| /linux-4.1.27/drivers/input/joystick/ |
| D | adi.c | 108 struct adi { struct
129 struct adi adi[2]; argument
140 struct adi *adi = port->adi; in adi_read_packet() local
147 adi[i].ret = -1; in adi_read_packet()
163 if ((w & 0x30) < 0x30 && adi[i].ret < ADI_MAX_LENGTH && t[i] > 0) { in adi_read_packet()
164 adi[i].data[++adi[i].ret] = w; in adi_read_packet()
184 struct adi *adi = port->adi; in adi_move_bits() local
186 adi[0].idx = adi[1].idx = 0; in adi_move_bits()
188 if (adi[0].ret <= 0 || adi[1].ret <= 0) return; in adi_move_bits()
189 if (adi[0].data[0] & 0x20 || ~adi[1].data[0] & 0x20) return; in adi_move_bits()
[all …]
|
| D | Makefile | 8 obj-$(CONFIG_JOYSTICK_ADI) += adi.o
|
| D | Kconfig | 52 module will be called adi.
|
| /linux-4.1.27/Documentation/devicetree/bindings/iio/frequency/ |
| D | adf4350.txt | 5 * "adi,adf4350": When using the ADF4350 device
6 * "adi,adf4351": When using the ADF4351 device
15 - adi,channel-spacing: Channel spacing in Hz (influences MODULUS).
16 - adi,power-up-frequency: If set in Hz the PLL tunes to
18 - adi,reference-div-factor: If set the driver skips dynamic calculation
20 - adi,reference-doubler-enable: Enables reference doubler.
21 - adi,reference-div2-enable: Enables reference divider.
22 - adi,phase-detector-polarity-positive-enable: Enables positive phase
24 - adi,lock-detect-precision-6ns-enable: Enables 6ns lock detect precision.
26 - adi,lock-detect-function-integer-n-enable: Enables lock detect
[all …]
|
| /linux-4.1.27/Documentation/devicetree/bindings/video/ |
| D | adi,adv7511.txt | 10 - compatible: Should be one of "adi,adv7511", "adi,adv7511w" or "adi,adv7513"
19 - adi,input-depth: Number of bits per color component at the input (8, 10 or
21 - adi,input-colorspace: The input color space, one of "rgb", "yuv422" or
23 - adi,input-clock: The input clock type, one of "1x" (one clock cycle per
30 - adi,input-style: The input components arrangement variant (1, 2 or 3), as
32 - adi,input-justification: The input bit justification ("left", "evenly",
40 - adi,clock-delay: Video data clock delay relative to the pixel clock, in ps
42 - adi,embedded-sync: The input uses synchronization signals embedded in the
59 compatible = "adi,adv7511w";
64 adi,input-depth = <8>;
[all …]
|
| D | adi,adv7123.txt | 9 - compatible: Should be "adi,adv7123"
28 compatible = "adi,adv7123";
|
| /linux-4.1.27/Documentation/devicetree/bindings/media/i2c/ |
| D | adv7343.txt | 10 - compatible: Must be "adi,adv7343"
13 - adi,power-mode-sleep-mode: on enable the current consumption is reduced to
16 - adi,power-mode-pll-ctrl: PLL and oversampling control. This control allows
33 compatible = "adi,adv7343";
38 adi,power-mode-sleep-mode;
39 adi,power-mode-pll-ctrl;
41 adi,dac-enable = <1 1 1 0 0 1>;
43 adi,sd-dac-enable = <1 0>;
|
| D | adv7604.txt | 12 - "adi,adv7611" for the ADV7611
52 compatible = "adi,adv7611";
|
| /linux-4.1.27/sound/soc/adi/ |
| D | Makefile | 1 snd-soc-adi-axi-i2s-objs := axi-i2s.o
2 snd-soc-adi-axi-spdif-objs := axi-spdif.o
4 obj-$(CONFIG_SND_SOC_ADI_AXI_I2S) += snd-soc-adi-axi-i2s.o
5 obj-$(CONFIG_SND_SOC_ADI_AXI_SPDIF) += snd-soc-adi-axi-spdif.o
|
