1/* 2 * linux/arch/mips/txx9/pci.c 3 * 4 * Based on linux/arch/mips/txx9/rbtx4927/setup.c, 5 * linux/arch/mips/txx9/rbtx4938/setup.c, 6 * and RBTX49xx patch from CELF patch archive. 7 * 8 * Copyright 2001-2005 MontaVista Software Inc. 9 * Copyright (C) 1996, 97, 2001, 04 Ralf Baechle (ralf@linux-mips.org) 10 * (C) Copyright TOSHIBA CORPORATION 2000-2001, 2004-2007 11 * 12 * This file is subject to the terms and conditions of the GNU General Public 13 * License. See the file "COPYING" in the main directory of this archive 14 * for more details. 15 */ 16#include <linux/delay.h> 17#include <linux/jiffies.h> 18#include <linux/io.h> 19#include <asm/txx9/generic.h> 20#include <asm/txx9/pci.h> 21#ifdef CONFIG_TOSHIBA_FPCIB0 22#include <linux/interrupt.h> 23#include <linux/slab.h> 24#include <asm/i8259.h> 25#include <asm/txx9/smsc_fdc37m81x.h> 26#endif 27 28static int __init 29early_read_config_word(struct pci_controller *hose, 30 int top_bus, int bus, int devfn, int offset, u16 *value) 31{ 32 struct pci_dev fake_dev; 33 struct pci_bus fake_bus; 34 35 fake_dev.bus = &fake_bus; 36 fake_dev.sysdata = hose; 37 fake_dev.devfn = devfn; 38 fake_bus.number = bus; 39 fake_bus.sysdata = hose; 40 fake_bus.ops = hose->pci_ops; 41 42 if (bus != top_bus) 43 /* Fake a parent bus structure. */ 44 fake_bus.parent = &fake_bus; 45 else 46 fake_bus.parent = NULL; 47 48 return pci_read_config_word(&fake_dev, offset, value); 49} 50 51int __init txx9_pci66_check(struct pci_controller *hose, int top_bus, 52 int current_bus) 53{ 54 u32 pci_devfn; 55 unsigned short vid; 56 int cap66 = -1; 57 u16 stat; 58 59 /* It seems SLC90E66 needs some time after PCI reset... */ 60 mdelay(80); 61 62 printk(KERN_INFO "PCI: Checking 66MHz capabilities...\n"); 63 64 for (pci_devfn = 0; pci_devfn < 0xff; pci_devfn++) { 65 if (PCI_FUNC(pci_devfn)) 66 continue; 67 if (early_read_config_word(hose, top_bus, current_bus, 68 pci_devfn, PCI_VENDOR_ID, &vid) != 69 PCIBIOS_SUCCESSFUL) 70 continue; 71 if (vid == 0xffff) 72 continue; 73 74 /* check 66MHz capability */ 75 if (cap66 < 0) 76 cap66 = 1; 77 if (cap66) { 78 early_read_config_word(hose, top_bus, current_bus, 79 pci_devfn, PCI_STATUS, &stat); 80 if (!(stat & PCI_STATUS_66MHZ)) { 81 printk(KERN_DEBUG 82 "PCI: %02x:%02x not 66MHz capable.\n", 83 current_bus, pci_devfn); 84 cap66 = 0; 85 break; 86 } 87 } 88 } 89 return cap66 > 0; 90} 91 92static struct resource primary_pci_mem_res[2] = { 93 { .name = "PCI MEM" }, 94 { .name = "PCI MMIO" }, 95}; 96static struct resource primary_pci_io_res = { .name = "PCI IO" }; 97struct pci_controller txx9_primary_pcic = { 98 .mem_resource = &primary_pci_mem_res[0], 99 .io_resource = &primary_pci_io_res, 100}; 101 102#ifdef CONFIG_64BIT 103int txx9_pci_mem_high __initdata = 1; 104#else 105int txx9_pci_mem_high __initdata; 106#endif 107 108/* 109 * allocate pci_controller and resources. 110 * mem_base, io_base: physical address. 0 for auto assignment. 111 * mem_size and io_size means max size on auto assignment. 