| /linux-4.1.27/Documentation/devicetree/bindings/arm/ |
| D | spear.txt | 4 Boards with the ST SPEAr600 SoC shall have the following properties:
8 Boards with the ST SPEAr300 SoC shall have the following properties:
12 Boards with the ST SPEAr310 SoC shall have the following properties:
16 Boards with the ST SPEAr320 SoC shall have the following properties:
20 Boards with the ST SPEAr1310 SoC shall have the following properties:
24 Boards with the ST SPEAr1340 SoC shall have the following properties:
|
| D | sti.txt | 4 Boards with the ST STiH415 SoC shall have the following properties:
8 Boards with the ST STiH416 SoC shall have the following properties:
12 Boards with the ST STiH407 SoC shall have the following properties:
16 Boards with the ST STiH410 SoC shall have the following properties:
20 Boards with the ST STiH418 SoC shall have the following properties:
|
| D | vt8500.txt | 4 Boards with the VIA VT8500 SoC shall have the following properties:
8 Boards with the Wondermedia WM8505 SoC shall have the following properties:
12 Boards with the Wondermedia WM8650 SoC shall have the following properties:
16 Boards with the Wondermedia WM8750 SoC shall have the following properties:
20 Boards with the Wondermedia WM8850 SoC shall have the following properties:
|
| D | armada-370-xp.txt | 5 shall have the following property:
12 following property:
19 following property:
|
| D | armada-38x.txt | 5 following property:
12 following property before the previous one:
19 following property before the previous one:
|
| D | calxeda.txt | 5 following properties.
11 Boards with Calxeda Cortex-A15 based ECX-2000 SOC shall have the following
|
| D | amlogic.txt | 4 Boards with the Amlogic Meson6 SoC shall have the following properties:
8 Boards with the Amlogic Meson8 SoC shall have the following properties:
|
| D | armada-39x.txt | 5 following property:
12 following property before the previous one:
|
| D | tegra.txt | 8 following compatible values:
16 Each device tree must specify which one or more of the following
|
| /linux-4.1.27/Documentation/devicetree/bindings/clock/ |
| D | mvebu-core-clock.txt | 7 The following is a list of provided IDs and clock names on Armada 370/XP:
14 The following is a list of provided IDs and clock names on Armada 375:
20 The following is a list of provided IDs and clock names on Armada 380/385:
26 The following is a list of provided IDs and clock names on Armada 39x:
34 The following is a list of provided IDs and clock names on Kirkwood and Dove:
40 The following is a list of provided IDs and clock names on Orion5x:
46 - compatible : shall be one of the following:
|
| D | mvebu-gated-clock.txt | 10 The following is a list of provided IDs for Armada 370:
26 The following is a list of provided IDs for Armada 375:
53 The following is a list of provided IDs for Armada 380/385:
80 The following is a list of provided IDs for Armada 39x:
92 The following is a list of provided IDs for Armada XP:
119 The following is a list of provided IDs for Dove:
142 The following is a list of provided IDs for Kirkwood:
163 - compatible : shall be one of the following:
|
| /linux-4.1.27/Documentation/x86/x86_64/ |
| D | uefi.txt | 19 - Build the kernel with the following configuration.
22 If EFI runtime services are expected, the following configuration should
27 - Copy the following to the VFAT partition:
34 - If some or all EFI runtime services don't work, you can try following
41 physical RAM by using the following kernel command line parameter.
|
| /linux-4.1.27/Documentation/devicetree/bindings/gpu/ |
| D | nvidia,tegra20-host1x.txt | 16 - reset-names: Must include the following entries:
20 of the following host1x client modules:
32 - reset-names: Must include the following entries:
45 - reset-names: Must include the following entries:
58 - reset-names: Must include the following entries:
71 - reset-names: Must include the following entries:
84 - reset-names: Must include the following entries:
94 - clock-names: Must include the following entries:
101 - reset-names: Must include the following entries:
113 - clock-names: Must include the following entries:
[all …]
|
| D | nvidia,gk20a.txt | 13 - interrupt-names: Must include the following entries:
19 - clock-names: Must include the following entries:
24 - reset-names: Must include the following entries:
|
| /linux-4.1.27/Documentation/devicetree/bindings/input/ |
| D | e3x0-button.txt | 8 - compatible: should be one of the following
12 - interrupts: should be one of the following
14 - interrupt-names: should be one of the following
|
| D | twl4030-keypad.txt | 9 This binding is based on the matrix-keymap binding with the following
15 - compatible: should be one of the following
18 - interrupt: should be one of the following
|
| D | twl4030-pwrbutton.txt | 9 - compatible: should be one of the following
11 - interrupts: should be one of the following
|
| D | omap-keypad.txt | 9 This binding is based on the matrix-keymap binding with the following
15 - compatible: should be one of the following
|
| /linux-4.1.27/Documentation/ |
| D | dcdbas.txt | 8 Dell OpenManage requires this driver on the following Dell PowerEdge systems:
26 The driver creates the following sysfs entries for systems management
34 Systems management software must perform the following steps to execute
52 The driver creates the following sysfs entries for systems management software
60 Dell OpenManage performs the following steps to execute a power cycle or
73 The following table shows the value to write to host_control_smi_type to
|
| D | kernel-per-CPU-kthreads.txt | 37 To reduce its OS jitter, do any of the following:
51 To reduce its OS jitter, do the following:
57 To reduce its OS jitter, do one of the following:
68 TIMER_SOFTIRQ: Do all of the following:
79 NET_TX_SOFTIRQ and NET_RX_SOFTIRQ: Do all of the following:
86 BLOCK_SOFTIRQ: Do all of the following:
93 BLOCK_IOPOLL_SOFTIRQ: Do all of the following:
100 TASKLET_SOFTIRQ: Do one or more of the following:
106 SCHED_SOFTIRQ: Do all of the following:
124 HRTIMER_SOFTIRQ: Do all of the following:
[all …]
|
| D | vme_api.txt | 9 achieved via a call to the following function:
51 'struct vme_dev' structure looks like the following:
132 Once a master window has been assigned the following functions can be used to
153 The following functions can be used to read from and write to configured master
187 Once a slave window has been assigned the following functions can be used to
239 The following functions are provided to create and destroy DMA lists. Execution
251 An item can be added to a list using the following function ( the source and
287 The following function should be used to free an attribute:
295 The following function queues a list for execution. The function will return
312 The following functions can be used to attach and free a specific VME level and
[all …]
|
| D | mono.txt | 9 other program after you have done the following:
33 3) Add the following entries to /etc/rc.local or similar script
40 # the following command automatically when the
43 # Thus, it is possible that the following line
|
| D | coccinelle.txt | 32 Once you have it, run the following command:
53 'report' generates a list in the following format:
73 To make a report for every semantic patch, run the following command:
127 following command may be used:
173 'report' generates a list in the following format:
182 will execute the following part of the SmPL script.
