1/* 2 * Exceptions for specific devices. Usually work-arounds for fatal design flaws. 3 */ 4 5#include <linux/delay.h> 6#include <linux/dmi.h> 7#include <linux/pci.h> 8#include <linux/vgaarb.h> 9#include <asm/hpet.h> 10#include <asm/pci_x86.h> 11 12static void pci_fixup_i450nx(struct pci_dev *d) 13{ 14 /* 15 * i450NX -- Find and scan all secondary buses on all PXB's. 16 */ 17 int pxb, reg; 18 u8 busno, suba, subb; 19 20 dev_warn(&d->dev, "Searching for i450NX host bridges\n"); 21 reg = 0xd0; 22 for(pxb = 0; pxb < 2; pxb++) { 23 pci_read_config_byte(d, reg++, &busno); 24 pci_read_config_byte(d, reg++, &suba); 25 pci_read_config_byte(d, reg++, &subb); 26 dev_dbg(&d->dev, "i450NX PXB %d: %02x/%02x/%02x\n", pxb, busno, 27 suba, subb); 28 if (busno) 29 pcibios_scan_root(busno); /* Bus A */ 30 if (suba < subb) 31 pcibios_scan_root(suba+1); /* Bus B */ 32 } 33 pcibios_last_bus = -1; 34} 35DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82451NX, pci_fixup_i450nx); 36 37static void pci_fixup_i450gx(struct pci_dev *d) 38{ 39 /* 40 * i450GX and i450KX -- Find and scan all secondary buses. 41 * (called separately for each PCI bridge found) 42 */ 43 u8 busno; 44 pci_read_config_byte(d, 0x4a, &busno); 45 dev_info(&d->dev, "i440KX/GX host bridge; secondary bus %02x\n", busno); 46 pcibios_scan_root(busno); 47 pcibios_last_bus = -1; 48} 49DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82454GX, pci_fixup_i450gx); 50 51static void pci_fixup_umc_ide(struct pci_dev *d) 52{ 53 /* 54 * UM8886BF IDE controller sets region type bits incorrectly, 55 * therefore they look like memory despite of them being I/O. 56 */ 57 int i; 58 59 dev_warn(&d->dev, "Fixing base address flags\n"); 60 for(i = 0; i < 4; i++) 61 d->resource[i].flags |= PCI_BASE_ADDRESS_SPACE_IO; 62} 63DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_UMC, PCI_DEVICE_ID_UMC_UM8886BF, pci_fixup_umc_ide); 64 65static void pci_fixup_ncr53c810(struct pci_dev *d) 66{ 67 /* 68 * NCR 53C810 returns class code 0 (at least on some systems). 69 * Fix class to be PCI_CLASS_STORAGE_SCSI 70 */ 71 if (!d->class) { 72 dev_warn(&d->dev, "Fixing NCR 53C810 class code\n"); 73 d->class = PCI_CLASS_STORAGE_SCSI << 8; 74 } 75} 76DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_NCR, PCI_DEVICE_ID_NCR_53C810, pci_fixup_ncr53c810); 77 78static void pci_fixup_latency(struct pci_dev *d) 79{ 80 /* 81 * SiS 5597 and 5598 chipsets require latency timer set to 82 * at most 32 to avoid lockups. 83 */ 84 dev_dbg(&d->dev, "Setting max latency to 32\n"); 85 pcibios_max_latency = 32; 86} 87DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_5597, pci_fixup_latency); 88DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_5598, pci_fixup_latency); 89 90static void pci_fixup_piix4_acpi(struct pci_dev *d) 91{ 92 /* 93 * PIIX4 ACPI device: hardwired IRQ9 94 */ 95 d->irq = 9; 96} 97DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82371AB_3, pci_fixup_piix4_acpi); 98 99/* 100 * Addresses issues with problems in the memory write queue timer in 101 * certain VIA Northbridges. This bugfix is per VIA's specifications, 102 * except for the KL133/KM133: clearing bit 5 on those Northbridges seems 103 * to trigger a bug in its integrated ProSavage video card, which 104 * causes screen corruption. We only clear bits 6 and 7 for that chipset, 105 * until VIA can