112 * pcic must be &txx9_primary_pcic or NULL. 113 */ 114struct pci_controller *__init 115txx9_alloc_pci_controller(struct pci_controller *pcic, 116 unsigned long mem_base, unsigned long mem_size, 117 unsigned long io_base, unsigned long io_size) 118{ 119 struct pcic { 120 struct pci_controller c; 121 struct resource r_mem[2]; 122 struct resource r_io; 123 } *new = NULL; 124 int min_size = 0x10000; 125 126 if (!pcic) { 127 new = kzalloc(sizeof(*new), GFP_KERNEL); 128 if (!new) 129 return NULL; 130 new->r_mem[0].name = "PCI mem"; 131 new->r_mem[1].name = "PCI mmio"; 132 new->r_io.name = "PCI io"; 133 new->c.mem_resource = new->r_mem; 134 new->c.io_resource = &new->r_io; 135 pcic = &new->c; 136 } else 137 BUG_ON(pcic != &txx9_primary_pcic); 138 pcic->io_resource->flags = IORESOURCE_IO; 139 140 /* 141 * for auto assignment, first search a (big) region for PCI 142 * MEM, then search a region for PCI IO. 143 */ 144 if (mem_base) { 145 pcic->mem_resource[0].start = mem_base; 146 pcic->mem_resource[0].end = mem_base + mem_size - 1; 147 if (request_resource(&iomem_resource, &pcic->mem_resource[0])) 148 goto free_and_exit; 149 } else { 150 unsigned long min = 0, max = 0x20000000; /* low 512MB */ 151 if (!mem_size) { 152 /* default size for auto assignment */ 153 if (txx9_pci_mem_high) 154 mem_size = 0x20000000; /* mem:512M(max) */ 155 else 156 mem_size = 0x08000000; /* mem:128M(max) */ 157 } 158 if (txx9_pci_mem_high) { 159 min = 0x20000000; 160 max = 0xe0000000; 161 } 162 /* search free region for PCI MEM */ 163 for (; mem_size >= min_size; mem_size /= 2) { 164 if (allocate_resource(&iomem_resource, 165 &pcic->mem_resource[0], 166 mem_size, min, max, 167 mem_size, NULL, NULL) == 0) 168 break; 169 } 170 if (mem_size < min_size) 171 goto free_and_exit; 172 } 173 174 pcic->mem_resource[1].flags = IORESOURCE_MEM | IORESOURCE_BUSY; 175 if (io_base) { 176 pcic->mem_resource[1].start = io_base; 177 pcic->mem_resource[1].end = io_base + io_size - 1; 178 if (request_resource(&iomem_resource, &pcic->mem_resource[1])) 179 goto release_and_exit; 180 } else { 181 if (!io_size) 182 /* default size for auto assignment */ 183 io_size = 0x01000000; /* io:16M(max) */ 184 /* search free region for PCI IO in low 512MB */ 185 for (; io_size >= min_size; io_size /= 2) { 186 if (allocate_resource(&iomem_resource, 187 &pcic->mem_resource[1], 188 io_size, 0, 0x20000000, 189 io_size, NULL, NULL) == 0) 190 break; 191 } 192 if (io_size < min_size) 193 goto release_and_exit; 194 io_base = pcic->mem_resource[1].start; 195 } 196 197 pcic->mem_resource[0].flags = IORESOURCE_MEM; 198 if (pcic == &txx9_primary_pcic && 199 mips_io_port_base == (unsigned long)-1) { 200 /* map ioport 0 to PCI I/O space address 0 */ 201 set_io_port_base(IO_BASE + pcic->mem_resource[1].start); 202 pcic->io_resource->start = 0; 203 pcic->io_offset = 0; /* busaddr == ioaddr */ 204 pcic->io_map_base = IO_BASE + pcic->mem_resource[1].start; 205 } else { 206 /* physaddr to ioaddr */ 207 pcic->io_resource->start = 208 io_base - (mips_io_port_base - IO_BASE); 209 pcic->io_offset = io_base - (mips_io_port_base - IO_BASE); 210 pcic->io_map_base = mips_io_port_base; 211 } 212 pcic->io_resource->end = pcic->io_resource->start + io_size - 1; 213 214 pcic->mem_offset = 0; /* busaddr == physaddr */ 215 216 printk(KERN_INFO "PCI: IO %pR MEM %pR\n", 217 &pcic->mem_resource[1], &pcic->mem_resource[0]); 218 219 /* register_pci_controller() will request MEM resource */ 220 release_resource(&pcic->mem_resource[0]); 221 return pcic; 222 release_and_exit: 223 release_resource(&pcic->mem_resource[0]); 224 free_and_exit: 225 kfree(new); 226 printk(KERN_ERR "PCI: Failed to allocate resources.