220 will execute the following part of the SmPL script.
264 will execute the following part of the SmPL script.
299 will execute the following part of the SmPL script.
|
| /linux-4.1.27/Documentation/devicetree/bindings/hsi/ |
| D | nokia-modem.txt | 4 and inherits all required properties. The following additional
10 - hsi-channel-names: Should contain the following strings
17 - gpio-names: Should contain the following strings
|
| /linux-4.1.27/arch/arm/boot/dts/ |
| D | alpine-db.dts | 9 * without modification, are permitted provided that the following conditions
13 * this list of conditions and the following disclaimer.
16 * notice, this list of conditions and the following disclaimer in
|
| D | bcm911360k.dts | 7 * modification, are permitted provided that the following conditions
11 * notice, this list of conditions and the following disclaimer.
13 * notice, this list of conditions and the following disclaimer in
|
| D | bcm958300k.dts | 7 * modification, are permitted provided that the following conditions
11 * notice, this list of conditions and the following disclaimer.
13 * notice, this list of conditions and the following disclaimer in
|
| D | bcm958305k.dts | 7 * modification, are permitted provided that the following conditions
11 * notice, this list of conditions and the following disclaimer.
13 * notice, this list of conditions and the following disclaimer in
|
| D | bcm911360_entphn.dts | 7 * modification, are permitted provided that the following conditions
11 * notice, this list of conditions and the following disclaimer.
13 * notice, this list of conditions and the following disclaimer in
|
| D | bcm-cygnus-clock.dtsi | 7 * modification, are permitted provided that the following conditions
11 * notice, this list of conditions and the following disclaimer.
13 * notice, this list of conditions and the following disclaimer in
|
| /linux-4.1.27/Documentation/s390/ |
| D | kvm.txt | 13 KVM does support the following ioctls on s390 that are common with other
24 In addition, on s390 the following architecture specific ioctls are supported:
40 KVM does support the following ioctls on s390 that are common with other
58 In addition, on s390 the following architecture specific ioctls for the kvm-vm
66 submitted as floating interrupts. The following interrupts are not considered
74 KVM does support the following ioctls on s390 that are common with other
84 In addition, on s390 the following architecture specific ioctls for the
91 submitted for a specific cpu. The following interrupts are not considered
104 argument, unless one of the following values defined in include/linux/kvm.h
|
| /linux-4.1.27/Documentation/devicetree/bindings/soc/mediatek/ |
| D | pwrap.txt | 24 - reg-names: Must include the following entries:
28 - reset-names: Must include the following entries:
32 - clock-names: Must include the following entries:
39 See the following for child node definitions:
|
| /linux-4.1.27/Documentation/devicetree/bindings/gpio/ |
| D | gpio-tz1090.txt | 21 nodes should have the following values.
29 Only the following flags are supported:
42 client nodes should have the following values.
50 <dt-bindings/interrupt-controller/irq.h>. Only the following flags are
|
| D | gpio-tz1090-pdc.txt | 12 nodes should have the following values.
20 Only the following flags are supported:
|
| /linux-4.1.27/Documentation/devicetree/bindings/spi/ |
| D | spi-samsung.txt | 8 - compatible: should be one of the following.
20 - dmas : Two or more DMA channel specifiers following the convention outlined
45 - The spi slave nodes should provide the following information which is required
49 miso line (to account for any lag in the miso line). The following are the
60 the following format 'spi{n}' where n is a unique number for the alias.
|
| D | nvidia,tegra114-spi.txt | 9 - clock-names : Must include the following entries:
13 - reset-names : Must include the following entries:
17 - dma-names : Must include the following entries:
|
| D | spi-bus.txt | 9 The SPI master node requires the following properties:
13 - compatible - name of SPI bus controller following generic names
37 following mapping:
45 contain the following properties.
47 - compatible - (required) name of SPI device following generic names
|
| D | spi_pl022.txt | 13 - pl022,autosuspend-delay : delay in ms following transfer completion before
19 - dmas : Two or more DMA channel specifiers following the convention outlined
27 contain the following properties.
