1/* 2 * arch/arm/mach-ep93xx/include/mach/uncompress.h 3 * 4 * Copyright (C) 2006 Lennert Buytenhek <buytenh@wantstofly.org> 5 * 6 * This program is free software; you can redistribute it and/or modify 7 * it under the terms of the GNU General Public License as published by 8 * the Free Software Foundation; either version 2 of the License, or (at 9 * your option) any later version. 10 */ 11 12#include <mach/ep93xx-regs.h> 13 14static unsigned char __raw_readb(unsigned int ptr) 15{ 16 return *((volatile unsigned char *)ptr); 17} 18 19static unsigned int __raw_readl(unsigned int ptr) 20{ 21 return *((volatile unsigned int *)ptr); 22} 23 24static void __raw_writeb(unsigned char value, unsigned int ptr) 25{ 26 *((volatile unsigned char *)ptr) = value; 27} 28 29static void __raw_writel(unsigned int value, unsigned int ptr) 30{ 31 *((volatile unsigned int *)ptr) = value; 32} 33 34#define PHYS_UART_DATA (CONFIG_DEBUG_UART_PHYS + 0x00) 35#define PHYS_UART_FLAG (CONFIG_DEBUG_UART_PHYS + 0x18) 36#define UART_FLAG_TXFF 0x20 37 38static inline void putc(int c) 39{ 40 int i; 41 42 for (i = 0; i < 10000; i++) { 43 /* Transmit fifo not full? */ 44 if (!(__raw_readb(PHYS_UART_FLAG) & UART_FLAG_TXFF)) 45 break; 46 } 47 48 __raw_writeb(c, PHYS_UART_DATA); 49} 50 51static inline void flush(void) 52{ 53} 54 55 56/* 57 * Some bootloaders don't turn off DMA from the ethernet MAC before 58 * jumping to linux, which means that we might end up with bits of RX 59 * status and packet data scribbled over the uncompressed kernel image. 60 * Work around this by resetting the ethernet MAC before we uncompress. 61 */ 62#define PHYS_ETH_SELF_CTL 0x80010020 63#define ETH_SELF_CTL_RESET 0x00000001 64 65static void ethernet_reset(void) 66{ 67 unsigned int v; 68 69 /* Reset the ethernet MAC. */ 70 v = __raw_readl(PHYS_ETH_SELF_CTL); 71 __raw_writel(v | ETH_SELF_CTL_RESET, PHYS_ETH_SELF_CTL); 72 73 /* Wait for reset to finish. */ 74 while (__raw_readl(PHYS_ETH_SELF_CTL) & ETH_SELF_CTL_RESET) 75 ; 76} 77 78 79static void arch_decomp_setup(void) 80{ 81 ethernet_reset(); 82} 83