| /linux-4.1.27/Documentation/devicetree/bindings/sound/ |
| D | adi,adau1701.txt | 5 - compatible: Should contain "adi,adau1701"
14 - adi,pll-mode-gpios: An array of two GPIO specs to describe the GPIOs
19 - adi,pin-config: An array of 12 numerical values selecting one of the
28 compatible = "adi,adau1701";
31 adi,pll-mode-gpios = <&gpio 24 0 &gpio 25 0>;
32 adi,pin-config = /bits/ 8 <0x4 0x7 0x5 0x5 0x4 0x4
|
| D | adi,ssm2602.txt | 9 - compatible : One of "adi,ssm2602", "adi,ssm2603" or "adi,ssm2604"
17 compatible = "adi,ssm2602";
|
| D | ssm4567.txt | 6 - compatible : Must be "adi,ssm4567"
13 compatible = "adi,ssm4567";
|
| D | ssm2518.txt | 6 - compatible : Must be "adi,ssm2518"
17 compatible = "adi,ssm2518";
|
| D | adi,axi-i2s.txt | 4 - compatible : Must be "adi,axi-i2s-1.00.a"
25 compatible = "adi,axi-i2s-1.00.a";
|
| D | adi,axi-spdif-tx.txt | 4 - compatible : Must be "adi,axi-spdif-tx-1.00.a"
24 compatible = "adi,axi-spdif-tx-1.00.a";
|
| /linux-4.1.27/Documentation/devicetree/bindings/clock/ |
| D | axi-clkgen.txt | 8 - compatible : shall be "adi,axi-clkgen-1.00.a" or "adi,axi-clkgen-2.00.a".
18 compatible = "adi,axi-clkgen";
|
| /linux-4.1.27/Documentation/devicetree/bindings/iio/dac/ |
| D | ad7303.txt | 4 - compatible: Must be "adi,ad7303"
17 compatible = "adi,ad7303";
21 adi,use-external-reference;
|
| /linux-4.1.27/Documentation/devicetree/bindings/hwmon/ |
| D | lm90.txt | 5 "adi,adm1032"
6 "adi,adt7461"
7 "adi,adt7461a"
|
| /linux-4.1.27/Documentation/devicetree/bindings/i2c/ |
| D | trivial-devices.txt | 15 adi,adt7461 +/-1C TDM Extended Temp Range I.C
17 adi,adt7473 +/-1C TDM Extended Temp Range I.C
18 adi,adt7475 +/-1C TDM Extended Temp Range I.C
19 adi,adt7476 +/-1C TDM Extended Temp Range I.C
20 adi,adt7490 +/-1C TDM Extended Temp Range I.C
21 adi,adxl345 Three-Axis Digital Accelerometer
22 adi,adxl346 Three-Axis Digital Accelerometer
23 adi,adxl34x Three-Axis Digital Accelerometer
|
| /linux-4.1.27/arch/arm/boot/dts/ |
| D | r8a7790-lager.dts | 195 compatible = "adi,adv7123";
535 compatible = "adi,adv7180";
548 compatible = "adi,adv7511w";
553 adi,input-depth = <8>;
554 adi,input-colorspace = "rgb";
555 adi,input-clock = "1x";
556 adi,input-style = <1>;
557 adi,input-justification = "evenly";
|
| D | r8a7791-koelsch.dts | 532 compatible = "adi,adv7180";
545 compatible = "adi,adv7511w";
550 adi,input-depth = <8>;
551 adi,input-colorspace = "rgb";
552 adi,input-clock = "1x";
553 adi,input-style = <1>;
554 adi,input-justification = "evenly";
|
| D | kirkwood-nsa310.dts | 84 compatible = "adi,adt7476";
|
| D | kirkwood-blackarmor-nas220.dts | 150 compatible = "adi,adt7476";
|
| D | r8a7779-marzen.dts | 74 compatible = "adi,adv7123";
|
| D | r8a7791-henninger.dts | 207 compatible = "adi,adv7180";
|
| D | ls1021a-qds.dts | 132 compatible = "adi,adt7461a";
|
| D | sh73a0-kzm9g.dts | 208 compatible = "adi,adxl34x";
|
| D | armada-xp-lenovo-ix4-300d.dts | 129 compatible = "adi,adt7473";
|
| D | tegra20-paz00.dts | 435 compatible = "adi,adt7461";
|
| D | tegra20-harmony.dts | 433 compatible = "adi,adt7461";
|
| /linux-4.1.27/sound/soc/ |
| D | Makefile | 15 obj-$(CONFIG_SND_SOC) += adi/
|
| D | Kconfig | 34 source "sound/soc/adi/Kconfig"
