1/* 2 * AT and PS/2 keyboard driver 3 * 4 * Copyright (c) 1999-2002 Vojtech Pavlik 5 */ 6 7/* 8 * This program is free software; you can redistribute it and/or modify it 9 * under the terms of the GNU General Public License version 2 as published by 10 * the Free Software Foundation. 11 */ 12 13/* 14 * This driver can handle standard AT keyboards and PS/2 keyboards in 15 * Translated and Raw Set 2 and Set 3, as well as AT keyboards on dumb 16 * input-only controllers and AT keyboards connected over a one way RS232 17 * converter. 18 */ 19 20#include <linux/delay.h> 21#include <linux/module.h> 22#include <linux/slab.h> 23#include <linux/interrupt.h> 24#include <linux/init.h> 25#include <linux/input.h> 26#include <linux/serio.h> 27#include <linux/workqueue.h> 28#include <linux/libps2.h> 29#include <linux/mutex.h> 30#include <linux/dmi.h> 31 32#define DRIVER_DESC "AT and PS/2 keyboard driver" 33 34MODULE_AUTHOR("Vojtech Pavlik <vojtech@suse.cz>"); 35MODULE_DESCRIPTION(DRIVER_DESC); 36MODULE_LICENSE("GPL"); 37 38static int atkbd_set = 2; 39module_param_named(set, atkbd_set, int, 0); 40MODULE_PARM_DESC(set, "Select keyboard code set (2 = default, 3 = PS/2 native)"); 41 42#if defined(__i386__) || defined(__x86_64__) || defined(__hppa__) 43static bool atkbd_reset; 44#else 45static bool atkbd_reset = true; 46#endif 47module_param_named(reset, atkbd_reset, bool, 0); 48MODULE_PARM_DESC(reset, "Reset keyboard during initialization"); 49 50static bool atkbd_softrepeat; 51module_param_named(softrepeat, atkbd_softrepeat, bool, 0); 52MODULE_PARM_DESC(softrepeat, "Use software keyboard repeat"); 53 54static bool atkbd_softraw = true; 55module_param_named(softraw, atkbd_softraw, bool, 0); 56MODULE_PARM_DESC(softraw, "Use software generated rawmode"); 57 58static bool atkbd_scroll; 59module_param_named(scroll, atkbd_scroll, bool, 0); 60MODULE_PARM_DESC(scroll, "Enable scroll-wheel on MS Office and similar keyboards"); 61 62static bool atkbd_extra; 63module_param_named(extra, atkbd_extra, bool, 0); 64MODULE_PARM_DESC(extra, "Enable extra LEDs and keys on IBM RapidAcces, EzKey and similar keyboards"); 65 66static bool atkbd_terminal; 67module_param_named(terminal, atkbd_terminal, bool, 0); 68MODULE_PARM_DESC(terminal, "Enable break codes on an IBM Terminal keyboard connected via AT/PS2"); 69 70/* 71 * Scancode to keycode tables. These are just the default setting, and 72 * are loadable via a userland utility. 73 */ 74 75#define ATKBD_KEYMAP_SIZE 512 76 77static const unsigned short atkbd_set2_keycode[ATKBD_KEYMAP_SIZE] = { 78 79#ifdef CONFIG_KEYBOARD_ATKBD_HP_KEYCODES 80 81/* XXX: need a more general approach */ 82 83#include "hpps2atkbd.h" /* include the keyboard scancodes */ 84 85#else 86 0, 67, 65, 63, 61, 59, 60, 88, 0, 68, 66, 64, 62, 15, 41,117, 87 0, 56, 42, 93, 29, 16, 2, 0, 0, 0, 44, 31, 30, 17, 3, 0, 88 0, 46, 45, 32, 18, 5, 4, 95, 0, 57, 47, 33, 20, 19, 6,183, 89 0, 49, 48, 35, 34, 21, 7,184, 0, 0, 50, 36, 22, 8, 9,185, 90 0, 51, 37, 23, 24, 11, 10, 0, 0, 52, 53, 38, 39, 25, 12, 0, 91 0, 89, 40, 0, 26, 13, 0, 0, 58, 54, 28, 27, 0, 43, 0, 85, 92 0, 86, 91, 90, 92, 0, 14, 94, 0, 79,124, 75, 71,121, 0, 0, 93 82, 83, 80, 76, 77, 72, 1, 69, 87, 78, 81, 74, 55, 73, 70, 99, 94 95 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 96 217,100,255, 0, 97,165, 0, 0,156, 0, 0, 0, 0, 0, 0,125, 97 173,114, 0,113, 0, 0, 0,126,128, 0, 0,140, 0, 0, 0,127, 98 159, 0,115, 0,164, 0, 0,116,158, 0,172,166, 0, 0, 0,142, 99 157, 0, 0, 0, 0, 0, 0, 0,155, 0, 98, 0, 0,163, 0, 0, 100 226, 0, 0, 0, 0, 0, 0, 0, 0,255, 96, 0, 0, 0,143, 0, 101 0, 0, 0, 0, 0, 0, 0, 0, 0,107, 0,105,102, 0, 0,112, 102 110,111,108,112,106,103, 0,119, 0,118,109, 0, 99,104,119, 0, 103 104 0, 0, 0, 65, 99, 105#endif 106}; 107 108static const unsigned short atkbd_set3_keycode[ATKBD_KEYMAP_SIZE] = { 109 110 0, 0, 0, 0, 0, 0, 0, 59, 1,138,128,129,130, 15, 41, 60, 111 131, 29, 42, 86, 58, 16, 2, 61,133, 56, 44, 31, 30, 17, 3, 62, 112 134, 46, 45, 32, 18, 5, 4, 63,135, 57, 47, 33, 20, 19, 6, 64, 113 136, 49, 48, 35, 34, 21, 7, 65,137,100, 50, 36, 22, 8, 9, 66, 114 125, 51, 37, 23, 24, 11, 10, 67,126, 52, 53, 38, 39, 25, 12, 68, 115 113,114, 40, 43, 26, 13, 87, 99, 97, 54, 28, 27, 43, 43, 88, 70, 116 108,105,119,103,111,107, 14,110, 0, 79,106, 75, 71,109,102,104, 117 82, 83, 80, 76, 77, 72, 69, 98, 0, 96, 81, 0, 78, 73, 55,183, 118 119 184,185,186,187, 74, 94, 92, 93, 0, 0, 0,125,126,127,112, 0, 120 0,139,172,163,165,115,152,172,166,140,160,154,113,114,167,168, 121 148,149,147,140 122}; 123 124static const unsigned short atkbd_unxlate_table[128] = { 125 0,118, 22, 30, 38, 37, 46, 54, 61, 62, 70, 69, 78, 85,102, 13, 126 21, 29, 36, 45, 44, 53, 60, 67, 68, 77, 84, 91, 90, 20, 28, 27, 127 35, 43, 52, 51, 59, 66, 75, 76, 82, 14, 18, 93, 26, 34, 33, 42, 128 50, 49, 58, 65, 73, 74, 89,124, 17, 41, 88, 5, 6, 4, 12, 3, 129 11, 2, 10, 1, 9,119,126,108,117,125,123,107,115,116,121,105, 130 