|
| D | nvidia,tegra20-sflash.txt | 11 - reset-names : Must include the following entries:
15 - dma-names : Must include the following entries:
|
| D | nvidia,tegra20-slink.txt | 11 - reset-names : Must include the following entries:
15 - dma-names : Must include the following entries:
|
| D | spi-img-spfi.txt | 9 - clock-names: Must include the following entries:
14 - dma-names: Must include the following entries:
|
| /linux-4.1.27/Documentation/devicetree/bindings/ata/ |
| D | tegra-sata.txt | 13 - clock-names : Must include the following entries:
20 - reset-names : Must include the following entries:
26 - phy-names : Must include the following entries:
|
| /linux-4.1.27/Documentation/fb/ |
| D | ep93xx-fb.txt | 30 following:
39 The framebuffer device can be registered by adding the following to
50 documented in section 7 of the EP93xx users' guide. The following
67 following flags:
104 The video mode is set using the following syntax:
129 error is returned. The check can be disabled by adding the following
|
| D | pvr2fb.txt | 33 The following video modes are supported:
50 cable:X - cable type. This can be any of the following: vga, rgb, and
53 output:X - output type. This can be any of the following: pal, ntsc, and
|
| /linux-4.1.27/Documentation/devicetree/bindings/sound/ |
| D | qcom,lpass-cpu.txt | 9 - clock-names : A list which must include the following entries:
15 - interrupt-names : A list which must include the following entries:
22 - reg-names : A list which must include the following entries:
|
| D | nvidia,tegra20-i2s.txt | 9 - reset-names : Must include the following entries:
13 - dma-names : Must include the following entries:
|
| D | nvidia,tegra30-hda.txt | 11 - clock-names : Must include the following entries: hda, hdacodec_2x, hda2hdmi
14 - reset-names : Must include the following entries: hda, hdacodec_2x, hda2hdmi
|
| D | nvidia,tegra30-ahub.txt | 15 - clock-names : Must include the following entries:
20 - reset-names : Must include the following entries:
49 - dma-names : Must include the following entries:
|
| D | nvidia,tegra20-ac97.txt | 9 - reset-names : Must include the following entries:
13 - dma-names : Must include the following entries:
|
| /linux-4.1.27/Documentation/hwmon/ |
| D | smsc47b397 | 17 The following specification describes the SMSC LPC47B397-NC[1] sensor chip
37 The temperature information is located in the following registers:
44 The following is an example of how to read the HWM temperature registers:
57 The fan speed information is located in the following registers:
85 To program the configuration registers, the following sequence must be followed:
114 The following is an example of how to read the SIO Device ID located at 0x20
139 The following is an example of how to read the HWM Base Address located in
|
| D | nct7904 | 26 Currently, the driver supports only the following features:
52 The following features are not supported in current version:
|
| /linux-4.1.27/Documentation/xtensa/ |
| D | mmu.txt | 6 located in one of the following address ranges:
16 The code has the following assumptions:
24 TLB setup proceeds along the following steps.
50 for details on the syntax and semantic of simple-bus nodes. The following
|
| /linux-4.1.27/Documentation/devicetree/bindings/mfd/ |
| D | sky81452.txt | 8 - backlight : container node for backlight following the binding
10 - regulator : container node for regulators following the binding
|
| D | as3711.txt | 12 To use the SU1 converter as a backlight source the following two properties must
17 To use the SU2 converter as a backlight source the following two properties must
36 If "su2-feedback-curr-auto" is selected, one or more of the following properties
|
| D | mt6397.txt | 3 MT6397 is a multifunction device with the following sub modules:
12 See the following for pwarp node definitions:
|
| /linux-4.1.27/Documentation/scsi/ |
| D | LICENSE.FlashPoint | 29 modification, are permitted provided that the following conditions are
33 file, without modification, this list of conditions, and the following
34 disclaimer. The following copyright notice must appear immediately at
43 notice, this list of conditions and the following disclaimer in the
|
| D | bfa.txt | 38 and then click following respective util package link:
53 and then click following respective util pacakge link
69 and use the following inbox and out-of-box driver version mapping to find
|
| /linux-4.1.27/drivers/s390/cio/ |
| D | itcw.c | 318 struct tidaw *following; in itcw_add_tidaw() local
327 following = ((struct tidaw *) tcw_get_data(itcw->tcw)) in itcw_add_tidaw()
329 if (itcw->num_tidaws && !((unsigned long) following & ~PAGE_MASK)) { in itcw_add_tidaw()
331 TIDAW_FLAGS_TTIC, following, 0); in itcw_add_tidaw()
|
| /linux-4.1.27/tools/build/Documentation/ |
| D | Build.txt | 24 interface/usage is following:
47 Assume we have the following project structure:
64 To follow the above example, the user provides following 'Build' files:
83 which creates the following objects:
109 It's possible to alter the standard object C flags in the following way:
|
| /linux-4.1.27/Documentation/devicetree/bindings/power/ |
| D | rx51-battery.txt | 6 - compatible: Should contain one of the following:
10 - io-channel-names: Should contain the following values:
|
| /linux-4.1.27/arch/blackfin/ |
| D | Clear_BSD.txt | 7 disclaimer below) provided that the following conditions are met:
10 notice, this list of conditions and the following disclaimer.
13 notice, this list of conditions and the following disclaimer in the
|
| /linux-4.1.27/Documentation/devicetree/bindings/nvec/ |
| D | nvidia,nvec.txt | 12 - clock-names : Must include the following entries:
20 - reset-names : Must include the following entries:
|
| /linux-4.1.27/arch/powerpc/boot/dts/fsl/ |
| D | qoriq-qman1.dtsi | 7 * modification, are permitted provided that the following conditions are met:
9 * notice, this list of conditions and the following disclaimer.
11 * notice, this list of conditions and the following disclaimer in the
|
| D | pq3-i2c-0.dtsi | 7 * modification, are permitted provided that the following conditions are met:
9 * notice, this list of conditions and the following disclaimer.
11 * notice, this list of conditions and the following disclaimer in the
|
| D | pq3-etsec2-grp2-2.dtsi | 7 * modification, are permitted provided that the following conditions are met:
9 * notice, this list of conditions and the following disclaimer.
11 * notice, this list of conditions and the following disclaimer in the
|
| D | qoriq-usb2-mph-0.dtsi | 7 * modification, are permitted provided that the following conditions are met:
9 * notice, this list of conditions and the following disclaimer.
11 * notice, this list of conditions and the following disclaimer in the
|
| D | qoriq-sata2-0.dtsi | 7 * modification, are permitted provided that the following conditions are met:
9 * notice, this list of conditions and the following disclaimer.
11 * notice, this list of conditions and the following disclaimer in the
|
| D | qoriq-gpio-2.dtsi | 7 * modification, are permitted provided that the following conditions are met:
9 * notice, this list of conditions and the following disclaimer.
11 * notice, this list of conditions and the following disclaimer in the
|
| D | qoriq-qman3.dtsi | 7 * modification, are permitted provided that the following conditions are met:
9 * notice, this list of conditions and the following disclaimer.
