Home
last modified time | relevance | path

Searched refs:inputs (Results 1 – 200 of 232) sorted by relevance

12

/linux-4.1.27/Documentation/hwmon/
Dpcf859120 The PCF8591 is an 8-bit A/D and D/A converter (4 analog inputs and one
24 The PCF8591 has 4 analog inputs programmable as single-ended or
25 differential inputs :
26 - mode 0 : four single ended inputs
27 Pins AIN0 to AIN3 are single ended inputs for channels 0 to 3
29 - mode 1 : three differential inputs
31 Pins AIN0 to AIN2 are positive differential inputs for channels 0 to 2
34 Pins AIN0 and AIN1 are single ended inputs for channels 0 and 1
38 - mode 3 : two differential inputs
52 0 = four single ended inputs
[all …]
Dads101522 This device is a 12/16-bit A-D converter with 4 inputs.
24 The inputs can be used single ended or in certain differential combinations.
26 The inputs can be made available by 8 sysfs input files in0_input - in7_input:
36 Which inputs are available can be configured using platform data or devicetree.
38 By default all inputs are exported.
Dadt747535 measurement inputs and VID support. The ADT7490 also has additional
36 features, including extra voltage measurement inputs and PECI support. All
53 Each of the measured inputs (voltage, temperature, fan speed) has
57 The ADT747x samples all inputs continuously. The driver will not read
65 * 2 voltage inputs
69 * 2 voltage inputs
72 * 5 voltage inputs
76 * 6 voltage inputs
Dadm102619 List of GPIO pins (0-16) to program as inputs
42 sensor inputs and one internal sensor. Each sensor has a high and low
60 measurements. Several inputs have integrated attenuators so they can measure
62 dedicated inputs. There are several inputs scaled to 0-3V full-scale range
63 for SCSI terminator power. The remaining inputs are not scaled and have
74 The ADM1026 measures continuously. Analog inputs are measured about 4
79 temperature sensor inputs. Both the PWM output and the DAC output can be
Ddme173729 * force_start: bool Enables the monitoring of voltage, fan and temp inputs
68 The voltage inputs are sampled with 12-bit resolution and have internal
70 millivolts and don't need scaling. The voltage inputs are mapped as follows
118 Celsius. The chip also features offsets for all 3 temperature inputs which -
121 need any user-space adjustments. The temperature inputs are mapped as follows
137 Fan RPMs are measured with 16-bit resolution. The chip provides inputs for 6
138 fan tachometers. All 6 inputs have an associated min limit which triggers an
139 alarm when crossed. Fan inputs 1-4 provide type attributes that need to be set
141 generates. Supported values are 1, 2, and 4. Fan inputs 5-6 only support fans
142 that generate 2 pulses per revolution. Fan inputs 5-6 also provide a max
[all …]
Dadt741122 loses 2 inputs then). There are high- and low-limit registers for all inputs.
Ducd900025 current, or temperature inputs.
29 13 power-supply voltage, current, or temperature inputs. Twenty-six GPIO pins
37 voltage inputs. Twenty-three GPIO pins can be used for power supply enables,
44 13 power-supply voltage, current, or temperature inputs.
Dsmsc47m19224 These chips support 3 temperature channels and 8 voltage inputs
70 in[0-7]_alarm - alarm flags for voltage inputs
91 temp[1-3]_alarm - alarm flags for temperature inputs, '1' in case of alarm,
93 temp[2-3]_input_fault - diode fault flags for temperature inputs 2 and 3.
Dadm102528 comparison of various system parameters. Five voltage measurement inputs
50 only in that it has "open-drain VID inputs while the ADM1025 has on-chip
51 100k pull-ups on the VID inputs". It doesn't make any difference for us.
Dadt747030 Each of the measured inputs (temperature, fan speed) has corresponding high/low
34 The ADT7470 samples all inputs continuously. A kernel thread is started up for
71 The temperature inputs no longer need to be read periodically from userspace in
Dda905514 different inputs. The track and hold circuit ensures stable input voltages at
17 The ADC is used to measure the following inputs:
Dda905214 different inputs. The track and hold circuit ensures stable input voltages at
17 The ADC is used to measure the following inputs:
Dadt746230 Each of the measured inputs (voltage, temperature, fan speed) has
34 The ADT7462 samples all inputs continuously. The driver will not read
Dmc13783-adc24 Some channels can be used as General Purpose inputs or in a dedicated mode with
28 the General Purpose inputs and touchscreen.
Dlm8555 measuring fan speed. Five (5) digital inputs are provided for sampling the
59 The voltage inputs have internal scaling resistors so that the following
65 Remote 1 is generally the CPU temperature. These inputs are designed to
77 Each of the measured inputs (voltage, temperature, fan speed) has
81 The LM85 samples all inputs continuously. The lm85 driver will not read
132 versions on register level so these additional voltage inputs may read
Dpc8736043 but also monitoring eleven voltage inputs and two (PC87365) or up to four
141 are likely to be divided externally. The meaning of each of these inputs as
153 When available, VID inputs are used to provide the nominal CPU Core voltage.
155 The chipsets can handle two sets of VID inputs (on dual-CPU systems), but
Dit87124 The IT8712F and IT8716F additionally feature VID inputs, used to report
129 The IT8718F and IT8720F also features VID inputs (up to 8 pins) but the value
133 upper VID bits share their pins with voltage inputs (in5 and in6) so you
177 inputs can measure voltages between 0 and 4.08 volts, with a resolution of
182 voltage inputs are internal and scaled inside the chip:
Dpowr122017 includes voltage monitoring for 14 inputs as well as trim settings
Dmenf21bmc19 The voltage sensors are connected to the ADC inputs of the BMC which is
Dadm924064 edges of the fan tacho inputs.