114,122,112,113,127, 96, 97,120, 7, 15, 23, 31, 39, 47, 55, 63, 131 71, 79, 86, 94, 8, 16, 24, 32, 40, 48, 56, 64, 72, 80, 87,111, 132 19, 25, 57, 81, 83, 92, 95, 98, 99,100,101,103,104,106,109,110 133}; 134 135#define ATKBD_CMD_SETLEDS 0x10ed 136#define ATKBD_CMD_GSCANSET 0x11f0 137#define ATKBD_CMD_SSCANSET 0x10f0 138#define ATKBD_CMD_GETID 0x02f2 139#define ATKBD_CMD_SETREP 0x10f3 140#define ATKBD_CMD_ENABLE 0x00f4 141#define ATKBD_CMD_RESET_DIS 0x00f5 /* Reset to defaults and disable */ 142#define ATKBD_CMD_RESET_DEF 0x00f6 /* Reset to defaults */ 143#define ATKBD_CMD_SETALL_MB 0x00f8 /* Set all keys to give break codes */ 144#define ATKBD_CMD_SETALL_MBR 0x00fa /* ... and repeat */ 145#define ATKBD_CMD_RESET_BAT 0x02ff 146#define ATKBD_CMD_RESEND 0x00fe 147#define ATKBD_CMD_EX_ENABLE 0x10ea 148#define ATKBD_CMD_EX_SETLEDS 0x20eb 149#define ATKBD_CMD_OK_GETID 0x02e8 150 151#define ATKBD_RET_ACK 0xfa 152#define ATKBD_RET_NAK 0xfe 153#define ATKBD_RET_BAT 0xaa 154#define ATKBD_RET_EMUL0 0xe0 155#define ATKBD_RET_EMUL1 0xe1 156#define ATKBD_RET_RELEASE 0xf0 157#define ATKBD_RET_HANJA 0xf1 158#define ATKBD_RET_HANGEUL 0xf2 159#define ATKBD_RET_ERR 0xff 160 161#define ATKBD_KEY_UNKNOWN 0 162#define ATKBD_KEY_NULL 255 163 164#define ATKBD_SCR_1 0xfffe 165#define ATKBD_SCR_2 0xfffd 166#define ATKBD_SCR_4 0xfffc 167#define ATKBD_SCR_8 0xfffb 168#define ATKBD_SCR_CLICK 0xfffa 169#define ATKBD_SCR_LEFT 0xfff9 170#define ATKBD_SCR_RIGHT 0xfff8 171 172#define ATKBD_SPECIAL ATKBD_SCR_RIGHT 173 174#define ATKBD_LED_EVENT_BIT 0 175#define ATKBD_REP_EVENT_BIT 1 176 177#define ATKBD_XL_ERR 0x01 178#define ATKBD_XL_BAT 0x02 179#define ATKBD_XL_ACK 0x04 180#define ATKBD_XL_NAK 0x08 181#define ATKBD_XL_HANGEUL 0x10 182#define ATKBD_XL_HANJA 0x20 183 184static const struct { 185 unsigned short keycode; 186 unsigned char set2; 187} atkbd_scroll_keys[] = { 188 { ATKBD_SCR_1, 0xc5 }, 189 { ATKBD_SCR_2, 0x9d }, 190 { ATKBD_SCR_4, 0xa4 }, 191 { ATKBD_SCR_8, 0x9b }, 192 { ATKBD_SCR_CLICK, 0xe0 }, 193 { ATKBD_SCR_LEFT, 0xcb }, 194 { ATKBD_SCR_RIGHT, 0xd2 }, 195}; 196 197/* 198 * The atkbd control structure 199 */ 200 201struct atkbd { 202 203 struct ps2dev ps2dev; 204 struct input_dev *dev; 205 206 /* Written only during init */ 207 char name[64]; 208 char phys[32]; 209 210 unsigned short id; 211 unsigned short keycode[ATKBD_KEYMAP_SIZE]; 212 DECLARE_BITMAP(force_release_mask, ATKBD_KEYMAP_SIZE); 213 unsigned char set; 214 bool translated; 215 bool extra; 216 bool write; 217 bool softrepeat; 218 bool softraw; 219 bool scroll; 220 bool enabled; 221 222 /* Accessed only from interrupt */ 223 unsigned char emul; 224 bool resend; 225 bool release; 226 unsigned long xl_bit; 227 unsigned int last; 228 unsigned long time; 229 unsigned long err_count; 230 231 struct delayed_work event_work; 232 unsigned long event_jiffies; 233 unsigned long event_mask; 234 235 /* Serializes reconnect(), attr->set() and event work */ 236 struct mutex mutex; 237}; 238 239/* 240 * System-specific keymap fixup routine 241 */ 242static void (*atkbd_platform_fixup)(struct atkbd *, const void *data); 243static void *atkbd_platform_fixup_data; 244static unsigned int (*atkbd_platform_scancode_fixup)(struct atkbd *, unsigned int); 245 246/* 247 * Certain keyboards to not like ATKBD_CMD_RESET_DIS and stop responding 248 * to many commands until full reset (ATKBD_CMD_RESET_BAT) is performed. 249 */ 250static bool atkbd_skip_deactivate; 251 252static ssize_t atkbd_attr_show_helper(struct device *dev, char *buf, 253 ssize_t (*handler)(struct atkbd *, char *)); 254static ssize_t atkbd_attr_set_helper(struct device *dev, const char *buf, size_t count, 255 ssize_t (*handler)(struct atkbd *, const char *, size_t)); 256#define ATKBD_DEFINE_ATTR(_name) \ 257static ssize_t atkbd_show_##_name(struct atkbd *, char *); \ 258static ssize_t atkbd_set_##_name(struct atkbd *, const char *, size_t); \ 259static ssize_t atkbd_do_show_##_name(struct device *d, \ 260 struct device_attribute *attr, char *b) \ 261{ \ 262 return atkbd_attr_show_helper(d, b, atkbd_show_##_name); \ 263} \ 264static ssize_t atkbd_do_set_##_name(struct device *d, \ 265 struct device_attribute *attr, const char *b, size_t s) \ 266{ \ 267 return atkbd_attr_set_helper(d, b, s, atkbd_set_##_name); \ 268} \ 269static struct device_attribute atkbd_attr_##_name = \ 270 __ATTR(_name, S_IWUSR | S_IRUGO, atkbd_do_show_##_name, atkbd_do_set_##_name); 271 272ATKBD_DEFINE_ATTR(extra); 273ATKBD_DEFINE_ATTR(force_release); 274ATKBD_DEFINE_ATTR(scroll); 275ATKBD_DEFINE_ATTR(set); 276ATKBD_DEFINE_ATTR(softrepeat); 277ATKBD_DEFINE_ATTR(softraw); 278 279#define ATKBD_DEFINE_RO_ATTR(_name) \ 280static ssize_t atkbd_show_##_name(struct atkbd *, char *); \ 281static ssize_t atkbd_do_show_##_name(struct device *d, \ 282 struct device_attribute *attr, char *b) \ 283{ \ 284 return atkbd_attr_show_helper(d, b, atkbd_show_##_name); \ 285} \ 286static