11 * notice, this list of conditions and the following disclaimer in the
|
| D | qonverge-usb2-dr-0.dtsi | 7 * modification, are permitted provided that the following conditions are met:
9 * notice, this list of conditions and the following disclaimer.
11 * notice, this list of conditions and the following disclaimer in the
|
| D | pq3-espi-0.dtsi | 7 * modification, are permitted provided that the following conditions are met:
9 * notice, this list of conditions and the following disclaimer.
11 * notice, this list of conditions and the following disclaimer in the
|
| D | pq3-i2c-1.dtsi | 7 * modification, are permitted provided that the following conditions are met:
9 * notice, this list of conditions and the following disclaimer.
11 * notice, this list of conditions and the following disclaimer in the
|
| D | pq3-sata2-1.dtsi | 7 * modification, are permitted provided that the following conditions are met:
9 * notice, this list of conditions and the following disclaimer.
11 * notice, this list of conditions and the following disclaimer in the
|
| D | t1042si-post.dtsi | 7 * modification, are permitted provided that the following conditions are met:
9 * notice, this list of conditions and the following disclaimer.
11 * notice, this list of conditions and the following disclaimer in the
|
| D | qoriq-espi-0.dtsi | 7 * modification, are permitted provided that the following conditions are met:
9 * notice, this list of conditions and the following disclaimer.
11 * notice, this list of conditions and the following disclaimer in the
|
| D | pq3-mpic-message-B.dtsi | 7 * modification, are permitted provided that the following conditions are met:
9 * notice, this list of conditions and the following disclaimer.
11 * notice, this list of conditions and the following disclaimer in the
|
| D | pq3-etsec1-timer-0.dtsi | 7 * modification, are permitted provided that the following conditions are met:
9 * notice, this list of conditions and the following disclaimer.
11 * notice, this list of conditions and the following disclaimer in the
|
| D | pq3-esdhc-0.dtsi | 7 * modification, are permitted provided that the following conditions are met:
9 * notice, this list of conditions and the following disclaimer.
11 * notice, this list of conditions and the following disclaimer in the
|
| D | pq3-etsec2-grp2-1.dtsi | 7 * modification, are permitted provided that the following conditions are met:
9 * notice, this list of conditions and the following disclaimer.
11 * notice, this list of conditions and the following disclaimer in the
|
| D | pq3-usb2-dr-1.dtsi | 7 * modification, are permitted provided that the following conditions are met:
9 * notice, this list of conditions and the following disclaimer.
11 * notice, this list of conditions and the following disclaimer in the
|
| D | qoriq-gpio-3.dtsi | 7 * modification, are permitted provided that the following conditions are met:
9 * notice, this list of conditions and the following disclaimer.
11 * notice, this list of conditions and the following disclaimer in the
|
| D | pq3-etsec2-grp2-0.dtsi | 7 * modification, are permitted provided that the following conditions are met:
9 * notice, this list of conditions and the following disclaimer.
11 * notice, this list of conditions and the following disclaimer in the
|
| D | qoriq-esdhc-0.dtsi | 7 * modification, are permitted provided that the following conditions are met:
9 * notice, this list of conditions and the following disclaimer.
11 * notice, this list of conditions and the following disclaimer in the
|
| D | qoriq-bman1.dtsi | 7 * modification, are permitted provided that the following conditions are met:
9 * notice, this list of conditions and the following disclaimer.
11 * notice, this list of conditions and the following disclaimer in the
|
| D | qoriq-gpio-0.dtsi | 7 * modification, are permitted provided that the following conditions are met:
9 * notice, this list of conditions and the following disclaimer.
11 * notice, this list of conditions and the following disclaimer in the
|
| D | qoriq-usb2-dr-0.dtsi | 7 * modification, are permitted provided that the following conditions are met:
9 * notice, this list of conditions and the following disclaimer.
11 * notice, this list of conditions and the following disclaimer in the
|
| D | pq3-gpio-0.dtsi | 7 * modification, are permitted provided that the following conditions are met:
9 * notice, this list of conditions and the following disclaimer.
11 * notice, this list of conditions and the following disclaimer in the
|
| D | pq3-mpic-timer-B.dtsi | 7 * modification, are permitted provided that the following conditions are met:
9 * notice, this list of conditions and the following disclaimer.
11 * notice, this list of conditions and the following disclaimer in the
|
| D | qoriq-sata2-1.dtsi | 7 * modification, are permitted provided that the following conditions are met:
9 * notice, this list of conditions and the following disclaimer.
11 * notice, this list of conditions and the following disclaimer in the
|
| D | pq3-sata2-0.dtsi | 7 * modification, are permitted provided that the following conditions are met:
9 * notice, this list of conditions and the following disclaimer.
11 * notice, this list of conditions and the following disclaimer in the
|
| D | pq3-usb2-dr-0.dtsi | 7 * modification, are permitted provided that the following conditions are met:
9 * notice, this list of conditions and the following disclaimer.
11 * notice, this list of conditions and the following disclaimer in the
|
| D | qoriq-gpio-1.dtsi | 7 * modification, are permitted provided that the following conditions are met:
9 * notice, this list of conditions and the following disclaimer.
11 * notice, this list of conditions and the following disclaimer in the
|
| D | interlaken-lac.dtsi | 7 * modification, are permitted provided that the following conditions are met:
9 * notice, this list of conditions and the following disclaimer.
11 * notice, this list of conditions and the following disclaimer in the
|
| D | qoriq-i2c-0.dtsi | 7 * modification, are permitted provided that the following conditions are met:
9 * notice, this list of conditions and the following disclaimer.
11 * notice, this list of conditions and the following disclaimer in the
|
| D | bsc9131si-pre.dtsi | 7 * modification, are permitted provided that the following conditions are met:
9 * notice, this list of conditions and the following disclaimer.
11 * notice, this list of conditions and the following disclaimer in the
|
| D | pq3-etsec1-2.dtsi | 7 * modification, are permitted provided that the following conditions are met:
9 * notice, this list of conditions and the following disclaimer.