82 Two fan tacho inputs are provided, the ADM9240 gates an internal 22.5kHz
145 The chip has five inputs to read the 5-bit VID and reports the mV value
Dnct790419 interface, up to 12 fan tachometer inputs, up to 4 fan control channels
Dsch563627 likely see fewer temperature and fan inputs.
Dw8379336 This driver exports 10 voltage sensors, up to 12 fan tachometer inputs,
105 Only Fan1-5 and PWM1-3 are guaranteed to always exist, other fan inputs and
Dasc762143 outputs or inputs and may be used as general purpose I/O or as alarm
96 The aSC7621 has tachometer inputs to measure fan speed on up to four fans.
113 tachometer inputs
Dmax166820 set; only two remote temperature inputs vs the four avaible on the other
Dadc128d81832 inputs can measure voltages between 0 and 2.55 volts, with a resolution
Dads782849 It can operate in single ended mode (8 +ve inputs) or in differential mode,
Dmax665039 fan1_div rw sets the speed range the inputs can handle. Legal
Dasb10070 * Are there really 13 voltage inputs? Probably not...
Df71805f43 6 VID inputs. The VID inputs are not yet supported by this driver.
Dlm8052 inputs can measure voltages between 0 and 2.55 volts, with a resolution
Dvt121143 capabilities. It monitors 2 dedicated temperature sensor inputs (temp1 and
55 The following table shows the relationship between the vt1211 inputs and the
Dsysfs-interface24 values conversion, labeling of inputs and hiding of unused inputs.
30 will have to implement conversion, labeling and hiding of inputs. For
294 temperature inputs and PWM outputs. When several temperature inputs are
Dlm7852 inputs can measure voltages between 0 and 4.08 volts, with a resolution
Dgl518sm56 volt. The other inputs measure voltages between 0.000 and 4.845 volt, with
Dw83781d104 inputs can measure voltages between 0 and 4.08 volts, with a resolution
228 > programmable to be either thermistor or Pentium II diode inputs.
229 > How do I program them for diode inputs? I can't find any register
230 > to program these to be diode inputs.
Dvia686a74 in which case the sensor inputs will not be wired. This is the case of
Dsis559584 inputs can measure voltages between 0 and 4.08 volts, with a resolution of
Dsmm66550 inputs and an internal temperature sensor using a 10-bit ADC.
Dlm9341 inputs are not working, try changing this. The default value is "0".
56 tachometer inputs to measure fan speed. Limit and status registers for all
Dnct677546 direct temperature sensor inputs, the others are special sources such as PECI,
Dw83627ehf173 0x45b: only on EHF, bit 3, vin4 alarm (EHF supports 10 inputs, only 9 on DHG)
/linux-4.1.27/drivers/media/pci/saa7134/
Dsaa7134-cards.c70 .inputs = {{
85 .inputs = {{
115 .inputs = {{
164 .inputs = {{
206 .inputs = {{
236 .inputs = {{
286 .inputs = { {
335 .inputs = {{
365 .inputs = {{
391 .inputs = {{
[all …]
Dsaa7134.h386 struct saa7134_input inputs[SAA7134_INPUT_MAX]; member
415 #define card_in(dev,n) (saa7134_boards[dev->board].inputs[n])
Dsaa7134-go7007.c84 .inputs = {
/linux-4.1.27/Documentation/ioctl/
Dcdrom.txt103 inputs: none
117 inputs: none
132 inputs:
156 inputs:
177 inputs:
195 inputs:
220 inputs: none
238 inputs: none
257 inputs: none
276 inputs: none
[all …]
Dhdio.txt93 inputs: none
138 inputs: none
152 inputs:
173 inputs: none
189 inputs:
241 inputs: none
271 inputs: none
290 inputs:
310 inputs: none
328 inputs: none
[all …]
/linux-4.1.27/sound/pci/hda/
Dhda_auto_parser.c64 cfg->inputs[cfg->num_inputs].pin = nid; in add_auto_cfg_input_pin()
65 cfg->inputs[cfg->num_inputs].type = type; in add_auto_cfg_input_pin()
66 cfg->inputs[cfg->num_inputs].has_boost_on_pin = in add_auto_cfg_input_pin()
318 if (hsmic && can_be_headset_mic(codec, &cfg->inputs[i], 0xc)) { in snd_hda_parse_pin_defcfg()
319 cfg->inputs[i].is_headset_mic = 1; in snd_hda_parse_pin_defcfg()
321 } else if (hpmic && can_be_headset_mic(codec, &cfg->inputs[i], 0xd)) { in snd_hda_parse_pin_defcfg()
322 cfg->inputs[i].is_headphone_mic = 1; in snd_hda_parse_pin_defcfg()
328 if (!can_be_headset_mic(codec, &cfg->inputs[i], -1)) in snd_hda_parse_pin_defcfg()
331 cfg->inputs[i].is_headset_mic = 1; in snd_hda_parse_pin_defcfg()
334 cfg->inputs[i].is_headphone_mic = 1; in snd_hda_parse_pin_defcfg()
[all …]
Dhda_auto_parser.h74 struct auto_pin_cfg_item inputs[AUTO_CFG_MAX_INS]; member
Dhda_jack.c517 if (cfg->inputs[i].is_headphone_mic) { in snd_hda_jack_add_kctls()
522 err = add_jack_kctl(codec, cfg->inputs[i].pin, in snd_hda_jack_add_kctls()
525 err = add_jack_kctl(codec, cfg->inputs[i].pin, cfg, in snd_hda_jack_add_kctls()
Dhda_generic.c1464 if (cfg->inputs[i].type != type) in count_multiio_pins()
1467 cfg->inputs[i].pin)) in count_multiio_pins()
1504 hda_nid_t nid = cfg->inputs[i].pin; in fill_multi_ios()
1507 if (cfg->inputs[i].type != type) in fill_multi_ios()