provide us with definitive information on why screen 106 * corruption occurs, and what exactly those bits do. 107 * 108 * VIA 8363,8622,8361 Northbridges: 109 * - bits 5, 6, 7 at offset 0x55 need to be turned off 110 * VIA 8367 (KT266x) Northbridges: 111 * - bits 5, 6, 7 at offset 0x95 need to be turned off 112 * VIA 8363 rev 0x81/0x84 (KL133/KM133) Northbridges: 113 * - bits 6, 7 at offset 0x55 need to be turned off 114 */ 115 116#define VIA_8363_KL133_REVISION_ID 0x81 117#define VIA_8363_KM133_REVISION_ID 0x84 118 119static void pci_fixup_via_northbridge_bug(struct pci_dev *d) 120{ 121 u8 v; 122 int where = 0x55; 123 int mask = 0x1f; /* clear bits 5, 6, 7 by default */ 124 125 if (d->device == PCI_DEVICE_ID_VIA_8367_0) { 126 /* fix pci bus latency issues resulted by NB bios error 127 it appears on bug free^Wreduced kt266x's bios forces 128 NB latency to zero */ 129 pci_write_config_byte(d, PCI_LATENCY_TIMER, 0); 130 131 where = 0x95; /* the memory write queue timer register is 132 different for the KT266x's: 0x95 not 0x55 */ 133 } else if (d->device == PCI_DEVICE_ID_VIA_8363_0 && 134 (d->revision == VIA_8363_KL133_REVISION_ID || 135 d->revision == VIA_8363_KM133_REVISION_ID)) { 136 mask = 0x3f; /* clear only bits 6 and 7; clearing bit 5 137 causes screen corruption on the KL133/KM133 */ 138 } 139 140 pci_read_config_byte(d, where, &v); 141 if (v & ~mask) { 142 dev_warn(&d->dev, "Disabling VIA memory write queue (PCI ID %04x, rev %02x): [%02x] %02x & %02x -> %02x\n", \ 143 d->device, d->revision, where, v, mask, v & mask); 144 v &= mask; 145 pci_write_config_byte(d, where, v); 146 } 147} 148DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8363_0, pci_fixup_via_northbridge_bug); 149DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8622, pci_fixup_via_northbridge_bug); 150DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8361, pci_fixup_via_northbridge_bug); 151DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8367_0, pci_fixup_via_northbridge_bug); 152DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8363_0, pci_fixup_via_northbridge_bug); 153DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8622, pci_fixup_via_northbridge_bug); 154DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8361, pci_fixup_via_northbridge_bug); 155DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8367_0, pci_fixup_via_northbridge_bug); 156 157/* 158 * For some reasons Intel decided that certain parts of their 159 * 815, 845 and some other chipsets must look like PCI-to-PCI bridges 160 * while they are obviously not. The 82801 family (AA, AB, BAM/CAM, 161 * BA/CA/DB and E) PCI bridges are actually HUB-to-PCI ones, according 162 * to Intel terminology. These devices do forward all addresses from 163 * system to PCI bus no matter what are their window settings, so they are 164 * "transparent" (or subtractive decoding) from programmers point of view. 165 */ 166static void pci_fixup_transparent_bridge(struct pci_dev *dev) 167{ 168 if ((dev->device & 0xff00) == 0x2400) 169 dev->transparent = 1; 170} 171DECLARE_PCI_FIXUP_CLASS_HEADER(PCI_VENDOR_ID_INTEL, PCI_ANY_ID, 172 PCI_CLASS_BRIDGE_PCI, 8, pci_fixup_transparent_bridge); 173 174/* 175 * Fixup for C1 Halt Disconnect problem on nForce2 systems. 