struct device_attribute atkbd_attr_##_name = \ 287 __ATTR(_name, S_IRUGO, atkbd_do_show_##_name, NULL); 288 289ATKBD_DEFINE_RO_ATTR(err_count); 290 291static struct attribute *atkbd_attributes[] = { 292 &atkbd_attr_extra.attr, 293 &atkbd_attr_force_release.attr, 294 &atkbd_attr_scroll.attr, 295 &atkbd_attr_set.attr, 296 &atkbd_attr_softrepeat.attr, 297 &atkbd_attr_softraw.attr, 298 &atkbd_attr_err_count.attr, 299 NULL 300}; 301 302static struct attribute_group atkbd_attribute_group = { 303 .attrs = atkbd_attributes, 304}; 305 306static const unsigned int xl_table[] = { 307 ATKBD_RET_BAT, ATKBD_RET_ERR, ATKBD_RET_ACK, 308 ATKBD_RET_NAK, ATKBD_RET_HANJA, ATKBD_RET_HANGEUL, 309}; 310 311/* 312 * Checks if we should mangle the scancode to extract 'release' bit 313 * in translated mode. 314 */ 315static bool atkbd_need_xlate(unsigned long xl_bit, unsigned char code) 316{ 317 int i; 318 319 if (code == ATKBD_RET_EMUL0 || code == ATKBD_RET_EMUL1) 320 return false; 321 322 for (i = 0; i < ARRAY_SIZE(xl_table); i++) 323 if (code == xl_table[i]) 324 return test_bit(i, &xl_bit); 325 326 return true; 327} 328 329/* 330 * Calculates new value of xl_bit so the driver can distinguish 331 * between make/break pair of scancodes for select keys and PS/2 332 * protocol responses. 333 */ 334static void atkbd_calculate_xl_bit(struct atkbd *atkbd, unsigned char code) 335{ 336 int i; 337 338 for (i = 0; i < ARRAY_SIZE(xl_table); i++) { 339 if (!((code ^ xl_table[i]) & 0x7f)) { 340 if (code & 0x80) 341 __clear_bit(i, &atkbd->xl_bit); 342 else 343 __set_bit(i, &atkbd->xl_bit); 344 break; 345 } 346 } 347} 348 349/* 350 * Encode the scancode, 0xe0 prefix, and high bit into a single integer, 351 * keeping kernel 2.4 compatibility for set 2 352 */ 353static unsigned int atkbd_compat_scancode(struct atkbd *atkbd, unsigned int code) 354{ 355 if (atkbd->set == 3) { 356 if (atkbd->emul == 1) 357 code |= 0x100; 358 } else { 359 code = (code & 0x7f) | ((code & 0x80) << 1); 360 if (atkbd->emul == 1) 361 code |= 0x80; 362 } 363 364 return code; 365} 366 367/* 368 * atkbd_interrupt(). Here takes place processing of data received from 369 * the keyboard into events. 370 */ 371 372static irqreturn_t atkbd_interrupt(struct serio *serio, unsigned char data, 373 unsigned int flags) 374{ 375 struct atkbd *atkbd = serio_get_drvdata(serio); 376 struct input_dev *dev = atkbd->dev; 377 unsigned int code = data; 378 int scroll = 0, hscroll = 0, click = -1; 379 int value; 380 unsigned short keycode; 381 382 dev_dbg(&serio->dev, "Received %02x flags %02x\n", data, flags); 383 384#if !defined(__i386__) && !defined (__x86_64__) 385 if ((flags & (SERIO_FRAME | SERIO_PARITY)) && (~flags & SERIO_TIMEOUT) && !atkbd->resend && atkbd->write) { 386 dev_warn(&serio->dev, "Frame/parity error: %02x\n", flags); 387 serio_write(serio, ATKBD_CMD_RESEND); 388 atkbd->resend = true; 389 goto out; 390 } 391 392 if (!flags && data == ATKBD_RET_ACK) 393 atkbd->resend = false; 394#endif 395 396 if (unlikely(atkbd->ps2dev.flags & PS2_FLAG_ACK)) 397 if (ps2_handle_ack(&atkbd->ps2dev, data)) 398 goto out; 399 400 if (unlikely(atkbd->ps2dev.flags & PS2_FLAG_CMD)) 401 if (ps2_handle_response(&atkbd->ps2dev, data)) 402 goto out; 403 404 if (!atkbd->enabled) 405 goto out; 406 407 input_event(dev, EV_MSC, MSC_RAW, code); 408 409 if (atkbd_platform_scancode_fixup) 410 code = atkbd_platform_scancode_fixup(atkbd, code); 411 412 if (atkbd->translated) { 413 414 if (atkbd->emul || atkbd_need_xlate(atkbd->xl_bit, code)) { 415 atkbd->release = code >> 7; 416 code &= 0x7f; 417 } 418 419 if (!atkbd->emul) 420 atkbd_calculate_xl_bit(atkbd, data); 421 } 422 423 switch (code) { 424 case ATKBD_RET_BAT: 425 atkbd->enabled = false; 426 serio_reconnect(atkbd->ps2dev.serio); 427 goto out; 428 case ATKBD_RET_EMUL0: 429 atkbd->emul = 1; 430 goto out; 431 case ATKBD_RET_EMUL1: 432 atkbd->emul = 2; 433 goto out; 434 case ATKBD_RET_RELEASE: 435 atkbd->release = true; 436 goto out; 437 case ATKBD_RET_ACK: 438 case ATKBD_RET_NAK: 439 if (printk_ratelimit()) 440 dev_warn(&serio->dev, 441 "Spurious %s on %s. " 442 "Some program might be trying to access hardware directly.\n", 443 data == ATKBD_RET_ACK ? "ACK" : "NAK", serio->phys); 444 goto out; 445 case ATKBD_RET_ERR: 446 atkbd->err_count++; 447 dev_dbg(&serio->dev, "Keyboard on %s reports too many keys pressed.\n", 448 serio->phys); 449 goto out; 450 } 451 452 code = atkbd_compat_scancode(atkbd, code); 453 454 if (atkbd->emul && --atkbd->emul) 455 goto out; 456 457 keycode = atkbd->keycode[code]; 458 459 if (!(atkbd->release && test_bit(code, atkbd->force_release_mask))) 460 if (keycode != ATKBD_KEY_NULL) 461 input_event(dev, EV_MSC, MSC_SCAN, code); 462 463 switch (keycode) { 464 case ATKBD_KEY_NULL: 465 break; 466 case ATKBD_KEY_UNKNOWN: 467 dev_warn(&serio->dev, 468 "Unknown key %s (%s set %d, code %#x on %s).