2584 defcfg = snd_hda_codec_get_pincfg(codec, cfg->inputs[0].pin); in create_hp_mic()
2605 cfg->inputs[cfg->num_inputs].pin = nid; in create_hp_mic()
2606 cfg->inputs[cfg->num_inputs].type = AUTO_PIN_MIC; in create_hp_mic()
2607 cfg->inputs[cfg->num_inputs].is_headphone_mic = 1; in create_hp_mic()
3261 hda_nid_t pin = cfg->inputs[i].pin; in fill_input_pin_labels()
3307 pin = cfg->inputs[i].pin; in create_input_ctls()
[all …]
Dpatch_conexant.c300 if (cfg->inputs[i].pin == mux_pin) { in cxt_update_headset_mode()
301 mic_mode = !!cfg->inputs[i].is_headphone_mic; in cxt_update_headset_mode()
Dpatch_realtek.c4167 if (cfg->inputs[i].is_headset_mic && !spec->headset_mic_pin) in alc_probe_headset_mode()
4168 spec->headset_mic_pin = cfg->inputs[i].pin; in alc_probe_headset_mode()
4169 if (cfg->inputs[i].is_headphone_mic && !spec->headphone_mic_pin) in alc_probe_headset_mode()
4170 spec->headphone_mic_pin = cfg->inputs[i].pin; in alc_probe_headset_mode()
4411 if (cfg->inputs[i].type != AUTO_PIN_MIC) in find_ext_mic_pin()
4413 nid = cfg->inputs[i].pin; in find_ext_mic_pin()
4455 hda_nid_t nid = cfg->inputs[i].pin; in alc269_fixup_limit_int_mic_boost()
4457 if (cfg->inputs[i].type != AUTO_PIN_MIC) in alc269_fixup_limit_int_mic_boost()
/linux-4.1.27/Documentation/usb/
Dchipidea.txt27 echo 1 > /sys/bus/platform/devices/ci_hdrc.0/inputs/b_bus_req
31 echo 0 > /sys/bus/platform/devices/ci_hdrc.0/inputs/a_bus_req
37 echo 0 > /sys/bus/platform/devices/ci_hdrc.0/inputs/b_bus_req
49 echo 0 > /sys/bus/platform/devices/ci_hdrc.0/inputs/a_bus_drop
50 echo 1 > /sys/bus/platform/devices/ci_hdrc.0/inputs/a_bus_req
54 echo 1 > /sys/bus/platform/devices/ci_hdrc.0/inputs/b_bus_req
58 echo 1 > /sys/bus/platform/devices/ci_hdrc.0/inputs/a_bus_drop
64 echo 1 > /sys/bus/platform/devices/ci_hdrc.0/inputs/b_bus_req
/linux-4.1.27/arch/cris/arch-v32/mach-fs/
DKconfig97 as inputs, although floating inputs isn't good.
119 as inputs, although floating inputs isn't good.
141 as inputs, although floating inputs isn't good.
163 as inputs, although floating inputs isn't good.
185 as inputs, although floating inputs isn't good.
203 what to use, it is always safe to put all as inputs, although
204 floating inputs isn't good.
/linux-4.1.27/arch/cris/arch-v32/mach-a3/
DKconfig59 as inputs, although floating inputs isn't good.
79 as inputs, although floating inputs isn't good.
99 as inputs, although floating inputs isn't good.
/linux-4.1.27/Documentation/devicetree/bindings/gpio/
Dgpio-xilinx.txt19 - xlnx,all-inputs : if n-th bit is setup, GPIO-n is input
24 - xlnx,all-inputs-2 : as above but for the second channel
38 xlnx,all-inputs = <0x0>;
39 xlnx,all-inputs-2 = <0x0>;
Dgpio.txt76 GPIO controller that achieves (or represents, for inputs) a logically asserted
/linux-4.1.27/drivers/usb/phy/
Dphy-msm-usb.c1132 set_bit(ID, &motg->inputs); in msm_otg_init_sm()
1134 clear_bit(ID, &motg->inputs); in msm_otg_init_sm()
1137 set_bit(B_SESS_VLD, &motg->inputs); in msm_otg_init_sm()
1139 clear_bit(B_SESS_VLD, &motg->inputs); in msm_otg_init_sm()
1141 set_bit(ID, &motg->inputs); in msm_otg_init_sm()
1142 clear_bit(B_SESS_VLD, &motg->inputs); in msm_otg_init_sm()
1146 clear_bit(ID, &motg->inputs); in msm_otg_init_sm()
1149 set_bit(ID, &motg->inputs); in msm_otg_init_sm()
1151 set_bit(B_SESS_VLD, &motg->inputs); in msm_otg_init_sm()
1153 clear_bit(B_SESS_VLD, &motg->inputs); in msm_otg_init_sm()
[all …]
/linux-4.1.27/Documentation/ABI/testing/
Dsysfs-platform-chipidea-usb-otg1 What: /sys/bus/platform/devices/ci_hdrc.0/inputs/a_bus_req
18 What: /sys/bus/platform/devices/ci_hdrc.0/inputs/a_bus_drop
33 What: /sys/bus/platform/devices/ci_hdrc.0/inputs/b_bus_req
48 What: /sys/bus/platform/devices/ci_hdrc.0/inputs/a_clr_err
Dsysfs-class-regulator60 Note that regulator status is a function of many inputs,
61 not limited to control inputs from Linux. For example,
/linux-4.1.27/drivers/media/platform/blackfin/
Dbfin_capture.c281 if (bcap_dev->cfg->inputs[bcap_dev->cur_input].capabilities in bcap_start_streaming()
289 } else if (bcap_dev->cfg->inputs[bcap_dev->cur_input].capabilities in bcap_start_streaming()
433 input = bcap_dev->cfg->inputs[bcap_dev->cur_input]; in bcap_querystd()
445 input = bcap_dev->cfg->inputs[bcap_dev->cur_input]; in bcap_g_std()
459 input = bcap_dev->cfg->inputs[bcap_dev->cur_input]; in bcap_s_std()
480 input = bcap_dev->cfg->inputs[bcap_dev->cur_input]; in bcap_enum_dv_timings()
496 input = bcap_dev->cfg->inputs[bcap_dev->cur_input]; in bcap_query_dv_timings()
510 input = bcap_dev->cfg->inputs[bcap_dev->cur_input]; in bcap_g_dv_timings()
525 input = bcap_dev->cfg->inputs[bcap_dev->cur_input]; in bcap_s_dv_timings()
551 *input = config->inputs[input->index]; in bcap_enum_input()
[all …]
/linux-4.1.27/arch/cris/arch-v32/
DKconfig201 as inputs, although floating inputs isn't good.