176 * 177 * From information provided by "Allen Martin" <AMartin@nvidia.com>: 178 * 179 * A hang is caused when the CPU generates a very fast CONNECT/HALT cycle 180 * sequence. Workaround is to set the SYSTEM_IDLE_TIMEOUT to 80 ns. 181 * This allows the state-machine and timer to return to a proper state within 182 * 80 ns of the CONNECT and probe appearing together. Since the CPU will not 183 * issue another HALT within 80 ns of the initial HALT, the failure condition 184 * is avoided. 185 */ 186static void pci_fixup_nforce2(struct pci_dev *dev) 187{ 188 u32 val; 189 190 /* 191 * Chip Old value New value 192 * C17 0x1F0FFF01 0x1F01FF01 193 * C18D 0x9F0FFF01 0x9F01FF01 194 * 195 * Northbridge chip version may be determined by 196 * reading the PCI revision ID (0xC1 or greater is C18D). 197 */ 198 pci_read_config_dword(dev, 0x6c, &val); 199 200 /* 201 * Apply fixup if needed, but don't touch disconnect state 202 */ 203 if ((val & 0x00FF0000) != 0x00010000) { 204 dev_warn(&dev->dev, "nForce2 C1 Halt Disconnect fixup\n"); 205 pci_write_config_dword(dev, 0x6c, (val & 0xFF00FFFF) | 0x00010000); 206 } 207} 208DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE2, pci_fixup_nforce2); 209DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE2, pci_fixup_nforce2); 210 211/* Max PCI Express root ports */ 212#define MAX_PCIEROOT 6 213static int quirk_aspm_offset[MAX_PCIEROOT << 3]; 214 215#define GET_INDEX(a, b) ((((a) - PCI_DEVICE_ID_INTEL_MCH_PA) << 3) + ((b) & 7)) 216 217static int quirk_pcie_aspm_read(struct pci_bus *bus, unsigned int devfn, int where, int size, u32 *value) 218{ 219 return raw_pci_read(pci_domain_nr(bus), bus->number, 220 devfn, where, size, value); 221} 222 223/* 224 * Replace the original pci bus ops for write with a new one that will filter 225 * the request to insure ASPM cannot be enabled. 226 */ 227static int quirk_pcie_aspm_write(struct pci_bus *bus, unsigned int devfn, int where, int size, u32 value) 228{ 229 u8 offset; 230 231 offset = quirk_aspm_offset[GET_INDEX(bus->self->device, devfn)]; 232 233 if ((offset) && (where == offset)) 234 value = value & ~PCI_EXP_LNKCTL_ASPMC; 235 236 return raw_pci_write(pci_domain_nr(bus), bus->number, 237 devfn, where, size, value); 238} 239 240static struct pci_ops quirk_pcie_aspm_ops = { 241 .read = quirk_pcie_aspm_read, 242 .write = quirk_pcie_aspm_write, 243}; 244 245/* 246 * Prevents PCI Express ASPM (Active State Power Management) being enabled. 247 * 248 * Save the register offset, where the ASPM control bits are located, 249 * for each PCI Express device that is in the device list of 250 * the root port in an array for fast indexing. Replace the bus ops 251 * with the modified one. 252 */ 253static void pcie_rootport_aspm_quirk(struct pci_dev *pdev) 254{ 255 int i; 256 struct pci_bus *pbus; 257 struct pci_dev *dev; 258 259 if ((pbus = pdev->subordinate) == NULL) 260 return; 261 262 /* 263 * Check if the DID of pdev matches one of the six root ports. This 264 * check is needed in the case this function is called directly by the 265 * hot-plug driver. 266 */ 267 if ((pdev->device < PCI_DEVICE_ID_INTEL_MCH_PA) || 268 (pdev->device > PCI_DEVICE_ID_INTEL_MCH_PC1)) 269 return; 270 271 if (list_empty(&pbus->devices)) { 272 /* 273 * If no device is attached to the root port at power-up or 274 * after hot-remove, the pbus->devices is empty and this code 275 * will set the offsets to zero and the bus ops to parent's bus 276 * ops, which is unmodified. 