\n", 469 atkbd->release ? "released" : "pressed", 470 atkbd->translated ? "translated" : "raw", 471 atkbd->set, code, serio->phys); 472 dev_warn(&serio->dev, 473 "Use 'setkeycodes %s%02x <keycode>' to make it known.\n", 474 code & 0x80 ? "e0" : "", code & 0x7f); 475 input_sync(dev); 476 break; 477 case ATKBD_SCR_1: 478 scroll = 1; 479 break; 480 case ATKBD_SCR_2: 481 scroll = 2; 482 break; 483 case ATKBD_SCR_4: 484 scroll = 4; 485 break; 486 case ATKBD_SCR_8: 487 scroll = 8; 488 break; 489 case ATKBD_SCR_CLICK: 490 click = !atkbd->release; 491 break; 492 case ATKBD_SCR_LEFT: 493 hscroll = -1; 494 break; 495 case ATKBD_SCR_RIGHT: 496 hscroll = 1; 497 break; 498 default: 499 if (atkbd->release) { 500 value = 0; 501 atkbd->last = 0; 502 } else if (!atkbd->softrepeat && test_bit(keycode, dev->key)) { 503 /* Workaround Toshiba laptop multiple keypress */ 504 value = time_before(jiffies, atkbd->time) && atkbd->last == code ? 1 : 2; 505 } else { 506 value = 1; 507 atkbd->last = code; 508 atkbd->time = jiffies + msecs_to_jiffies(dev->rep[REP_DELAY]) / 2; 509 } 510 511 input_event(dev, EV_KEY, keycode, value); 512 input_sync(dev); 513 514 if (value && test_bit(code, atkbd->force_release_mask)) { 515 input_event(dev, EV_MSC, MSC_SCAN, code); 516 input_report_key(dev, keycode, 0); 517 input_sync(dev); 518 } 519 } 520 521 if (atkbd->scroll) { 522 if (click != -1) 523 input_report_key(dev, BTN_MIDDLE, click); 524 input_report_rel(dev, REL_WHEEL, 525 atkbd->release ? -scroll : scroll); 526 input_report_rel(dev, REL_HWHEEL, hscroll); 527 input_sync(dev); 528 } 529 530 atkbd->release = false; 531out: 532 return IRQ_HANDLED; 533} 534 535static int atkbd_set_repeat_rate(struct atkbd *atkbd) 536{ 537 const short period[32] = 538 { 33, 37, 42, 46, 50, 54, 58, 63, 67, 75, 83, 92, 100, 109, 116, 125, 539 133, 149, 167, 182, 200, 217, 232, 250, 270, 303, 333, 370, 400, 435, 470, 500 }; 540 const short delay[4] = 541 { 250, 500, 750, 1000 }; 542 543 struct input_dev *dev = atkbd->dev; 544 unsigned char param; 545 int i = 0, j = 0; 546 547 while (i < ARRAY_SIZE(period) - 1 && period[i] < dev->rep[REP_PERIOD]) 548 i++; 549 dev->rep[REP_PERIOD] = period[i]; 550 551 while (j < ARRAY_SIZE(delay) - 1 && delay[j] < dev->rep[REP_DELAY]) 552 j++; 553 dev->rep[REP_DELAY] = delay[j]; 554 555 param = i | (j << 5); 556 return ps2_command(&atkbd->ps2dev, ¶m, ATKBD_CMD_SETREP); 557} 558 559static int atkbd_set_leds(struct atkbd *atkbd) 560{ 561 struct input_dev *dev = atkbd->dev; 562 unsigned char param[2]; 563 564 param[0] = (test_bit(LED_SCROLLL, dev->led) ? 1 : 0) 565 | (test_bit(LED_NUML, dev->led) ? 2 : 0) 566 | (test_bit(LED_CAPSL, dev->led) ? 4 : 0); 567 if (ps2_command(&atkbd->ps2dev, param, ATKBD_CMD_SETLEDS)) 568 return -1; 569 570 if (atkbd->extra) { 571 param[0] = 0; 572 param[1] = (test_bit(LED_COMPOSE, dev->led) ? 0x01 : 0) 573 | (test_bit(LED_SLEEP, dev->led) ? 0x02 : 0) 574 | (test_bit(LED_SUSPEND, dev->led) ? 0x04 : 0) 575 | (test_bit(LED_MISC, dev->led) ? 0x10 : 0) 576 | (test_bit(LED_MUTE, dev->led) ? 0x20 : 0); 577 if (ps2_command(&atkbd->ps2dev, param, ATKBD_CMD_EX_SETLEDS)) 578 return -1; 579 } 580 581 return 0; 582} 583 584/* 585 * atkbd_event_work() is used to complete processing of events that 586 * can not be processed by input_event() which is often called from 587 * interrupt context. 588 */ 589 590static void atkbd_event_work(struct work_struct *work) 591{ 592 struct atkbd *atkbd = container_of(work, struct atkbd, event_work.work); 593 594 mutex_lock(&atkbd->mutex); 595 596 if (!atkbd->enabled) { 597 /* 598 * Serio ports are resumed asynchronously so while driver core 599 * thinks that device is already fully operational in reality 600 * it may not be ready yet. In this case we need to keep 601 * rescheduling till reconnect completes. 602 */ 603 schedule_delayed_work(&atkbd->event_work, 604 msecs_to_jiffies(100)); 605 } else { 606 if (test_and_clear_bit(ATKBD_LED_EVENT_BIT, &atkbd->event_mask)) 607 atkbd_set_leds(atkbd); 608 609 if (test_and_clear_bit(ATKBD_REP_EVENT_BIT, &atkbd->event_mask)) 610 atkbd_set_repeat_rate(atkbd); 611 } 612 613 mutex_unlock(&atkbd->mutex); 614} 615 616/* 617 * Schedule switch for execution. We need to throttle requests, 618 * otherwise keyboard may become unresponsive. 619 */ 620static void atkbd_schedule_event_work(struct atkbd *atkbd, int event_bit) 621{ 622 unsigned long delay = msecs_to_jiffies(50); 623 624 if (time_after(jiffies, atkbd->event_jiffies + delay)) 625 delay = 0; 626 627 atkbd->event_jiffies = jiffies; 628 set_bit(event_bit, &atkbd->event_mask); 629 mb(); 630 schedule_delayed_work(&atkbd->event_work, delay); 631} 632 633/* 634 * Event callback from the input module. Events that change the state of 635 * the hardware are processed here. If action can not be performed in 636 * interrupt context it is offloaded to atkbd_event_work. 637 */ 638 639static int atkbd_event(struct input_dev *dev, 640 unsigned int type, unsigned int code, int value) 641{ 642 struct atkbd *atkbd = input_get_drvdata(dev); 643 644 if (!atkbd->write) 645 return -1; 646 647 switch (type) { 648 649 case EV_LED: 650 atkbd_schedule_event_work(atkbd, ATKBD_LED_EVENT_BIT); 651 return 0; 652 653 case EV_REP: 654 if (!atkbd->softrepeat) 655 atkbd_schedule_event_work(atkbd, ATKBD_REP_EVENT_BIT); 656 return 0; 657 658 default: 659 return -1; 660 } 661} 662 663/* 664 * atkbd_enable() signals that interrupt handler is allowed to 665 * generate input events. 