223 as inputs, although floating inputs isn't good.
245 as inputs, although floating inputs isn't good.
267 as inputs, although floating inputs isn't good.
289 as inputs, although floating inputs isn't good.
/linux-4.1.27/drivers/hid/
Dhid-holtek-kbd.c131 struct hid_input *boot_hid_input = list_first_entry(&boot_hid->inputs, in holtek_kbd_input_event()
149 list_for_each_entry(hidinput, &hdev->inputs, list) { in holtek_kbd_probe()
Dhid-elo.c78 if (!(hdev->claimed & HID_CLAIMED_INPUT) || list_empty(&hdev->inputs)) in elo_raw_event()
81 hidinput = list_first_entry(&hdev->inputs, struct hid_input, list); in elo_raw_event()
Dhid-lg2ff.c65 struct hid_input *hidinput = list_entry(hid->inputs.next, in lg2ff_init()
Dhid-zpff.c69 struct hid_input *hidinput = list_entry(hid->inputs.next, in zpff_init()
Dhid-lg3ff.c132 struct hid_input *hidinput = list_entry(hid->inputs.next, struct hid_input, list); in lg3ff_init()
Dhid-betopff.c63 list_first_entry(&hid->inputs, struct hid_input, list); in betopff_init()
Dhid-emsff.c62 struct hid_input *hidinput = list_first_entry(&hid->inputs, in emsff_init()
Dhid-holtekff.c143 struct hid_input *hidinput = list_entry(hid->inputs.next, in holtekff_init()
Dhid-sjoy.c79 list_for_each_entry(hidinput, &hid->inputs, list) { in sjoyff_init()
Dhid-axff.c78 struct hid_input *hidinput = list_first_entry(&hid->inputs, struct hid_input, list); in axff_init()
Dhid-lgff.c130 struct hid_input *hidinput = list_entry(hid->inputs.next, struct hid_input, list); in lgff_init()
Dhid-gaff.c80 struct hid_input *hidinput = list_entry(hid->inputs.next, in gaff_init()
Dhid-dr.c90 struct hid_input *hidinput = list_first_entry(&hid->inputs, in drff_init()
Dhid-pl.c113 list_for_each_entry(hidinput, &hid->inputs, list) { in plff_init()
Dhid-tmff.c129 struct hid_input *hidinput = list_entry(hid->inputs.next, in tmff_init()
Dhid-input.c1179 list_for_each_entry(hidinput, &hid->inputs, list) in hidinput_report_event()
1380 list_add_tail(&hidinput->list, &hid->inputs); in hidinput_allocate()
1459 INIT_LIST_HEAD(&hid->inputs); in hidinput_connect()
1525 if (list_empty(&hid->inputs)) { in hidinput_connect()
1557 list_for_each_entry_safe(hidinput, next, &hid->inputs, list) { in hidinput_disconnect()
Dhid-sony.c965 struct hid_input *hidinput = list_entry(sc->hdev->inputs.next, in dualshock4_parse_report()
1665 struct hid_input *hidinput = list_entry(sc->hdev->inputs.next, in sony_init_ff()
Dhid-sensor-hub.c628 INIT_LIST_HEAD(&hdev->inputs); in sensor_hub_probe()
Dhid-lg4ff.c992 struct hid_input *hidinput = list_entry(hid->inputs.next, struct hid_input, list); in lg4ff_init()
/linux-4.1.27/drivers/media/platform/davinci/
Dvpif_capture.c647 subdev_name = chan_cfg->inputs[input_index].subdev_name; in vpif_input_to_subdev()
700 input = chan_cfg->inputs[index].input_route; in vpif_set_input()
701 output = chan_cfg->inputs[index].output_route; in vpif_set_input()
715 ch->video_dev.tvnorms = chan_cfg->inputs[index].input.std; in vpif_set_input()
764 if (config->chan_config[ch->channel_id].inputs == NULL) in vpif_g_std()
768 input = chan_cfg->inputs[ch->input_idx].input; in vpif_g_std()
794 if (config->chan_config[ch->channel_id].inputs == NULL) in vpif_s_std()
798 input = chan_cfg->inputs[ch->input_idx].input; in vpif_s_std()
844 memcpy(input, &chan_cfg->inputs[input->index].input, in vpif_enum_input()
1050 if (config->chan_config[ch->channel_id].inputs == NULL) in vpif_enum_dv_timings()
[all …]
Dvpfe_capture.c1093 memcpy(inp, &sdinfo->inputs[index], sizeof(struct v4l2_input)); in vpfe_enum_input()
1951 inps = &sdinfo->inputs[j]; in vpfe_probe()
/linux-4.1.27/arch/powerpc/boot/dts/
Dvirtex440-ml507.dts162 xlnx,all-inputs = <1>;
163 xlnx,all-inputs-2 = <0>;
301 xlnx,all-inputs = <0>;
302 xlnx,all-inputs-2 = <0>;
317 xlnx,all-inputs = <0>;
318 xlnx,all-inputs-2 = <0>;
335 xlnx,all-inputs = <1>;
336 xlnx,all-inputs-2 = <0>;
381 xlnx,num-intr-inputs = <0xc>;
Dvirtex440-ml510.dts271 xlnx,all-inputs = <0x0>;
272 xlnx,all-inputs-2 = <0x0>;
287 xlnx,all-inputs = <0x0>;
288 xlnx,all-inputs-2 = <0x0>;
449 xlnx,num-intr-inputs = <0xc>;
/linux-4.1.27/drivers/media/usb/go7007/
Dgo7007-usb.c98 .inputs = {
135 .inputs = {
174 .inputs = {
238 .inputs = {
296 .inputs = {
328 .inputs = {
359 .inputs = {
384 .inputs = {
416 .inputs = {
447 .inputs = {
[all …]
Dgo7007-priv.h114 } inputs[4]; member
Dgo7007-v4l2.c634 strncpy(inp->name, go->board_info->inputs[inp->index].name, in vidioc_enum_input()
708 go->board_info->inputs[input].video_input, 0, in go7007_s_input()
711 int aud_input = go->board_info->inputs[input].audio_index; in go7007_s_input()
/linux-4.1.27/Documentation/devicetree/bindings/hwmon/
Dads1015.txt3 This device is a 12-bit A-D converter with 4 inputs.