11 * notice, this list of conditions and the following disclaimer in the
|
| D | pq3-etsec2-2.dtsi | 7 * modification, are permitted provided that the following conditions are met:
9 * notice, this list of conditions and the following disclaimer.
11 * notice, this list of conditions and the following disclaimer in the
|
| D | qoriq-i2c-1.dtsi | 7 * modification, are permitted provided that the following conditions are met:
9 * notice, this list of conditions and the following disclaimer.
11 * notice, this list of conditions and the following disclaimer in the
|
| D | pq3-sec3.0-0.dtsi | 7 * modification, are permitted provided that the following conditions are met:
9 * notice, this list of conditions and the following disclaimer.
11 * notice, this list of conditions and the following disclaimer in the
|
| D | pq3-duart-0.dtsi | 7 * modification, are permitted provided that the following conditions are met:
9 * notice, this list of conditions and the following disclaimer.
11 * notice, this list of conditions and the following disclaimer in the
|
| D | mpc8536si-pre.dtsi | 7 * modification, are permitted provided that the following conditions are met:
9 * notice, this list of conditions and the following disclaimer.
11 * notice, this list of conditions and the following disclaimer in the
|
| D | mpc8544si-pre.dtsi | 7 * modification, are permitted provided that the following conditions are met:
9 * notice, this list of conditions and the following disclaimer.
11 * notice, this list of conditions and the following disclaimer in the
|
| D | p1021si-pre.dtsi | 7 * modification, are permitted provided that the following conditions are met:
9 * notice, this list of conditions and the following disclaimer.
11 * notice, this list of conditions and the following disclaimer in the
|
| D | bsc9132si-pre.dtsi | 7 * modification, are permitted provided that the following conditions are met:
9 * notice, this list of conditions and the following disclaimer.
11 * notice, this list of conditions and the following disclaimer in the
|
| D | mpc8572si-pre.dtsi | 7 * modification, are permitted provided that the following conditions are met:
9 * notice, this list of conditions and the following disclaimer.
11 * notice, this list of conditions and the following disclaimer in the
|
| D | pq3-etsec1-0.dtsi | 7 * modification, are permitted provided that the following conditions are met:
9 * notice, this list of conditions and the following disclaimer.
11 * notice, this list of conditions and the following disclaimer in the
|
| D | mpc8548si-pre.dtsi | 7 * modification, are permitted provided that the following conditions are met:
9 * notice, this list of conditions and the following disclaimer.
11 * notice, this list of conditions and the following disclaimer in the
|
| D | qoriq-duart-1.dtsi | 7 * modification, are permitted provided that the following conditions are met:
9 * notice, this list of conditions and the following disclaimer.
11 * notice, this list of conditions and the following disclaimer in the
|
| D | c293si-pre.dtsi | 7 * modification, are permitted provided that the following conditions are met:
9 * notice, this list of conditions and the following disclaimer.
11 * notice, this list of conditions and the following disclaimer in the
|
| D | pq3-sec3.1-0.dtsi | 7 * modification, are permitted provided that the following conditions are met:
9 * notice, this list of conditions and the following disclaimer.
11 * notice, this list of conditions and the following disclaimer in the
|
| D | mpc8569si-pre.dtsi | 7 * modification, are permitted provided that the following conditions are met:
9 * notice, this list of conditions and the following disclaimer.
11 * notice, this list of conditions and the following disclaimer in the
|
| D | pq3-etsec1-1.dtsi | 7 * modification, are permitted provided that the following conditions are met:
9 * notice, this list of conditions and the following disclaimer.
11 * notice, this list of conditions and the following disclaimer in the
|
| D | p1020si-pre.dtsi | 7 * modification, are permitted provided that the following conditions are met:
9 * notice, this list of conditions and the following disclaimer.
11 * notice, this list of conditions and the following disclaimer in the
|
| D | p1022si-pre.dtsi | 7 * modification, are permitted provided that the following conditions are met:
9 * notice, this list of conditions and the following disclaimer.
11 * notice, this list of conditions and the following disclaimer in the
|
| D | pq3-etsec2-1.dtsi | 7 * modification, are permitted provided that the following conditions are met:
9 * notice, this list of conditions and the following disclaimer.
11 * notice, this list of conditions and the following disclaimer in the
|
| D | qoriq-duart-0.dtsi | 7 * modification, are permitted provided that the following conditions are met:
9 * notice, this list of conditions and the following disclaimer.
11 * notice, this list of conditions and the following disclaimer in the
|
| D | pq3-etsec1-3.dtsi | 7 * modification, are permitted provided that the following conditions are met:
9 * notice, this list of conditions and the following disclaimer.
11 * notice, this list of conditions and the following disclaimer in the
|
| D | pq3-etsec2-0.dtsi | 7 * modification, are permitted provided that the following conditions are met:
9 * notice, this list of conditions and the following disclaimer.
11 * notice, this list of conditions and the following disclaimer in the
|
| D | mpc8568si-pre.dtsi | 7 * modification, are permitted provided that the following conditions are met:
9 * notice, this list of conditions and the following disclaimer.
11 * notice, this list of conditions and the following disclaimer in the
|
| D | pq3-sec3.3-0.dtsi | 7 * modification, are permitted provided that the following conditions are met:
9 * notice, this list of conditions and the following disclaimer.
11 * notice, this list of conditions and the following disclaimer in the
|
| D | pq3-sec2.1-0.dtsi | 7 * modification, are permitted provided that the following conditions are met:
9 * notice, this list of conditions and the following disclaimer.
11 * notice, this list of conditions and the following disclaimer in the
|
| D | p1010si-pre.dtsi | 7 * modification, are permitted provided that the following conditions are met:
9 * notice, this list of conditions and the following disclaimer.
11 * notice, this list of conditions and the following disclaimer in the
|
| D | pq3-dma-1.dtsi | 7 * modification, are permitted provided that the following conditions are met:
9 * notice, this list of conditions and the following disclaimer.
11 * notice, this list of conditions and the following disclaimer in the
|
| D | qoriq-rmu-0.dtsi | 7 * modification, are permitted provided that the following conditions are met:
9 * notice, this list of conditions and the following disclaimer.