|
| /linux-4.1.27/drivers/net/ethernet/ |
| D | Makefile | 19 obj-$(CONFIG_NET_BFIN) += adi/
|
| D | Kconfig | 33 source "drivers/net/ethernet/adi/Kconfig"
|
| /linux-4.1.27/Documentation/devicetree/bindings/media/ |
| D | rcar_vin.txt | 55 compatible = "adi,adv7180";
|
| /linux-4.1.27/arch/powerpc/boot/dts/ |
| D | mpc5121ads.dts | 92 compatible = "adi,ad7414";
|
| D | t104xrdb.dtsi | 102 compatible = "adi,adt7461";
|
| D | mvme2500.dts | 37 compatible = "adi,adt7461";
|
| D | b4qds.dtsi | 189 compatible = "adi,adt7461";
|
| D | p1022rdk.dts | 64 compatible = "adi,adt7461";
|
| D | t208xrdb.dtsi | 112 compatible = "adi,adt7481";
|
| D | mpc8536ds.dtsi | 136 compatible = "adi,adt7461";
|
| D | p4080ds.dts | 115 compatible = "adi,adt7461";
|
| D | ge_imp3a.dts | 140 compatible = "adi,adt7461";
|
| D | p1022ds.dtsi | 154 compatible = "adi,adt7461";
|
| D | c293pcie.dts | 161 compatible = "adi,adt7461";
|
| D | t208xqds.dtsi | 194 compatible = "adi,adt7461";
|
| D | p5040ds.dts | 134 compatible = "adi,adt7461";
|
| D | p2041rdb.dts | 113 compatible = "adi,adt7461";
|
| D | warp.dts | 233 compatible = "adi,ad7414";
|
| D | p5020ds.dts | 137 compatible = "adi,adt7461";
|
| D | p3041ds.dts | 137 compatible = "adi,adt7461";
|
| D | gef_sbc610.dts | 201 compatible = "adi,adt7461";
|
| D | gef_ppc9a.dts | 203 compatible = "adi,adt7461";
|
| D | gef_sbc310.dts | 216 compatible = "adi,adt7461";
|
| D | sequoia.dts | 291 compatible = "adi,ad7414";
|
| D | xpedite5370.dts | 217 compatible = "adi,adt7461";
|
| D | xpedite5301.dts | 219 compatible = "adi,adt7461";
|
| D | xpedite5330.dts | 255 compatible = "adi,adt7461";
|
| D | xcalibur1501.dts | 226 compatible = "adi,adt7461";
|
| /linux-4.1.27/drivers/spi/ |
| D | Makefile | 22 obj-$(CONFIG_SPI_ADI_V3) += spi-adi-v3.o
|
| /linux-4.1.27/arch/ia64/hp/common/ |
| D | sba_iommu.c | 2030 struct acpi_device_info *adi; in acpi_sba_ioc_add() local
2037 status = acpi_get_object_info(handle, &adi); in acpi_sba_ioc_add()
2045 if (strncmp("HWP0001", adi->hardware_id.string, 7) == 0) { in acpi_sba_ioc_add()
2051 kfree(adi); in acpi_sba_ioc_add()
|
| /linux-4.1.27/Documentation/devicetree/bindings/ |
| D | vendor-prefixes.txt | 12 adi Analog Devices, Inc.
|
| /linux-4.1.27/Documentation/input/ |
| D | joystick.txt | 268 Logitech ADI protocol is supported by the adi.c module. It should support
|
| /linux-4.1.27/ |
| D | MAINTAINERS | 714 L: adi-buildroot-devel@lists.sourceforge.net (moderated for non-subscribers)
1996 L: adi-buildroot-devel@lists.sourceforge.net (moderated for non-subscribers)
1997 T: git git://git.code.sf.net/p/adi-linux/code
2003 L: adi-buildroot-devel@lists.sourceforge.net (moderated for non-subscribers)
2006 F: drivers/net/ethernet/adi/
2009 L: adi-buildroot-devel@lists.sourceforge.net (moderated for non-subscribers)
2016 L: adi-buildroot-devel@lists.sourceforge.net (moderated for non-subscribers)
2023 L: adi-buildroot-devel@lists.sourceforge.net (moderated for non-subscribers)
2029 L: adi-buildroot-devel@lists.sourceforge.net (moderated for non-subscribers)
2036 L: adi-buildroot-devel@lists.sourceforge.net (moderated for non-subscribers)
[all …]
|