5 The inputs can be used single ended or in certain differential combinations.
/linux-4.1.27/arch/arm/mach-pxa/include/mach/
Didp.h193 #define KEYBD_MATRIX_GET_INPUTS(inputs) \ argument
195 inputs = (IDP_CPLD_KB_ROW & 0x7f);\
/linux-4.1.27/drivers/media/pci/zoran/
Dzoran_card.c381 .inputs = 3,
411 .inputs = 3,
440 .inputs = 3,
471 .inputs = 3,
502 .inputs = 3,
532 .inputs = 2,
561 .inputs = 2,
590 .inputs = 2,
621 .inputs = 10,
1021 if (default_input > zr->card.inputs-1) { in zr36057_init()
[all …]
Dzoran.h243 int inputs; /* number of video inputs */ member
/linux-4.1.27/Documentation/devicetree/bindings/video/
Dexynos_hdmi.txt19 c) sclk_pixel: Pixel special clock, one of the two possible inputs of
21 d) sclk_hdmiphy: HDMI PHY clock output, one of two possible inputs of
Dexynos_mixer.txt16 b) sclk_hdmi: HDMI Special clock, one of the two possible inputs of
/linux-4.1.27/Documentation/sound/alsa/
DSB-Live-mixer.txt148 *** inputs of the AC97 codec can be captured (recorded). ***
154 digital inputs (usually used by a CDROM drive). The result samples are
160 digital inputs (usually used by a CDROM drive). The result samples are
166 digital inputs (usually used by a CDROM drive). The result samples are
172 digital inputs (usually used by a CDROM drive). The result samples are
184 digital inputs. The result samples are forwarded to the ADC capture FIFO
190 digital inputs. The result samples are forwarded to the front DAC PCM slots
196 digital inputs. The result samples are forwarded to the ADC capture FIFO
203 inputs (on the LiveDrive). The result samples are forwarded to the front
210 inputs (on the LiveDrive). The result samples are forwarded to the ADC
Demu10k1-jack.txt35 The 16 input ports are connected to the 16 physical inputs. Contrary to
37 input channels have physical inputs connected to them depends on the card
46 still see 16 capture channels, but only 14 are available for recording inputs.
DAudigy-mixer.txt109 digital inputs (usually used by a CDROM drive). The result samples are
115 digital inputs (usually used by a CDROM drive). The result samples are
127 digital inputs. The result samples are forwarded to the ADC capture FIFO
133 inputs (on the AudigyDrive). The result samples are forwarded to the front
139 inputs (on the AudigyDrive). The result samples are forwarded to the ADC
145 inputs from Philips ADC. The result samples are forwarded to the front
152 inputs Philips ADC. The result samples are forwarded to the ADC
158 inputs (on the AudigyDrive). The result samples are forwarded to the front
164 inputs (on the AudigyDrive). The result samples are forwarded to the ADC
DMIXART.txt9 that has 4 stereo audio inputs and 4 stereo audio outputs.
11 4 digital stereo audio inputs and outputs.
DREADME.maya4433 - all inputs/outputs on the M/IO/DIO extension card
103 PCM devices correspond to inputs/outputs as follows (assuming Maya44 is card #0):
DBt87x.txt68 The chip has three analog inputs. Consequently you'll get a mixer
Dserial-u16550.txt88 inputs is specified by the ins parameter.