277 */ 278 for (i = GET_INDEX(pdev->device, 0); i <= GET_INDEX(pdev->device, 7); ++i) 279 quirk_aspm_offset[i] = 0; 280 281 pci_bus_set_ops(pbus, pbus->parent->ops); 282 } else { 283 /* 284 * If devices are attached to the root port at power-up or 285 * after hot-add, the code loops through the device list of 286 * each root port to save the register offsets and replace the 287 * bus ops. 288 */ 289 list_for_each_entry(dev, &pbus->devices, bus_list) 290 /* There are 0 to 8 devices attached to this bus */ 291 quirk_aspm_offset[GET_INDEX(pdev->device, dev->devfn)] = 292 dev->pcie_cap + PCI_EXP_LNKCTL; 293 294 pci_bus_set_ops(pbus, &quirk_pcie_aspm_ops); 295 dev_info(&pbus->dev, "writes to ASPM control bits will be ignored\n"); 296 } 297 298} 299DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_MCH_PA, pcie_rootport_aspm_quirk); 300DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_MCH_PA1, pcie_rootport_aspm_quirk); 301DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_MCH_PB, pcie_rootport_aspm_quirk); 302DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_MCH_PB1, pcie_rootport_aspm_quirk); 303DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_MCH_PC, pcie_rootport_aspm_quirk); 304DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_MCH_PC1, pcie_rootport_aspm_quirk); 305 306/* 307 * Fixup to mark boot BIOS video selected by BIOS before it changes 308 * 309 * From information provided by "Jon Smirl" <jonsmirl@gmail.com> 310 * 311 * The standard boot ROM sequence for an x86 machine uses the BIOS 312 * to select an initial video card for boot display. This boot video 313 * card will have it's BIOS copied to C0000 in system RAM. 314 * IORESOURCE_ROM_SHADOW is used to associate the boot video 315 * card with this copy. On laptops this copy has to be used since 316 * the main ROM may be compressed or combined with another image. 317 * See pci_map_rom() for use of this flag. Before marking the device 318 * with IORESOURCE_ROM_SHADOW check if a vga_default_device is already set 319 * by either arch cde or vga-arbitration, if so only apply the fixup to this 320 * already determined primary video card. 321 */ 322 323static void pci_fixup_video(struct pci_dev *pdev) 324{ 325 struct pci_dev *bridge; 326 struct pci_bus *bus; 327 u16 config; 328 329 /* Is VGA routed to us? */ 330 bus = pdev->bus; 331 while (bus) { 332 bridge = bus->self; 333 334 /* 335 * From information provided by 336 * "David Miller" <davem@davemloft.net> 337 * The bridge control register is valid for PCI header 338 * type BRIDGE, or CARDBUS. Host to PCI controllers use 339 * PCI header type NORMAL. 340 */ 341 if (bridge && (pci_is_bridge(bridge))) { 342 pci_read_config_word(bridge, PCI_BRIDGE_CONTROL, 343 &config); 344 if (!(config & PCI_BRIDGE_CTL_VGA)) 345 return; 346 } 347 bus = bus->parent; 348 } 349 if (!vga_default_device() || pdev == vga_default_device()) { 350 pci_read_config_word(pdev, PCI_COMMAND, &config); 351 if (config & (PCI_COMMAND_IO | PCI_COMMAND_MEMORY)) { 352 pdev->resource[PCI_ROM_RESOURCE].flags |= IORESOURCE_ROM_SHADOW; 353 dev_printk(KERN_DEBUG, &pdev->dev, "Video device with shadowed ROM\n"); 354 } 355 } 356} 357DECLARE_PCI_FIXUP_CLASS_FINAL(PCI_ANY_ID, PCI_ANY_ID, 358 PCI_CLASS_DISPLAY_VGA, 8, pci_fixup_video); 359 360 361static const struct dmi_system_id msi_k8t_dmi_table[] = { 362 { 363 .ident = "MSI-K8T-Neo2Fir", 364 .matches = { 365 DMI_MATCH(DMI_SYS_VENDOR, "MSI"), 366 DMI_MATCH(DMI_PRODUCT_NAME, "MS-6702E"), 367 }, 368 }, 369 {} 370}; 371 372/* 373 * The AMD-Athlon64 board MSI "K8T Neo2-FIR" disables the onboard sound 374 * card if a PCI-soundcard is added. 