11 * notice, this list of conditions and the following disclaimer in the
|
| D | b4420si-pre.dtsi | 7 * modification, are permitted provided that the following conditions are met:
9 * notice, this list of conditions and the following disclaimer.
11 * notice, this list of conditions and the following disclaimer in the
|
| D | pq3-rmu-0.dtsi | 7 * modification, are permitted provided that the following conditions are met:
9 * notice, this list of conditions and the following disclaimer.
11 * notice, this list of conditions and the following disclaimer in the
|
| D | qoriq-dma-1.dtsi | 7 * modification, are permitted provided that the following conditions are met:
9 * notice, this list of conditions and the following disclaimer.
11 * notice, this list of conditions and the following disclaimer in the
|
| D | pq3-mpic.dtsi | 7 * modification, are permitted provided that the following conditions are met:
9 * notice, this list of conditions and the following disclaimer.
11 * notice, this list of conditions and the following disclaimer in the
|
| D | p2020si-pre.dtsi | 7 * modification, are permitted provided that the following conditions are met:
9 * notice, this list of conditions and the following disclaimer.
11 * notice, this list of conditions and the following disclaimer in the
|
| D | p1023si-pre.dtsi | 7 * modification, are permitted provided that the following conditions are met:
9 * notice, this list of conditions and the following disclaimer.
11 * notice, this list of conditions and the following disclaimer in the
|
| D | qoriq-dma-0.dtsi | 7 * modification, are permitted provided that the following conditions are met:
9 * notice, this list of conditions and the following disclaimer.
11 * notice, this list of conditions and the following disclaimer in the
|
| D | pq3-dma-0.dtsi | 7 * modification, are permitted provided that the following conditions are met:
9 * notice, this list of conditions and the following disclaimer.
11 * notice, this list of conditions and the following disclaimer in the
|
| D | t2080si-post.dtsi | 7 * modification, are permitted provided that the following conditions are met:
9 * notice, this list of conditions and the following disclaimer.
11 * notice, this list of conditions and the following disclaimer in the
|
| D | qoriq-sec6.0-0.dtsi | 7 * modification, are permitted provided that the following conditions are met:
9 * notice, this list of conditions and the following disclaimer.
11 * notice, this list of conditions and the following disclaimer in the
|
| D | e500v2_power_isa.dtsi | 7 * modification, are permitted provided that the following conditions are met:
9 * notice, this list of conditions and the following disclaimer.
11 * notice, this list of conditions and the following disclaimer in the
|
| D | t208xsi-pre.dtsi | 7 * modification, are permitted provided that the following conditions are met:
9 * notice, this list of conditions and the following disclaimer.
11 * notice, this list of conditions and the following disclaimer in the
|
| D | qoriq-clockgen2.dtsi | 7 * modification, are permitted provided that the following conditions are met:
9 * notice, this list of conditions and the following disclaimer.
11 * notice, this list of conditions and the following disclaimer in the
|
| D | e500mc_power_isa.dtsi | 7 * modification, are permitted provided that the following conditions are met:
9 * notice, this list of conditions and the following disclaimer.
11 * notice, this list of conditions and the following disclaimer in the
|
| D | elo3-dma-0.dtsi | 7 * modification, are permitted provided that the following conditions are met:
9 * notice, this list of conditions and the following disclaimer.
11 * notice, this list of conditions and the following disclaimer in the
|
| D | b4860si-pre.dtsi | 7 * modification, are permitted provided that the following conditions are met:
9 * notice, this list of conditions and the following disclaimer.
11 * notice, this list of conditions and the following disclaimer in the
|
| D | elo3-dma-1.dtsi | 7 * modification, are permitted provided that the following conditions are met:
9 * notice, this list of conditions and the following disclaimer.
11 * notice, this list of conditions and the following disclaimer in the
|
| D | qoriq-mpic.dtsi | 7 * modification, are permitted provided that the following conditions are met:
9 * notice, this list of conditions and the following disclaimer.
11 * notice, this list of conditions and the following disclaimer in the
|
| D | elo3-dma-2.dtsi | 7 * modification, are permitted provided that the following conditions are met:
9 * notice, this list of conditions and the following disclaimer.
11 * notice, this list of conditions and the following disclaimer in the
|
| D | pq3-sec4.4-0.dtsi | 7 * modification, are permitted provided that the following conditions are met:
9 * notice, this list of conditions and the following disclaimer.
11 * notice, this list of conditions and the following disclaimer in the
|
| D | e5500_power_isa.dtsi | 7 * modification, are permitted provided that the following conditions are met:
9 * notice, this list of conditions and the following disclaimer.
11 * notice, this list of conditions and the following disclaimer in the
|
| D | p5020si-pre.dtsi | 7 * modification, are permitted provided that the following conditions are met:
9 * notice, this list of conditions and the following disclaimer.
11 * notice, this list of conditions and the following disclaimer in the
|
| D | qoriq-bman1-portals.dtsi | 7 * modification, are permitted provided that the following conditions are met:
9 * notice, this list of conditions and the following disclaimer.
11 * notice, this list of conditions and the following disclaimer in the
|
| D | qoriq-sec4.0-0.dtsi | 7 * modification, are permitted provided that the following conditions are met:
9 * notice, this list of conditions and the following disclaimer.
11 * notice, this list of conditions and the following disclaimer in the
|
| /linux-4.1.27/arch/powerpc/boot/dts/ |
| D | t1040rdb.dts | 7 * modification, are permitted provided that the following conditions are met:
9 * notice, this list of conditions and the following disclaimer.
11 * notice, this list of conditions and the following disclaimer in the
|
| D | t1042rdb.dts | 7 * modification, are permitted provided that the following conditions are met:
9 * notice, this list of conditions and the following disclaimer.
11 * notice, this list of conditions and the following disclaimer in the
|
| D | t1042qds.dts | 7 * modification, are permitted provided that the following conditions are met:
9 * notice, this list of conditions and the following disclaimer.