/linux-4.1.27/include/media/blackfin/
Dbfin_capture.h19 struct v4l2_input *inputs; member
/linux-4.1.27/drivers/media/platform/vsp1/
Dvsp1_bru.h36 } inputs[4]; member
Dvsp1_bru.c125 if (bru->inputs[i].rpf) { in bru_s_stream()
128 premultiplied = bru->inputs[i].rpf->video.format.flags in bru_s_stream()
240 return &bru->inputs[pad].compose; in bru_get_compose()
Dvsp1_video.c340 &bru->inputs[pad->index].compose; in vsp1_pipeline_validate_branch()
342 bru->inputs[pad->index].rpf = input; in vsp1_pipeline_validate_branch()
392 for (i = 0; i < ARRAY_SIZE(bru->inputs); ++i) in __vsp1_pipeline_cleanup()
393 bru->inputs[i].rpf = NULL; in __vsp1_pipeline_cleanup()
437 pipe->inputs[pipe->num_inputs++] = rwpf; in vsp1_pipeline_validate()
462 ret = vsp1_pipeline_validate_branch(pipe, pipe->inputs[i], in vsp1_pipeline_validate()
639 vsp1_video_frame_end(pipe, &pipe->inputs[i]->video); in vsp1_pipeline_frame_end()
800 sink->route->inputs[source->sink_pad]); in vsp1_entity_route_setup()
Dvsp1_entity.h52 unsigned int inputs[4]; member
Dvsp1_video.h78 struct vsp1_rwpf *inputs[VSP1_MAX_RPF]; member
Dvsp1_wpf.c101 struct vsp1_rwpf *input = pipe->inputs[i]; in wpf_s_stream()
/linux-4.1.27/Documentation/ptp/
Dptp.txt80 - 6 GPIOs programmable as inputs or outputs
82 used as general inputs or outputs
83 - GPIO inputs can time stamp external triggers
/linux-4.1.27/drivers/staging/media/davinci_vpfe/
Dvpfe.h56 struct v4l2_input *inputs; member
Dvpfe_video.c145 pipe->inputs[pipe->input_num++] = video; in vpfe_prepare_pipeline()
158 pipe->inputs[pipe->input_num++] = far_end; in vpfe_prepare_pipeline()
198 if (!pipe->inputs[i]->started || in vpfe_video_is_pipe_ready()
199 pipe->inputs[i]->state != VPFE_VIDEO_BUFFER_QUEUED) in vpfe_video_is_pipe_ready()
292 entity = &pipe->inputs[0]->video_dev.entity; in vpfe_pipeline_enable()
332 entity = &pipe->inputs[0]->video_dev.entity; in vpfe_pipeline_disable()
378 if (pipe->inputs[i]->started) in all_videos_stopped()
783 memcpy(inp, &sdinfo->inputs[inp->index], in vpfe_enum_input()
875 inps = &sdinfo->inputs[i]; in vpfe_s_input()
Dvpfe_video.h63 struct vpfe_video_device *inputs[10]; member
/linux-4.1.27/include/media/davinci/
Dvpif_types.h75 const struct vpif_input *inputs; member
Dvpfe_capture.h73 struct v4l2_input *inputs; member
/linux-4.1.27/Documentation/video4linux/
Dvivid.txt9 Up to 64 vivid instances can be created, each with up to 16 inputs and 16 outputs.
15 These inputs and outputs act exactly as a real hardware device would behave. This
84 device with webcam, TV, S-Video and HDMI inputs, a video output device with
88 The number of instances, devices, video inputs and outputs and their types are
112 num_inputs: the number of inputs, one for each instance. By default 4 inputs
113 are created for each video capture device. At most 16 inputs can be created,
117 what the type of each input is when the inputs are created for each driver
127 So to create a video capture device with 8 inputs where input 0 is a TV
128 tuner, inputs 1-3 are S-Video inputs and inputs 4-7 are HDMI inputs you
200 Note that this value is ignored by webcam inputs: those enumerate
[all …]
/linux-4.1.27/include/linux/usb/
Dmsm_hsusb.h152 unsigned long inputs; member
/linux-4.1.27/Documentation/devicetree/bindings/iio/
Diio-bindings.txt7 outputs to IIO inputs. Similar to the gpio specifiers, an IIO
71 This represents a device with two IIO inputs, named "vcc" and "vdd".
/linux-4.1.27/drivers/media/usb/em28xx/
Dem28xx-core.c334 static struct em28xx_vol_itable inputs[] = { variable
356 for (i = 0; i < ARRAY_SIZE(inputs); i++) { in set_ac97_input()
357 if (amux == inputs[i].mux) in set_ac97_input()
358 ret = em28xx_write_ac97(dev, inputs[i].reg, 0x0808); in set_ac97_input()
360 ret = em28xx_write_ac97(dev, inputs[i].reg, 0x8000); in set_ac97_input()
364 inputs[i].reg); in set_ac97_input()
/linux-4.1.27/drivers/media/i2c/
Dadv7170.c64 static char *inputs[] = { "pass_through", "play_back" }; variable
260 v4l2_dbg(1, debug, sd, "switched to %s\n", inputs[input]); in adv7170_s_routing()
Dadv7175.c61 static char *inputs[] = { "pass_through", "play_back", "color_bar" }; variable
298 v4l2_dbg(1, debug, sd, "switched to %s\n", inputs[input]); in adv7175_s_routing()
Dvpx3220.c65 static char *inputs[] = { "internal", "composite", "svideo" }; variable
400 v4l2_dbg(1, debug, sd, "input switched to %s\n", inputs[input]); in vpx3220_s_routing()
/linux-4.1.27/drivers/media/pci/ttpci/
DKconfig81 analog inputs or an onboard Common Interface connector.
116 tristate "Budget cards with analog video inputs"
131 MPEG2 decoder, but with one or more analog video inputs.
Dav7110_v4l.c96 static struct v4l2_input inputs[4] = { variable
474 memcpy(i, &inputs[i->index], sizeof(struct v4l2_input)); in vidioc_enum_input()
938 .inputs = 1,
953 .inputs = 1,
/linux-4.1.27/drivers/media/platform/vivid/
DKconfig14 the SDTV inputs. Also video output, VBI output, radio receivers,
/linux-4.1.27/Documentation/devicetree/bindings/mmc/
Darasan,sdhci.txt13 - clocks: From clock bindings: Handles to clock inputs.
/linux-4.1.27/Documentation/devicetree/bindings/clock/
Dti,cdce706.txt16 single-ended LVCMOS inputs configuration.
Dclock-bindings.txt7 outputs to clock inputs. Similar to the gpio specifiers, a clock
88 This represents a device with two clock inputs, named "baud" and "register".
Dzynq-7000.txt31 Clock inputs:
Dpistachio-clock.txt11 There are three external inputs to the clock controllers which should be
/linux-4.1.27/Documentation/devicetree/bindings/mfd/
Darizona.txt63 number of inputs, unspecified inputs will use the chip default.