\n"); 227 return NULL; 228} 229 230static int __init 231txx9_arch_pci_init(void) 232{ 233 PCIBIOS_MIN_IO = 0x8000; /* reseve legacy I/O space */ 234 return 0; 235} 236arch_initcall(txx9_arch_pci_init); 237 238/* IRQ/IDSEL mapping */ 239int txx9_pci_option = 240#ifdef CONFIG_PICMG_PCI_BACKPLANE_DEFAULT 241 TXX9_PCI_OPT_PICMG | 242#endif 243 TXX9_PCI_OPT_CLK_AUTO; 244 245enum txx9_pci_err_action txx9_pci_err_action = TXX9_PCI_ERR_REPORT; 246 247#ifdef CONFIG_TOSHIBA_FPCIB0 248static irqreturn_t i8259_interrupt(int irq, void *dev_id) 249{ 250 int isairq; 251 252 isairq = i8259_irq(); 253 if (unlikely(isairq <= I8259A_IRQ_BASE)) 254 return IRQ_NONE; 255 generic_handle_irq(isairq); 256 return IRQ_HANDLED; 257} 258 259static int txx9_i8259_irq_setup(int irq) 260{ 261 int err; 262 263 init_i8259_irqs(); 264 err = request_irq(irq, &i8259_interrupt, IRQF_SHARED, 265 "cascade(i8259)", (void *)(long)irq); 266 if (!err) 267 printk(KERN_INFO "PCI-ISA bridge PIC (irq %d)\n", irq); 268 return err; 269} 270 271static void __init_refok quirk_slc90e66_bridge(struct pci_dev *dev) 272{ 273 int irq; /* PCI/ISA Bridge interrupt */ 274 u8 reg_64; 275 u32 reg_b0; 276 u8 reg_e1; 277 irq = pcibios_map_irq(dev, PCI_SLOT(dev->devfn), 1); /* INTA */ 278 if (!irq) 279 return; 280 txx9_i8259_irq_setup(irq); 281 pci_read_config_byte(dev, 0x64, ®_64); 282 pci_read_config_dword(dev, 0xb0, ®_b0); 283 pci_read_config_byte(dev, 0xe1, ®_e1); 284 /* serial irq control */ 285 reg_64 = 0xd0; 286 /* serial irq pin */ 287 reg_b0 |= 0x00010000; 288 /* ide irq on isa14 */ 289 reg_e1 &= 0xf0; 290 reg_e1 |= 0x0d; 291 pci_write_config_byte(dev, 0x64, reg_64); 292 pci_write_config_dword(dev, 0xb0, reg_b0); 293 pci_write_config_byte(dev, 0xe1, reg_e1); 294 295 smsc_fdc37m81x_init(0x3f0); 296 smsc_fdc37m81x_config_beg(); 297 smsc_fdc37m81x_config_set(SMSC_FDC37M81X_DNUM, 298 SMSC_FDC37M81X_KBD); 299 smsc_fdc37m81x_config_set(SMSC_FDC37M81X_INT, 1); 300 smsc_fdc37m81x_config_set(SMSC_FDC37M81X_INT2, 12); 301 smsc_fdc37m81x_config_set(SMSC_FDC37M81X_ACTIVE, 302 1); 303 smsc_fdc37m81x_config_end(); 304} 305 306static void quirk_slc90e66_ide(struct pci_dev *dev) 307{ 308 unsigned char dat; 309 int regs[2] = {0x41, 0x43}; 310 int i; 311 312 /* SMSC SLC90E66 IDE uses irq 14, 15 (default) */ 313 pci_write_config_byte(dev, PCI_INTERRUPT_LINE, 14); 314 pci_read_config_byte(dev, PCI_INTERRUPT_LINE, &dat); 315 printk(KERN_INFO "PCI: %s: IRQ %02x", pci_name(dev), dat); 316 /* enable SMSC SLC90E66 IDE */ 317 for (i = 0; i < ARRAY_SIZE(regs); i++) { 318 pci_read_config_byte(dev, regs[i], &dat); 319 pci_write_config_byte(dev, regs[i], dat | 0x80); 320 pci_read_config_byte(dev, regs[i], &dat); 321 printk(KERN_CONT " IDETIM%d %02x", i, dat); 322 } 323 pci_read_config_byte(dev, 0x5c, &dat); 324 /* 325 * !!! DO NOT REMOVE THIS COMMENT IT IS REQUIRED BY SMSC !!! 326 * 327 * This line of code is intended to provide the user with a work 328 * around solution to the anomalies cited in SMSC's anomaly sheet 329 * entitled, "SLC90E66 Functional Rev.J_0.1 Anomalies"". 330 * 331 * !!! DO NOT REMOVE THIS COMMENT IT IS REQUIRED BY SMSC !!! 