch/sh/kernel/cpu/sh5/ |
D | switchto.S | 127 ! Switch stacks
|
/linux-4.1.27/Documentation/extcon/ |
D | porting-android-switch-class | 2 Staging/Android Switch Class Porting Guide
|
/linux-4.1.27/arch/arm/kvm/ |
D | interrupts.S | 486 @ Switch VFP/NEON hardware state to the guest's
|
/linux-4.1.27/Documentation/vm/ |
D | slub.txt | 45 O Switch debugging off for caches that would have 47 - Switch all debugging off (useful if the kernel is
|
/linux-4.1.27/arch/sh/kernel/cpu/sh3/ |
D | entry.S | 330 ! Switch to kernel stack if needed
|
/linux-4.1.27/drivers/net/ethernet/intel/ |
D | Kconfig | 326 tristate "Intel(R) FM10000 Ethernet Switch Host Interface Support" 331 This driver supports Intel(R) FM10000 Ethernet Switch Host
|
/linux-4.1.27/Documentation/devicetree/bindings/i2c/ |
D | trivial-devices.txt | 83 plx,pex8648 48-Lane, 12-Port PCI Express Gen 2 (5.0 GT/s) Switch
|
/linux-4.1.27/Documentation/devicetree/bindings/mfd/ |
D | qcom-rpm.txt | 162 === Switch-mode Power Supply regulator custom properties
|
/linux-4.1.27/arch/metag/include/asm/ |
D | tbx.h | 641 } Switch; member
|
/linux-4.1.27/arch/arm/mach-ixp4xx/ |
D | Kconfig | 172 npe0 is connected to a Kendin KS8995M Switch (4 ports)
|
/linux-4.1.27/arch/cris/arch-v32/kernel/ |
D | entry.S | 359 move.d [$acr], $sp ; Switch to new stackframe.
|
/linux-4.1.27/drivers/message/fusion/lsi/ |
D | mpi_ioc.h | 424 U8 Switch; /* 00h */ member
|
/linux-4.1.27/drivers/input/keyboard/ |
D | Kconfig | 369 tristate "Maxim MAX7359 Key Switch Controller" 373 Switch Controller chip. This providers microprocessors with
|
/linux-4.1.27/Documentation/ide/ |
D | ChangeLog.ide-cd.1994-2004 | 89 * Switch to using MSF addressing for audio commands.
|
/linux-4.1.27/Documentation/isdn/ |
D | README | 443 Switch off secure operation (default). 446 Switch the hang-up-timer for incoming calls on or off.
|
/linux-4.1.27/Documentation/arm/OMAP/ |
D | DSS | 241 Example: Switch from LCD to DVI
|
/linux-4.1.27/arch/blackfin/ |
D | Kconfig | 888 bool "Locate CPLB Switch Tables L1 Data Memory" 892 If enabled, the CPLB Switch Tables are linked
|
/linux-4.1.27/drivers/md/ |
D | Kconfig | 449 tristate "Switch target support (EXPERIMENTAL)"
|
/linux-4.1.27/drivers/misc/ |
D | Kconfig | 481 tristate "FSA9480 USB Switch"
|
/linux-4.1.27/Documentation/filesystems/ |
D | porting | 398 ->get_sb() is gone. Switch to use of ->mount(). Typically it's just
|
D | vfs.txt | 17 The Virtual File System (also known as the Virtual Filesystem Switch)
|
/linux-4.1.27/arch/alpha/ |
D | Kconfig | 143 slices (Data Switch, DSW) - 208-pin PQFP and 1 control (Control, I/O
|
/linux-4.1.27/sound/pci/ |
D | Kconfig | 143 Note: Switch between analog and digital input does not always work.
|
/linux-4.1.27/drivers/platform/x86/ |
D | Kconfig | 462 IBM, Zoom, Switch Display (fn+F7), ThinkLight, Volume up/down/mute,
|
/linux-4.1.27/drivers/scsi/aic7xxx/ |
D | aic79xx.seq | 1499 * Switch to the other FIFO. Non-RTI chips 1879 * Switch to the active FIFO after clearing the snapshot
|
/linux-4.1.27/scripts/kconfig/ |
D | zconf.lex.c_shipped | 1765 /** Switch to a different input buffer.
|
/linux-4.1.27/scripts/genksyms/ |
D | lex.lex.c_shipped | 1366 /** Switch to a different input buffer.
|
/linux-4.1.27/scripts/dtc/ |
D | dtc-lexer.lex.c_shipped | 1633 /** Switch to a different input buffer.
|
/linux-4.1.27/Documentation/scsi/ |
D | ChangeLog.1992-1997 | 1725 * seagate.c: Switch around DATA/CONTROL lines.
|
D | ChangeLog.lpfc | 1263 * Switch from using internal bus/id/lun to similar data from
|
/linux-4.1.27/Documentation/laptops/ |
D | thinkpad-acpi.txt | 520 0x7000 Radio Switch may have changed state
|
/linux-4.1.27/drivers/message/fusion/ |
D | mptbase.c | 6279 evn.Switch = EvSwitch; in SendEventNotification()
|