Daxp20x.txt19 inputs are unregulated, such as using the IPSOUT output
Dtps65910.txt67 control through external inputs [0 (not enabled), 1 (EN1), 2 (EN2) or 4(EN3)]
/linux-4.1.27/Documentation/misc-devices/
Dics932s40124 The ICS932S401 monitors all inputs continuously. The driver will not read
/linux-4.1.27/Documentation/networking/
DPLIP.txt115 data bit outputs connected to status bit inputs.
128 status bit inputs of the second port (machine R). There are five
129 status inputs, and they are used as four data inputs and a clock (data
/linux-4.1.27/Documentation/devicetree/bindings/timer/
Darm,sp804.txt14 used for all clock inputs.
Drenesas,mtu2.txt4 clock inputs and programmable compare match.
Drenesas,tmu.txt3 The TMU is a 32-bit timer/counter with configurable clock inputs and
Drenesas,cmt.txt4 inputs and programmable compare match.
/linux-4.1.27/Documentation/devicetree/bindings/drm/imx/
Dhdmi.txt21 corresponding to the four inputs to the HDMI multiplexer.
Dldb.txt59 to the four LVDS multiplexer inputs.
/linux-4.1.27/Documentation/devicetree/bindings/net/can/
Drcar_can.txt11 - clocks: phandles and clock specifiers for 3 CAN clock inputs.
/linux-4.1.27/drivers/media/platform/am437x/
Dam437x-vpfe.h89 struct v4l2_input inputs[VPFE_MAX_INPUTS]; member
Dam437x-vpfe.c1750 *inp = sdinfo->inputs[index]; in vpfe_enum_input()
1844 if (!(sdinfo->inputs[0].capabilities & V4L2_IN_CAP_STD)) in vpfe_querystd()
1861 if (!(sdinfo->inputs[0].capabilities & V4L2_IN_CAP_STD)) in vpfe_s_std()
1890 if (sdinfo->inputs[0].capabilities != V4L2_IN_CAP_STD) in vpfe_g_std()
2329 vpfe->video_dev.tvnorms |= sdinfo->inputs[0].std; in vpfe_async_bound()
2466 sdinfo->inputs[0].index = i; in vpfe_get_pdata()
2467 strcpy(sdinfo->inputs[0].name, "Camera"); in vpfe_get_pdata()
2468 sdinfo->inputs[0].type = V4L2_INPUT_TYPE_CAMERA; in vpfe_get_pdata()
2469 sdinfo->inputs[0].std = V4L2_STD_ALL; in vpfe_get_pdata()
2470 sdinfo->inputs[0].capabilities = V4L2_IN_CAP_STD; in vpfe_get_pdata()
/linux-4.1.27/drivers/pps/
DKconfig19 inputs so you have to enable the corresponding client support.
/linux-4.1.27/Documentation/input/
Damijoy.txt70 loaded with the 4 quadrature inputs from each of two game
102 This allows these pins to double as joystick switch inputs.
Dxpad.txt165 18 inputs (8 axes, 10 buttons), and its values should change if you move
167 show 20 inputs (6 axes, 14 buttons).
/linux-4.1.27/Documentation/devicetree/bindings/clock/st/
Dst,clkgen-vcc.txt4 output clocks. Not all inputs or outputs have to be in use in a
/linux-4.1.27/Documentation/devicetree/bindings/media/i2c/
Dadv7604.txt4 receiver. The ADV7604 has four multiplexed HDMI inputs and one analog input,
/linux-4.1.27/Documentation/virtual/kvm/devices/
Dmpic.txt10 vcpu's interrupt inputs.
/linux-4.1.27/Documentation/devicetree/bindings/arm/samsung/
Dpmu.txt23 - clock-names : list of clock names for particular CLKOUT mux inputs in
/linux-4.1.27/drivers/gpu/drm/sti/
DNOTES8 has several inputs:
/linux-4.1.27/sound/soc/
Dsoc-dapm.c182 if (w->inputs == -1) in dapm_widget_invalidate_input_paths()
185 w->inputs = -1; in dapm_widget_invalidate_input_paths()
193 if (sink->inputs != -1) { in dapm_widget_invalidate_input_paths()
194 sink->inputs = -1; in dapm_widget_invalidate_input_paths()
266 if (p->source->inputs != 0) in dapm_path_invalidate()
1003 if (widget->inputs >= 0) in is_connected_input_ep()
1004 return widget->inputs; in is_connected_input_ep()
1009 widget->inputs = snd_soc_dapm_suspend_check(widget); in is_connected_input_ep()
1010 return widget->inputs; in is_connected_input_ep()
1046 widget->inputs = con; in is_connected_input_ep()
[all …]
/linux-4.1.27/arch/microblaze/boot/dts/
Dsystem.dts258 xlnx,all-inputs = <0x0>;
259 xlnx,all-inputs-2 = <0x0>;
350 xlnx,num-intr-inputs = <0x9>;
/linux-4.1.27/include/media/
Dsaa7146_vv.h153 int inputs; member
/linux-4.1.27/Documentation/arm/SA1100/
DGraphicsMaster30 - Smart I/O (ADC, keypad, digital inputs, etc)
DGraphicsClient73 - Smart I/O (ADC, keypad, digital inputs, etc)
/linux-4.1.27/Documentation/devicetree/bindings/input/touchscreen/
Dti-tsc-adc.txt28 ti,adc-channels: List of analog inputs available for ADC.
/linux-4.1.27/Documentation/devicetree/bindings/arm/omap/
Dcrossbar.txt7 inputs.