666 */ 667 668static inline void atkbd_enable(struct atkbd *atkbd) 669{ 670 serio_pause_rx(atkbd->ps2dev.serio); 671 atkbd->enabled = true; 672 serio_continue_rx(atkbd->ps2dev.serio); 673} 674 675/* 676 * atkbd_disable() tells input handler that all incoming data except 677 * for ACKs and command response should be dropped. 678 */ 679 680static inline void atkbd_disable(struct atkbd *atkbd) 681{ 682 serio_pause_rx(atkbd->ps2dev.serio); 683 atkbd->enabled = false; 684 serio_continue_rx(atkbd->ps2dev.serio); 685} 686 687static int atkbd_activate(struct atkbd *atkbd) 688{ 689 struct ps2dev *ps2dev = &atkbd->ps2dev; 690 691/* 692 * Enable the keyboard to receive keystrokes. 693 */ 694 695 if (ps2_command(ps2dev, NULL, ATKBD_CMD_ENABLE)) { 696 dev_err(&ps2dev->serio->dev, 697 "Failed to enable keyboard on %s\n", 698 ps2dev->serio->phys); 699 return -1; 700 } 701 702 return 0; 703} 704 705/* 706 * atkbd_deactivate() resets and disables the keyboard from sending 707 * keystrokes. 708 */ 709 710static void atkbd_deactivate(struct atkbd *atkbd) 711{ 712 struct ps2dev *ps2dev = &atkbd->ps2dev; 713 714 if (ps2_command(ps2dev, NULL, ATKBD_CMD_RESET_DIS)) 715 dev_err(&ps2dev->serio->dev, 716 "Failed to deactivate keyboard on %s\n", 717 ps2dev->serio->phys); 718} 719 720/* 721 * atkbd_probe() probes for an AT keyboard on a serio port. 722 */ 723 724static int atkbd_probe(struct atkbd *atkbd) 725{ 726 struct ps2dev *ps2dev = &atkbd->ps2dev; 727 unsigned char param[2]; 728 729/* 730 * Some systems, where the bit-twiddling when testing the io-lines of the 731 * controller may confuse the keyboard need a full reset of the keyboard. On 732 * these systems the BIOS also usually doesn't do it for us. 733 */ 734 735 if (atkbd_reset) 736 if (ps2_command(ps2dev, NULL, ATKBD_CMD_RESET_BAT)) 737 dev_warn(&ps2dev->serio->dev, 738 "keyboard reset failed on %s\n", 739 ps2dev->serio->phys); 740 741/* 742 * Then we check the keyboard ID. We should get 0xab83 under normal conditions. 743 * Some keyboards report different values, but the first byte is always 0xab or 744 * 0xac. Some old AT keyboards don't report anything. If a mouse is connected, this 745 * should make sure we don't try to set the LEDs on it. 746 */ 747 748 param[0] = param[1] = 0xa5; /* initialize with invalid values */ 749 if (ps2_command(ps2dev, param, ATKBD_CMD_GETID)) { 750 751/* 752 * If the get ID command failed, we check if we can at least set the LEDs on 753 * the keyboard. This should work on every keyboard out there. It also turns 754 * the LEDs off, which we want anyway. 755 */ 756 param[0] = 0; 757 if (ps2_command(ps2dev, param, ATKBD_CMD_SETLEDS)) 758 return -1; 759 atkbd->id = 0xabba; 760 return 0; 761 } 762 763 if (!ps2_is_keyboard_id(param[0])) 764 return -1; 765 766 atkbd->id = (param[0] << 8) | param[1]; 767 768 if (atkbd->id == 0xaca1 && atkbd->translated) { 769 dev_err(&ps2dev->serio->dev, 770 "NCD terminal keyboards are only supported on non-translating controllers. " 771 "Use i8042.direct=1 to disable translation.\n"); 772 return -1; 773 } 774 775/* 776 * Make sure nothing is coming from the keyboard and disturbs our 777 * internal state. 778 */ 779 if (!atkbd_skip_deactivate) 780 atkbd_deactivate(atkbd); 781 782 return 0; 783} 784 785/* 786 * atkbd_select_set checks if a keyboard has a working Set 3 support, and 787 * sets it into that. Unfortunately there are keyboards that can be switched 788 * to Set 3, but don't work well in that (BTC Multimedia ...) 789 */ 790 791static int atkbd_select_set(struct atkbd *atkbd, int target_set, int allow_extra) 792{ 793 struct ps2dev *ps2dev = &atkbd->ps2dev; 794 unsigned char param[2]; 795 796 atkbd->extra = false; 797/* 798 * For known special keyboards we can go ahead and set the correct set. 799 * We check for NCD PS/2 Sun, NorthGate OmniKey 101 and 800 * IBM RapidAccess / IBM EzButton / Chicony KBP-8993 keyboards. 