375 * 376 * The BIOS only gives options "DISABLED" and "AUTO". This code sets 377 * the corresponding register-value to enable the soundcard. 378 * 379 * The soundcard is only enabled, if the mainborad is identified 380 * via DMI-tables and the soundcard is detected to be off. 381 */ 382static void pci_fixup_msi_k8t_onboard_sound(struct pci_dev *dev) 383{ 384 unsigned char val; 385 if (!dmi_check_system(msi_k8t_dmi_table)) 386 return; /* only applies to MSI K8T Neo2-FIR */ 387 388 pci_read_config_byte(dev, 0x50, &val); 389 if (val & 0x40) { 390 pci_write_config_byte(dev, 0x50, val & (~0x40)); 391 392 /* verify the change for status output */ 393 pci_read_config_byte(dev, 0x50, &val); 394 if (val & 0x40) 395 dev_info(&dev->dev, "Detected MSI K8T Neo2-FIR; " 396 "can't enable onboard soundcard!\n"); 397 else 398 dev_info(&dev->dev, "Detected MSI K8T Neo2-FIR; " 399 "enabled onboard soundcard\n"); 400 } 401} 402DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8237, 403 pci_fixup_msi_k8t_onboard_sound); 404DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8237, 405 pci_fixup_msi_k8t_onboard_sound); 406 407/* 408 * Some Toshiba laptops need extra code to enable their TI TSB43AB22/A. 409 * 410 * We pretend to bring them out of full D3 state, and restore the proper 411 * IRQ, PCI cache line size, and BARs, otherwise the device won't function 412 * properly. In some cases, the device will generate an interrupt on 413 * the wrong IRQ line, causing any devices sharing the line it's 414 * *supposed* to use to be disabled by the kernel's IRQ debug code. 415 */ 416static u16 toshiba_line_size; 417 418static const struct dmi_system_id toshiba_ohci1394_dmi_table[] = { 419 { 420 .ident = "Toshiba PS5 based laptop", 421 .matches = { 422 DMI_MATCH(DMI_SYS_VENDOR, "TOSHIBA"), 423 DMI_MATCH(DMI_PRODUCT_VERSION, "PS5"), 424 }, 425 }, 426 { 427 .ident = "Toshiba PSM4 based laptop", 428 .matches = { 429 DMI_MATCH(DMI_SYS_VENDOR, "TOSHIBA"), 430 DMI_MATCH(DMI_PRODUCT_VERSION, "PSM4"), 431 }, 432 }, 433 { 434 .ident = "Toshiba A40 based laptop", 435 .matches = { 436 DMI_MATCH(DMI_SYS_VENDOR, "TOSHIBA"), 437 DMI_MATCH(DMI_PRODUCT_VERSION, "PSA40U"), 438 }, 439 }, 440 { } 441}; 442 443static void pci_pre_fixup_toshiba_ohci1394(struct pci_dev *dev) 444{ 445 if (!dmi_check_system(toshiba_ohci1394_dmi_table)) 446 return; /* only applies to certain Toshibas (so far) */ 447 448 dev->current_state = PCI_D3cold; 449 pci_read_config_word(dev, PCI_CACHE_LINE_SIZE, &toshiba_line_size); 450} 451DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_TI, 0x8032, 452 pci_pre_fixup_toshiba_ohci1394); 453 454static void pci_post_fixup_toshiba_ohci1394(struct pci_dev *dev) 455{ 456 if (!dmi_check_system(toshiba_ohci1394_dmi_table)) 457 return; /* only applies to certain Toshibas (so far) */ 458 459 /* Restore config space on Toshiba laptops */ 460 pci_write_config_word(dev, PCI_CACHE_LINE_SIZE, toshiba_line_size); 461 pci_read_config_byte(dev, PCI_INTERRUPT_LINE, (u8 *)&dev->irq); 462 pci_write_config_dword(dev, PCI_BASE_ADDRESS_0, 463 pci_resource_start(dev, 0)); 464 pci_write_config_dword(dev, PCI_BASE_ADDRESS_1, 465 pci_resource_start(dev, 1)); 466} 467DECLARE_PCI_FIXUP_ENABLE(PCI_VENDOR_ID_TI, 0x8032, 468 pci_post_fixup_toshiba_ohci1394); 469 470 471/* 472 * Prevent the BIOS trapping accesses to the Cyrix CS5530A video device 473 * configuration space. 