11 * notice, this list of conditions and the following disclaimer in the
|
| D | t1040qds.dts | 7 * modification, are permitted provided that the following conditions are met:
9 * notice, this list of conditions and the following disclaimer.
11 * notice, this list of conditions and the following disclaimer in the
|
| D | t2081qds.dts | 7 * modification, are permitted provided that the following conditions are met:
9 * notice, this list of conditions and the following disclaimer.
11 * notice, this list of conditions and the following disclaimer in the
|
| D | p1010rdb-pa_36b.dts | 7 * modification, are permitted provided that the following conditions are met:
9 * notice, this list of conditions and the following disclaimer.
11 * notice, this list of conditions and the following disclaimer in the
|
| D | t1042rdb_pi.dts | 7 * modification, are permitted provided that the following conditions are met:
9 * notice, this list of conditions and the following disclaimer.
11 * notice, this list of conditions and the following disclaimer in the
|
| D | t2080qds.dts | 7 * modification, are permitted provided that the following conditions are met:
9 * notice, this list of conditions and the following disclaimer.
11 * notice, this list of conditions and the following disclaimer in the
|
| D | b4420qds.dts | 7 * modification, are permitted provided that the following conditions are met:
9 * notice, this list of conditions and the following disclaimer.
11 * notice, this list of conditions and the following disclaimer in the
|
| D | p1010rdb-pb_36b.dts | 7 * modification, are permitted provided that the following conditions are met:
9 * notice, this list of conditions and the following disclaimer.
11 * notice, this list of conditions and the following disclaimer in the
|
| D | t2080rdb.dts | 7 * modification, are permitted provided that the following conditions are met:
9 * notice, this list of conditions and the following disclaimer.
11 * notice, this list of conditions and the following disclaimer in the
|
| D | b4860qds.dts | 7 * modification, are permitted provided that the following conditions are met:
9 * notice, this list of conditions and the following disclaimer.
11 * notice, this list of conditions and the following disclaimer in the
|
| D | bsc9131rdb.dtsi | 7 * modification, are permitted provided that the following conditions are met:
9 * notice, this list of conditions and the following disclaimer.
11 * notice, this list of conditions and the following disclaimer in the
|
| D | p1010rdb_32b.dtsi | 7 * modification, are permitted provided that the following conditions are met:
9 * notice, this list of conditions and the following disclaimer.
11 * notice, this list of conditions and the following disclaimer in the
|
| D | bsc9132qds.dtsi | 7 * modification, are permitted provided that the following conditions are met:
9 * notice, this list of conditions and the following disclaimer.
11 * notice, this list of conditions and the following disclaimer in the
|
| D | p1010rdb-pa.dtsi | 7 * modification, are permitted provided that the following conditions are met:
9 * notice, this list of conditions and the following disclaimer.
11 * notice, this list of conditions and the following disclaimer in the
|
| D | p1024rdb_32b.dts | 7 * modification, are permitted provided that the following conditions are met:
9 * notice, this list of conditions and the following disclaimer.
11 * notice, this list of conditions and the following disclaimer in the
|
| D | p1020mbg-pc_36b.dts | 7 * modification, are permitted provided that the following conditions are met:
9 * notice, this list of conditions and the following disclaimer.
11 * notice, this list of conditions and the following disclaimer in the
|
| D | p1020rdb-pc_32b.dts | 7 * modification, are permitted provided that the following conditions are met:
9 * notice, this list of conditions and the following disclaimer.
11 * notice, this list of conditions and the following disclaimer in the
|
| /linux-4.1.27/Documentation/sound/alsa/soc/ |
| D | platform.txt | 11 The platform DMA driver optionally supports the following ALSA operations:-
58 Each SoC DAI driver must provide the following features:-
72 Each SoC DSP driver usually supplies the following features :-
|
| /linux-4.1.27/Documentation/sound/oss/ |
| D | PAS16 | 15 The following information is relevant information from README.OSS
19 The pas2_card.c driver supports the following cards --
63 The following configuration options are relevant to configuring the PAS16:
130 In addition, you must either add the following line to
133 or else add the following line to /etc/lilo.conf:
139 To use the PAS16 in my computer I have enabled the following sound
150 I have also included the following append line in /etc/lilo.conf:
157 following line would be appropriate:
|
| /linux-4.1.27/Documentation/networking/ |
| D | mac80211-injection.txt | 6 following format:
16 to appear on received packets. The following information is parsed from the
57 interface), along the following lines:
|
| D | dl2k.txt | 37 Install linux driver as following command:
48 5. Add the following line to /etc/modprobe.d/dl2k.conf:
70 Kernels 2.4.7. Copy the files to a directory and enter the following command
121 it is necessary to issue the following command:
126 Linux), enter the following command:
140 The following are the commands to list the currently loaded modules and
150 automatically loaded and configured at boot time. The following description
159 /etc/modprobe.d/ directory. Add the following lines:
262 Make sure all files are Unix file format (no LF). Try the following
|
| D | LICENSE.qla3xxx | 11 under the following terms:
15 conditions and the following disclaimer.
19 following disclaimer in the documentation and/or other
|
| D | dns_resolver.txt | 29 It does not yet support the following AFS features:
51 basic dname to IPv4/IPv6 address resolution, the following line should be
58 To direct a query for query type 'foo', a line of the following should be added
68 To make use of this facility, one of the following functions that are
155 following file:
|
| /linux-4.1.27/Documentation/devicetree/bindings/arm/samsung/ |
| D | pmu.txt | 4 - compatible : should contain two values. First value must be one from following list:
24 following format:
36 following properties:
|
| /linux-4.1.27/Documentation/devicetree/bindings/usb/ |
| D | exynos-usb.txt | 4 The device node has following properties.