801 */ 802 803 if (atkbd->translated) 804 return 2; 805 806 if (atkbd->id == 0xaca1) { 807 param[0] = 3; 808 ps2_command(ps2dev, param, ATKBD_CMD_SSCANSET); 809 return 3; 810 } 811 812 if (allow_extra) { 813 param[0] = 0x71; 814 if (!ps2_command(ps2dev, param, ATKBD_CMD_EX_ENABLE)) { 815 atkbd->extra = true; 816 return 2; 817 } 818 } 819 820 if (atkbd_terminal) { 821 ps2_command(ps2dev, param, ATKBD_CMD_SETALL_MB); 822 return 3; 823 } 824 825 if (target_set != 3) 826 return 2; 827 828 if (!ps2_command(ps2dev, param, ATKBD_CMD_OK_GETID)) { 829 atkbd->id = param[0] << 8 | param[1]; 830 return 2; 831 } 832 833 param[0] = 3; 834 if (ps2_command(ps2dev, param, ATKBD_CMD_SSCANSET)) 835 return 2; 836 837 param[0] = 0; 838 if (ps2_command(ps2dev, param, ATKBD_CMD_GSCANSET)) 839 return 2; 840 841 if (param[0] != 3) { 842 param[0] = 2; 843 if (ps2_command(ps2dev, param, ATKBD_CMD_SSCANSET)) 844 return 2; 845 } 846 847 ps2_command(ps2dev, param, ATKBD_CMD_SETALL_MBR); 848 849 return 3; 850} 851 852static int atkbd_reset_state(struct atkbd *atkbd) 853{ 854 struct ps2dev *ps2dev = &atkbd->ps2dev; 855 unsigned char param[1]; 856 857/* 858 * Set the LEDs to a predefined state (all off). 859 */ 860 861 param[0] = 0; 862 if (ps2_command(ps2dev, param, ATKBD_CMD_SETLEDS)) 863 return -1; 864 865/* 866 * Set autorepeat to fastest possible. 867 */ 868 869 param[0] = 0; 870 if (ps2_command(ps2dev, param, ATKBD_CMD_SETREP)) 871 return -1; 872 873 return 0; 874} 875 876/* 877 * atkbd_cleanup() restores the keyboard state so that BIOS is happy after a 878 * reboot. 879 */ 880 881static void atkbd_cleanup(struct serio *serio) 882{ 883 struct atkbd *atkbd = serio_get_drvdata(serio); 884 885 atkbd_disable(atkbd); 886 ps2_command(&atkbd->ps2dev, NULL, ATKBD_CMD_RESET_DEF); 887} 888 889 890/* 891 * atkbd_disconnect() closes and frees. 892 */ 893 894static void atkbd_disconnect(struct serio *serio) 895{ 896 struct atkbd *atkbd = serio_get_drvdata(serio); 897 898 sysfs_remove_group(&serio->dev.kobj, &atkbd_attribute_group); 899 900 atkbd_disable(atkbd); 901 902 input_unregister_device(atkbd->dev); 903 904 /* 905 * Make sure we don't have a command in flight. 906 * Note that since atkbd->enabled is false event work will keep 907 * rescheduling itself until it gets canceled and will not try 908 * accessing freed input device or serio port. 909 */ 910 cancel_delayed_work_sync(&atkbd->event_work); 911 912 serio_close(serio); 913 serio_set_drvdata(serio, NULL); 914 kfree(atkbd); 915} 916 917/* 918 * generate release events for the keycodes given in data 919 */ 920static void atkbd_apply_forced_release_keylist(struct atkbd* atkbd, 921 const void *data) 922{ 923 const unsigned int *keys = data; 924 unsigned int i; 925 926 if (atkbd->set == 2) 927 for (i = 0; keys[i] != -1U; i++) 928 __set_bit(keys[i], atkbd->force_release_mask); 929} 930 931/* 932 * Most special keys (Fn+F?) on Dell laptops do not generate release 933 * events so we have to do it ourselves. 934 */ 935static unsigned int atkbd_dell_laptop_forced_release_keys[] = { 936 0x85, 0x86, 0x87, 0x88, 0x89, 0x8a, 0x8b, 0x8f, 0x93, -1U 937}; 938 939/* 940 * Perform fixup for HP system that doesn't generate release 941 * for its video switch 942 */ 943static unsigned int atkbd_hp_forced_release_keys[] = { 944 0x94, -1U 945}; 946 947/* 948 * Samsung NC10,NC20 with Fn+F? key release not working 949 */ 950static unsigned int atkbd_samsung_forced_release_keys[] = { 951 0x82, 0x83, 0x84, 0x86, 0x88, 0x89, 0xb3, 0xf7, 0xf9, -1U 952}; 953 954/* 955 * Amilo Pi 3525 key release for Fn+Volume keys not working 956 */ 957static unsigned int atkbd_amilo_pi3525_forced_release_keys[] = { 958 0x20, 0xa0, 0x2e, 0xae, 0x30, 0xb0, -1U 959}; 960 961/* 962 * Amilo Xi 3650 key release for light touch bar not working 963 */ 964static unsigned int atkbd_amilo_xi3650_forced_release_keys[] = { 965 0x67, 0xed, 0x90, 0xa2, 0x99, 0xa4, 0xae, 0xb0, -1U 966}; 967 968/* 969 * Soltech TA12 system with broken key release on volume keys and mute key 970 */ 971static unsigned int atkdb_soltech_ta12_forced_release_keys[] = { 972 0xa0, 0xae, 0xb0, -1U 973}; 974 975/* 976 * Many notebooks don't send key release event for volume up/down 977 * keys, with key list below common among them 978 */ 979static unsigned int atkbd_volume_forced_release_keys[] = { 980 0xae, 0xb0, -1U 981}; 982 983/* 984 * OQO 01+ multimedia keys (64--66) generate e0 6x upon release whereas 985 * they should be generating e4-e6 (0x80 | code). 986 */ 987static unsigned int atkbd_oqo_01plus_scancode_fixup(struct atkbd *atkbd, 988 unsigned int code) 989{ 990 if (atkbd->translated && atkbd->emul == 1 && 991 (code == 0x64 || code == 0x65 || code == 0x66)) { 992 atkbd->emul = 0; 993 code |= 0x80; 994 } 995 996 return code; 997} 998 999/* 1000 * atkbd_set_keycode_table() initializes keyboard's keycode table 1001 * according to the selected scancode set 1002 */ 1003 1004static void atkbd_set_keycode_table(struct atkbd *atkbd) 1005{ 1006 unsigned int scancode; 1007 int i, j; 1008 1009 memset(atkbd->keycode, 0, sizeof(atkbd->keycode)); 1010 bitmap_zero(atkbd->force_release_mask, ATKBD_KEYMAP_SIZE); 1011 1012 if (atkbd->translated) { 1013 for (i = 0; i < 128; i++) { 1014 scancode = atkbd_unxlate_table[i]; 1015 atkbd->keycode[i] = atkbd_set2_keycode[scancode]; 1016 atkbd->keycode[i | 0x80] = atkbd_set2_keycode[scancode | 0x80]; 1017 if (atkbd->scroll) 1018 for (j = 0; j < ARRAY_SIZE(atkbd_scroll_keys); j++) 