332 */ 333 dat |= 0x01; 334 pci_write_config_byte(dev, 0x5c, dat); 335 pci_read_config_byte(dev, 0x5c, &dat); 336 printk(KERN_CONT " REG5C %02x", dat); 337 printk(KERN_CONT "\n"); 338} 339#endif /* CONFIG_TOSHIBA_FPCIB0 */ 340 341static void tc35815_fixup(struct pci_dev *dev) 342{ 343 /* This device may have PM registers but not they are not supported. */ 344 if (dev->pm_cap) { 345 dev_info(&dev->dev, "PM disabled\n"); 346 dev->pm_cap = 0; 347 } 348} 349 350static void final_fixup(struct pci_dev *dev) 351{ 352 unsigned char bist; 353 354 /* Do build-in self test */ 355 if (pci_read_config_byte(dev, PCI_BIST, &bist) == PCIBIOS_SUCCESSFUL && 356 (bist & PCI_BIST_CAPABLE)) { 357 unsigned long timeout; 358 pci_set_power_state(dev, PCI_D0); 359 printk(KERN_INFO "PCI: %s BIST...", pci_name(dev)); 360 pci_write_config_byte(dev, PCI_BIST, PCI_BIST_START); 361 timeout = jiffies + HZ * 2; /* timeout after 2 sec */ 362 do { 363 pci_read_config_byte(dev, PCI_BIST, &bist); 364 if (time_after(jiffies, timeout)) 365 break; 366 } while (bist & PCI_BIST_START); 367 if (bist & (PCI_BIST_CODE_MASK | PCI_BIST_START)) 368 printk(KERN_CONT "failed. (0x%x)\n", bist); 369 else 370 printk(KERN_CONT "OK.\n"); 371 } 372} 373 374#ifdef CONFIG_TOSHIBA_FPCIB0 375#define PCI_DEVICE_ID_EFAR_SLC90E66_0 0x9460 376DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_EFAR, PCI_DEVICE_ID_EFAR_SLC90E66_0, 377 quirk_slc90e66_bridge); 378DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_EFAR, PCI_DEVICE_ID_EFAR_SLC90E66_1, 379 quirk_slc90e66_ide); 380DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_EFAR, PCI_DEVICE_ID_EFAR_SLC90E66_1, 381 quirk_slc90e66_ide); 382#endif 383DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_TOSHIBA_2, 384 PCI_DEVICE_ID_TOSHIBA_TC35815_NWU, tc35815_fixup); 385DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_TOSHIBA_2, 386 PCI_DEVICE_ID_TOSHIBA_TC35815_TX4939, tc35815_fixup); 387DECLARE_PCI_FIXUP_FINAL(PCI_ANY_ID, PCI_ANY_ID, final_fixup); 388DECLARE_PCI_FIXUP_RESUME(PCI_ANY_ID, PCI_ANY_ID, final_fixup); 389 390int pcibios_plat_dev_init(struct pci_dev *dev) 391{ 392 return 0; 393} 394 395int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) 396{ 397 return txx9_board_vec->pci_map_irq(dev, slot, pin); 398} 399 400char * (*txx9_board_pcibios_setup)(char *str) __initdata; 401 402char *__init txx9_pcibios_setup(char *str) 403{ 404 if (txx9_board_pcibios_setup && !txx9_board_pcibios_setup(str)) 405 return NULL; 406 if (!strcmp(str, "picmg")) { 407 /* PICMG compliant backplane (TOSHIBA JMB-PICMG-ATX 408 (5V or 3.3V), JMB-PICMG-L2 (5V only), etc.) */ 409 txx9_pci_option |= TXX9_PCI_OPT_PICMG; 410 return NULL; 411 } else if (!strcmp(str, "nopicmg")) { 412 /* non-PICMG compliant backplane (TOSHIBA 413 RBHBK4100,RBHBK4200, Interface PCM-PCM05, etc.) */ 414 txx9_pci_option &= ~TXX9_PCI_OPT_PICMG; 415 return NULL; 416 } else if (!strncmp(str, "clk=", 4)) { 417 char *val = str + 4; 418 txx9_pci_option &= ~TXX9_PCI_OPT_CLK_MASK; 419 if (strcmp(val, "33") == 0) 420 txx9_pci_option |= TXX9_PCI_OPT_CLK_33; 421 else if (strcmp(val, "66") == 0) 422 txx9_pci_option |= TXX9_PCI_OPT_CLK_66; 423 else /* "auto" */ 424 txx9_pci_option |= TXX9_PCI_OPT_CLK_AUTO; 425 return NULL; 426 } else if (!strncmp(str, "err=", 4)) { 427 if (!strcmp(str + 4, "panic")) 428 txx9_pci_err_action = TXX9_PCI_ERR_PANIC; 429 else if (!strcmp(str + 4, "ignore")) 430 txx9_pci_err_action = TXX9_PCI_ERR_IGNORE; 431 return NULL; 432 } 433 return str; 434} 435