16 One phy per port. Each port should have following entries:
57 One phy per port. Each port should have following entries:
85 - compatible: should be one of the following -
|
| D | nvidia,tegra20-ehci.txt | 5 Practice : Universal Serial Bus" with the following modifications
18 - reset-names : Must include the following entries:
|
| D | nvidia,tegra20-usb-phy.txt | 10 - reg : Defines the following set of registers, in the order listed:
17 - clock-names : The following clock names must be present:
28 - reset-names : Must include the following entries:
43 - Either one of the following for HS driver output control:
|
| /linux-4.1.27/Documentation/devicetree/bindings/pwm/ |
| D | pwm-samsung.txt | 11 - compatible : should be one of following:
22 - clock-names: should contain all following required clock names:
24 and any subset of following optional clock names:
|
| /linux-4.1.27/Documentation/devicetree/bindings/arm/bcm/ |
| D | brcm,bcm11351-cpu-method.txt | 4 CPUs in the following Broadcom SoCs:
7 The enable method is specified by defining the following required
|
| /linux-4.1.27/Documentation/ABI/testing/ |
| D | sysfs-bus-coresight-devices-etb10 | 22 following the trigger event. The number of 32-bit words written
23 into the Trace RAM following the trigger event is equal to the
|
| D | sysfs-devices-memory | 50 using the following commands.
57 string "online" the following command can be executed by
79 For example, the following symbolic link is created for
91 memory section directory. For example, the following symbolic
|
| /linux-4.1.27/Documentation/devicetree/bindings/crypto/ |
| D | samsung-sss.txt | 3 The SSS module in S5PV210 SoC supports the following:
13 supports the following also:
|
| /linux-4.1.27/Documentation/devicetree/bindings/dma/ |
| D | mv-xor.txt | 11 XOR engine has. Those sub-nodes have the following required
15 And the following optional properties:
|
| /linux-4.1.27/Documentation/devicetree/bindings/timer/ |
| D | marvell,armada-370-xp-timer.txt | 5 - compatible: Should be one of the following
21 - clock-names : Must include the following entries:
|
| /linux-4.1.27/Documentation/devicetree/bindings/arm/tegra/ |
| D | nvidia,tegra30-actmon.txt | 14 - clock-names: Must include the following entries:
19 - reset-names: Must include the following entries:
|
| /linux-4.1.27/Documentation/devicetree/bindings/pci/ |
| D | fsl,imx6q-pcie.txt | 11 - interrupt-names: Must include the following entries:
13 - clock-names: Must include the following additional entries:
|
| /linux-4.1.27/Documentation/devicetree/bindings/serial/ |
| D | nvidia,tegra20-hsuart.txt | 11 - reset-names : Must include the following entries:
15 - dma-names : Must include the following entries:
|
| /linux-4.1.27/Documentation/devicetree/bindings/i2c/ |
| D | i2c-mux-pca954x.txt | 5 - compatible: Must contain one of the following.
11 The following required properties are defined externally:
|
| /linux-4.1.27/Documentation/i2c/busses/ |
| D | scx200_acb | 27 If the scx200_acb driver is built into the kernel, add the following
30 If the scx200_acb driver is built as a module, add the following line to
|
| /linux-4.1.27/Documentation/dmaengine/ |
| D | dmatest.txt | 10 The menuconfig contains an option that could be found by following path:
32 Hint: available channel list could be extracted by running the following
42 The following command returns the state of the test.
49 before returning. For example, the following scripts wait for 42 tests
|
| /linux-4.1.27/Documentation/sound/alsa/ |
| D | OSS-Emulation.txt | 44 ALSA supports the following OSS device files:
77 snd-pcm-oss and snd-rawmidi. In the case of PCM, the following
96 To change the mapping of MIDI devices, the following options are
126 The command sequence has the following syntax:
135 options is the optional parameters. The following options are
152 quake, send a command via echo like the following:
173 for OSS devices, define like the following:
212 As default, ALSA uses the following control for OSS volumes:
247 file, /proc/asound/cardX/oss_mixer, which will be like the following
263 send the command like the following:
|
| /linux-4.1.27/Documentation/devicetree/bindings/net/ |
| D | apm-xgene-enet.txt | 7 - compatible: Should state binding information from the following list,
29 - mdio: Device tree subnode with the following required properties:
34 For the phy on the mdio bus, there must be a node with the following fields:
|
| /linux-4.1.27/arch/x86/crypto/ |
| D | crct10dif-pcl-asm_64.S | 19 # modification, are permitted provided that the following conditions are
23 # notice, this list of conditions and the following disclaimer.
26 # notice, this list of conditions and the following disclaimer in the
|
| /linux-4.1.27/Documentation/devicetree/bindings/mtd/ |
| D | pxa3xx-nand.txt | 5 - compatible: Should be set to one of the following:
23 The following ECC strength and step size are currently supported:
|
| D | lpc32xx-slc.txt | 9 The following required properties are very controller specific. See the LPC32xx
13 (The following values are specified in Hz, to make them independent of actual
|
| /linux-4.1.27/Documentation/devicetree/bindings/reset/ |
| D | fsl,imx-src.txt | 43 The following RESET_INDEX values are valid for i.MX5:
48 The following additional RESET_INDEX value is valid for i.MX6:
|
| /linux-4.1.27/Documentation/devicetree/ |
| D | of_unittest.txt | 12 It is recommended to read the following documents before moving ahead.
27 drivers/of/unittest.c. Currently, following Device Tree Source Include files
35 When the kernel is build with OF_SELFTEST enabled, then the following make rule
43 After that, using the following rule the binary blob above is wrapped as an
60 // following struct members are used to construct the tree
104 via the following kernel symbols:
|
| /linux-4.1.27/Documentation/devicetree/bindings/regulator/ |
| D | max8952.txt | 14 - max8952,sync-freq: sync frequency, must be one of following values:
19 - max8952,ramp-speed: voltage ramp speed, must be one of following values:
|
| /linux-4.1.27/Documentation/devicetree/bindings/interrupt-controller/ |
| D | brcm,bcm3380-l2-intc.txt | 4 chipsets. It has the following properties:
16 - reg: specifies one or more enable/status pairs, in the following format:
|
| /linux-4.1.27/scripts/coccinelle/misc/ |
| D | ifcol.cocci | 2 /// be indented. The code following an if should not be indented.
47 msg = "code aligned with following code on line %s" % (p2[0].line)
|