474 */ 475static void pci_early_fixup_cyrix_5530(struct pci_dev *dev) 476{ 477 u8 r; 478 /* clear 'F4 Video Configuration Trap' bit */ 479 pci_read_config_byte(dev, 0x42, &r); 480 r &= 0xfd; 481 pci_write_config_byte(dev, 0x42, r); 482} 483DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_CYRIX, PCI_DEVICE_ID_CYRIX_5530_LEGACY, 484 pci_early_fixup_cyrix_5530); 485DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_CYRIX, PCI_DEVICE_ID_CYRIX_5530_LEGACY, 486 pci_early_fixup_cyrix_5530); 487 488/* 489 * Siemens Nixdorf AG FSC Multiprocessor Interrupt Controller: 490 * prevent update of the BAR0, which doesn't look like a normal BAR. 491 */ 492static void pci_siemens_interrupt_controller(struct pci_dev *dev) 493{ 494 dev->resource[0].flags |= IORESOURCE_PCI_FIXED; 495} 496DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_SIEMENS, 0x0015, 497 pci_siemens_interrupt_controller); 498 499/* 500 * SB600: Disable BAR1 on device 14.0 to avoid HPET resources from 501 * confusing the PCI engine: 502 */ 503static void sb600_disable_hpet_bar(struct pci_dev *dev) 504{ 505 u8 val; 506 507 /* 508 * The SB600 and SB700 both share the same device 509 * ID, but the PM register 0x55 does something different 510 * for the SB700, so make sure we are dealing with the 511 * SB600 before touching the bit: 512 */ 513 514 pci_read_config_byte(dev, 0x08, &val); 515 516 if (val < 0x2F) { 517 outb(0x55, 0xCD6); 518 val = inb(0xCD7); 519 520 /* Set bit 7 in PM register 0x55 */ 521 outb(0x55, 0xCD6); 522 outb(val | 0x80, 0xCD7); 523 } 524} 525DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_ATI, 0x4385, sb600_disable_hpet_bar); 526 527#ifdef CONFIG_HPET_TIMER 528static void sb600_hpet_quirk(struct pci_dev *dev) 529{ 530 struct resource *r = &dev->resource[1]; 531 532 if (r->flags & IORESOURCE_MEM && r->start == hpet_address) { 533 r->flags |= IORESOURCE_PCI_FIXED; 534 dev_info(&dev->dev, "reg 0x14 contains HPET; making it immovable\n"); 535 } 536} 537DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_ATI, 0x4385, sb600_hpet_quirk); 538#endif 539 540/* 541 * Twinhead H12Y needs us to block out a region otherwise we map devices 542 * there and any access kills the box. 543 * 544 * See: https://bugzilla.kernel.org/show_bug.cgi?id=10231 545 * 546 * Match off the LPC and svid/sdid (older kernels lose the bridge subvendor) 547 */ 548static void twinhead_reserve_killing_zone(struct pci_dev *dev) 549{ 550 if (dev->subsystem_vendor == 0x14FF && dev->subsystem_device == 0xA003) { 551 pr_info("Reserving memory on Twinhead H12Y\n"); 552 request_mem_region(0xFFB00000, 0x100000, "twinhead"); 553 } 554} 555DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x27B9, twinhead_reserve_killing_zone); 556 557static void pci_bdwep_bar(struct pci_dev *dev) 558{ 559 dev->non_compliant_bars = 1; 560} 561DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, 0x6fa0, pci_bdwep_bar); 562DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, 0x6fc0, pci_bdwep_bar); 563