1019 if ((scancode | 0x80) == atkbd_scroll_keys[j].set2) 1020 atkbd->keycode[i | 0x80] = atkbd_scroll_keys[j].keycode; 1021 } 1022 } else if (atkbd->set == 3) { 1023 memcpy(atkbd->keycode, atkbd_set3_keycode, sizeof(atkbd->keycode)); 1024 } else { 1025 memcpy(atkbd->keycode, atkbd_set2_keycode, sizeof(atkbd->keycode)); 1026 1027 if (atkbd->scroll) 1028 for (i = 0; i < ARRAY_SIZE(atkbd_scroll_keys); i++) { 1029 scancode = atkbd_scroll_keys[i].set2; 1030 atkbd->keycode[scancode] = atkbd_scroll_keys[i].keycode; 1031 } 1032 } 1033 1034/* 1035 * HANGEUL and HANJA keys do not send release events so we need to 1036 * generate such events ourselves 1037 */ 1038 scancode = atkbd_compat_scancode(atkbd, ATKBD_RET_HANGEUL); 1039 atkbd->keycode[scancode] = KEY_HANGEUL; 1040 __set_bit(scancode, atkbd->force_release_mask); 1041 1042 scancode = atkbd_compat_scancode(atkbd, ATKBD_RET_HANJA); 1043 atkbd->keycode[scancode] = KEY_HANJA; 1044 __set_bit(scancode, atkbd->force_release_mask); 1045 1046/* 1047 * Perform additional fixups 1048 */ 1049 if (atkbd_platform_fixup) 1050 atkbd_platform_fixup(atkbd, atkbd_platform_fixup_data); 1051} 1052 1053/* 1054 * atkbd_set_device_attrs() sets up keyboard's input device structure 1055 */ 1056 1057static void atkbd_set_device_attrs(struct atkbd *atkbd) 1058{ 1059 struct input_dev *input_dev = atkbd->dev; 1060 int i; 1061 1062 if (atkbd->extra) 1063 snprintf(atkbd->name, sizeof(atkbd->name), 1064 "AT Set 2 Extra keyboard"); 1065 else 1066 snprintf(atkbd->name, sizeof(atkbd->name), 1067 "AT %s Set %d keyboard", 1068 atkbd->translated ? "Translated" : "Raw", atkbd->set); 1069 1070 snprintf(atkbd->phys, sizeof(atkbd->phys), 1071 "%s/input0", atkbd->ps2dev.serio->phys); 1072 1073 input_dev->name = atkbd->name; 1074 input_dev->phys = atkbd->phys; 1075 input_dev->id.bustype = BUS_I8042; 1076 input_dev->id.vendor = 0x0001; 1077 input_dev->id.product = atkbd->translated ? 1 : atkbd->set; 1078 input_dev->id.version = atkbd->id; 1079 input_dev->event = atkbd_event; 1080 input_dev->dev.parent = &atkbd->ps2dev.serio->dev; 1081 1082 input_set_drvdata(input_dev, atkbd); 1083 1084 input_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_REP) | 1085 BIT_MASK(EV_MSC); 1086 1087 if (atkbd->write) { 1088 input_dev->evbit[0] |= BIT_MASK(EV_LED); 1089 input_dev->ledbit[0] = BIT_MASK(LED_NUML) | 1090 BIT_MASK(LED_CAPSL) | BIT_MASK(LED_SCROLLL); 1091 } 1092 1093 if (atkbd->extra) 1094 input_dev->ledbit[0] |= BIT_MASK(LED_COMPOSE) | 1095 BIT_MASK(LED_SUSPEND) | BIT_MASK(LED_SLEEP) | 1096 BIT_MASK(LED_MUTE) | BIT_MASK(LED_MISC); 1097 1098 if (!atkbd->softrepeat) { 1099 input_dev->rep[REP_DELAY] = 250; 1100 input_dev->rep[REP_PERIOD] = 33; 1101 } 1102 1103 input_dev->mscbit[0] = atkbd->softraw ? BIT_MASK(MSC_SCAN) : 1104 BIT_MASK(MSC_RAW) | BIT_MASK(MSC_SCAN); 1105 1106 if (atkbd->scroll) { 1107 input_dev->evbit[0] |= BIT_MASK(EV_REL); 1108 input_dev->relbit[0] = BIT_MASK(REL_WHEEL) | 1109 BIT_MASK(REL_HWHEEL); 1110 __set_bit(BTN_MIDDLE, input_dev->keybit); 1111 } 1112 1113 input_dev->keycode = atkbd->keycode; 1114 input_dev->keycodesize = sizeof(unsigned short); 1115 input_dev->keycodemax = ARRAY_SIZE(atkbd_set2_keycode); 1116 1117 for (i = 0; i < ATKBD_KEYMAP_SIZE; i++) { 1118 if (atkbd->keycode[i] != KEY_RESERVED && 1119 atkbd->keycode[i] != ATKBD_KEY_NULL && 1120 atkbd->keycode[i] < ATKBD_SPECIAL) { 1121 __set_bit(atkbd->keycode[i], input_dev->keybit); 1122 } 1123 } 1124} 1125 1126/* 1127 * atkbd_connect() is called when the serio module finds an interface 1128 * that isn't handled yet by an appropriate device driver. We check if 1129 * there is an AT keyboard out there and if yes, we register ourselves 1130 * to the input module. 1131 */ 1132 1133static int atkbd_connect(struct serio *serio, struct serio_driver *drv) 1134{ 1135 struct atkbd *atkbd; 1136 struct input_dev *dev; 1137 int err = -ENOMEM; 1138 1139 atkbd = kzalloc(sizeof(struct atkbd), GFP_KERNEL); 1140 dev = input_allocate_device(); 1141 if (!atkbd || !dev) 1142 goto fail1; 1143 1144 atkbd->dev = dev; 1145 ps2_init(&atkbd->ps2dev, serio); 1146 INIT_DELAYED_WORK(&atkbd->event_work, atkbd_event_work); 1147 mutex_init(&atkbd->mutex); 1148 1149 switch (serio->id.type) { 1150 1151 case SERIO_8042_XL: 1152 atkbd->translated = true; 1153 /* Fall through */ 1154 1155 case SERIO_8042: 1156 if (serio->write) 1157 atkbd->write = true; 1158 break; 1159 } 1160 1161 atkbd->softraw = atkbd_softraw; 1162 atkbd->softrepeat = atkbd_softrepeat; 1163 atkbd->scroll = atkbd_scroll; 1164 1165 if (atkbd->softrepeat) 1166 atkbd->softraw = true; 1167 1168 serio_set_drvdata(serio, atkbd); 1169 1170 err = serio_open(serio, drv); 1171 if (err) 1172 goto fail2; 1173 1174 if (atkbd->write) { 1175 1176 if (atkbd_probe(atkbd)) { 1177 err = -ENODEV; 1178 goto fail3; 1179 } 1180 1181 atkbd->set = atkbd_select_set(atkbd, atkbd_set, atkbd_extra); 1182 atkbd_reset_state(atkbd); 1183 