/linux-4.1.27/arch/arm/mach-davinci/
Dboard-dm646x-evm.c676 .inputs = dm6467_ch0_inputs,
686 .inputs = dm6467_ch1_inputs,
Dboard-dm355-evm.c224 .inputs = tvp5146_inputs,
Dboard-da850-evm.c1233 .inputs = da850_ch0_inputs,
1243 .inputs = da850_ch1_inputs,
Dboard-dm365-evm.c355 .inputs = tvp5146_inputs,
Dboard-dm644x-evm.c239 .inputs = dm644xevm_tvp5146_inputs,
/linux-4.1.27/Documentation/sound/alsa/soc/
Ddapm.txt28 2. Platform/Machine domain - physically connected inputs and outputs
54 o Mux - An analog switch that outputs only one of many inputs.
202 The WM8731 output mixer has 3 inputs (sources)
/linux-4.1.27/Documentation/video4linux/bttv/
DSound-FAQ73 The audiomux[] array holds the data values for the different inputs
121 video_inputs - # of video inputs the card has
DCards11 Composite/S-VHS inputs are supported. Teletext and Intercast support
14 Some cards with additional multiplexing of inputs or other additional
35 - 4 Composite inputs, 1 S-VHS input (shared with 4th composite)
/linux-4.1.27/Documentation/devicetree/bindings/metag/
Dpdc-intc.txt24 - num-syswakes: Number of SysWake inputs.
/linux-4.1.27/arch/cris/arch-v10/
DKconfig334 as inputs, although floating inputs isn't good.
363 inputs.
/linux-4.1.27/arch/arm/boot/dts/
Dkirkwood-nsa320.dts197 some of them should be configured as inputs.
Dstih407-clock.dtsi16 * Fixed 30MHz oscillator inputs to SoC
Dstih410-clock.dtsi18 * Fixed 30MHz oscillator inputs to SoC
Dstih418-clock.dtsi18 * Fixed 30MHz oscillator inputs to SoC
Domap4-panda-common.dtsi341 /* wl12xx GPIO inputs and SDIO pins */
Dtegra30-cardhu.dtsi44 /* AVDD_PEXA and VDD_PEXA inputs are grounded on Cardhu. */
Domap4-sdp.dts342 /* wl12xx GPIO inputs and SDIO pins */
Dstih416-clock.dtsi19 * Fixed 30MHz oscillator inputs to SoC
/linux-4.1.27/Documentation/devicetree/bindings/c6x/
Dinterrupt.txt34 combine up to 32 interrupt inputs into a single interrupt output which
/linux-4.1.27/drivers/staging/iio/Documentation/
Dsysfs-bus-iio-dds69 control inputs. In case the device in features independent
/linux-4.1.27/drivers/media/pci/saa7146/
Dhexium_orion.c460 .inputs = HEXIUM_INPUTS,
Dhexium_gemini.c389 .inputs = HEXIUM_INPUTS,
Dmxb.c837 .inputs = MXB_INPUTS,
/linux-4.1.27/Documentation/sound/oss/
DOpti131 connections to the mixer. The 3 inputs intended for cd, synth
132 and line-in are mapped to the generic inputs line1, line2 and
Dbtaudio62 The chip has three analog inputs. Consequently you'll get a mixer device
/linux-4.1.27/arch/blackfin/mach-bf561/boards/
Dezkit.c494 .inputs = adv7183_inputs,
/linux-4.1.27/arch/blackfin/mach-bf518/
DKconfig90 Port G and Port H and other processor signal inputs.
/linux-4.1.27/arch/blackfin/mach-bf527/
DKconfig87 Port G and Port H and other processor signal inputs.
/linux-4.1.27/Documentation/dvb/
Davermedia.txt76 The Avermedia DVB-T is a budget PCI DVB card. It has 3 inputs:
131 from the card (i.e. viewing the additional analogue inputs
/linux-4.1.27/drivers/media/pci/saa7164/
Dsaa7164-api.c439 u8 inputs[] = { 1, 2, 2, 2, 5, 5, 5 }; in saa7164_api_set_videomux() local
443 __func__, port->mux_input, inputs[port->mux_input - 1]); in saa7164_api_set_videomux()
459 &inputs[port->mux_input - 1]); in saa7164_api_set_videomux()
Dsaa7164-vbi.c229 char *inputs[] = { "tuner", "composite", "svideo", "aux", in vidioc_enum_input() local
235 strcpy(i->name, inputs[i->index]); in vidioc_enum_input()
Dsaa7164-encoder.c257 char *inputs[] = { "tuner", "composite", "svideo", "aux", in vidioc_enum_input() local
263 strcpy(i->name, inputs[i->index]); in vidioc_enum_input()
/linux-4.1.27/Documentation/devicetree/bindings/media/
Dsamsung-fimc.txt97 input ports. It includes camera A and camera B inputs. 'reg' property in the
/linux-4.1.27/arch/m68k/ifpsp060/
Dfplsp.doc121 with Signalling NAN inputs. Use of SNANs should be avoided with
/linux-4.1.27/Documentation/misc-devices/mei/
Dmei.txt106 inputs:
/linux-4.1.27/arch/blackfin/mach-bf609/boards/
Dezkit.c919 .inputs = vs6624_inputs,
1041 .inputs = adv7842_inputs,
/linux-4.1.27/drivers/gpio/
DKconfig619 GPIO expanders used for additional digital outputs or inputs.
963 This provides a GPIO interface supporting inputs and outputs.
971 This provides GPIO interface supporting inputs and outputs.
/linux-4.1.27/Documentation/fb/
Dintel810.txt268 5. Matt Sottek. His inputs and ideas helped in making some
/linux-4.1.27/Documentation/hid/
Dhid-sensor.txt198 Here there is a custom sensors with four fields, two feature and two inputs.
/linux-4.1.27/include/linux/
Dhid.h534 struct list_head inputs; /* The list of inputs */ member
/linux-4.1.27/include/sound/
Dsoc-dapm.h575 int inputs; member

12