1184 } else { 1185 atkbd->set = 2; 1186 atkbd->id = 0xab00; 1187 } 1188 1189 atkbd_set_keycode_table(atkbd); 1190 atkbd_set_device_attrs(atkbd); 1191 1192 err = sysfs_create_group(&serio->dev.kobj, &atkbd_attribute_group); 1193 if (err) 1194 goto fail3; 1195 1196 atkbd_enable(atkbd); 1197 if (serio->write) 1198 atkbd_activate(atkbd); 1199 1200 err = input_register_device(atkbd->dev); 1201 if (err) 1202 goto fail4; 1203 1204 return 0; 1205 1206 fail4: sysfs_remove_group(&serio->dev.kobj, &atkbd_attribute_group); 1207 fail3: serio_close(serio); 1208 fail2: serio_set_drvdata(serio, NULL); 1209 fail1: input_free_device(dev); 1210 kfree(atkbd); 1211 return err; 1212} 1213 1214/* 1215 * atkbd_reconnect() tries to restore keyboard into a sane state and is 1216 * most likely called on resume. 1217 */ 1218 1219static int atkbd_reconnect(struct serio *serio) 1220{ 1221 struct atkbd *atkbd = serio_get_drvdata(serio); 1222 struct serio_driver *drv = serio->drv; 1223 int retval = -1; 1224 1225 if (!atkbd || !drv) { 1226 dev_dbg(&serio->dev, 1227 "reconnect request, but serio is disconnected, ignoring...\n"); 1228 return -1; 1229 } 1230 1231 mutex_lock(&atkbd->mutex); 1232 1233 atkbd_disable(atkbd); 1234 1235 if (atkbd->write) { 1236 if (atkbd_probe(atkbd)) 1237 goto out; 1238 1239 if (atkbd->set != atkbd_select_set(atkbd, atkbd->set, atkbd->extra)) 1240 goto out; 1241 1242 /* 1243 * Restore LED state and repeat rate. While input core 1244 * will do this for us at resume time reconnect may happen 1245 * because user requested it via sysfs or simply because 1246 * keyboard was unplugged and plugged in again so we need 1247 * to do it ourselves here. 1248 */ 1249 atkbd_set_leds(atkbd); 1250 if (!atkbd->softrepeat) 1251 atkbd_set_repeat_rate(atkbd); 1252 1253 } 1254 1255 /* 1256 * Reset our state machine in case reconnect happened in the middle 1257 * of multi-byte scancode. 1258 */ 1259 atkbd->xl_bit = 0; 1260 atkbd->emul = 0; 1261 1262 atkbd_enable(atkbd); 1263 if (atkbd->write) 1264 atkbd_activate(atkbd); 1265 1266 retval = 0; 1267 1268 out: 1269 mutex_unlock(&atkbd->mutex); 1270 return retval; 1271} 1272 1273static struct serio_device_id atkbd_serio_ids[] = { 1274 { 1275 .type = SERIO_8042, 1276 .proto = SERIO_ANY, 1277 .id = SERIO_ANY, 1278 .extra = SERIO_ANY, 1279 }, 1280 { 1281 .type = SERIO_8042_XL, 1282 .proto = SERIO_ANY, 1283 .id = SERIO_ANY, 1284 .extra = SERIO_ANY, 1285 }, 1286 { 1287 .type = SERIO_RS232, 1288 .proto = SERIO_PS2SER, 1289 .id = SERIO_ANY, 1290 .extra = SERIO_ANY, 1291 }, 1292 { 0 } 1293}; 1294 1295MODULE_DEVICE_TABLE(serio, atkbd_serio_ids); 1296 1297static struct serio_driver atkbd_drv = { 1298 .driver = { 1299 .name = "atkbd", 1300 }, 1301 .description = DRIVER_DESC, 1302 .id_table = atkbd_serio_ids, 1303 .interrupt = atkbd_interrupt, 1304 .connect = atkbd_connect, 1305 .reconnect = atkbd_reconnect, 1306 .disconnect = atkbd_disconnect, 1307 .cleanup = atkbd_cleanup, 1308}; 1309 1310static ssize_t atkbd_attr_show_helper(struct device *dev, char *buf, 1311 ssize_t (*handler)(struct atkbd *, char *)) 1312{ 1313 struct serio *serio = to_serio_port(dev); 1314 struct atkbd *atkbd = serio_get_drvdata(serio); 1315 1316 return handler(atkbd, buf); 1317} 1318 1319static ssize_t atkbd_attr_set_helper(struct device *dev, const char *buf, size_t count, 1320 ssize_t (*handler)(struct atkbd *, const char *, size_t)) 1321{ 1322 struct serio *serio = to_serio_port(dev); 1323 struct atkbd *atkbd = serio_get_drvdata(serio); 1324 int retval; 1325 1326 retval = mutex_lock_interruptible(&atkbd->mutex); 1327 if (retval) 1328 return retval; 1329 1330 atkbd_disable(atkbd); 1331 retval = handler(atkbd, buf, count); 1332 atkbd_enable(atkbd); 1333 1334 mutex_unlock(&atkbd->mutex); 1335 1336 return retval; 1337} 1338 1339static ssize_t atkbd_show_extra(struct atkbd *atkbd, char *buf) 1340{ 1341 return sprintf(buf, "%d\n", atkbd->extra ? 1 : 0); 1342} 1343 1344static ssize_t atkbd_set_extra(struct atkbd *atkbd, const char *buf, size_t count) 1345{ 1346 struct input_dev *old_dev, *new_dev; 1347 unsigned int value; 1348 int err; 1349 bool old_extra; 1350 unsigned char old_set; 1351 1352 if (!atkbd->write) 1353 return -EIO; 1354 1355 err = kstrtouint(buf, 10, &value); 1356 if (err) 1357 return err; 1358 1359 if (value > 1) 1360 return -EINVAL; 1361 1362 if (atkbd->extra != value) { 1363 /* 1364 * Since device's properties will change we need to 1365 * unregister old device. But allocate and register 1366 * new one first to make sure we have it. 1367 */ 1368 old_dev = atkbd->dev; 1369 old_extra = atkbd->extra; 1370 old_set = atkbd->set; 1371 1372 new_dev = input_allocate_device(); 1373 if (!new_dev) 1374 return -ENOMEM; 1375 1376 atkbd->dev = new_dev; 1377 atkbd->set = atkbd_select_set(atkbd, atkbd->set, value); 1378 atkbd_reset_state(atkbd); 1379 atkbd_activate(atkbd); 1380 atkbd_set_keycode_table(atkbd); 1381 atkbd_set_device_attrs(atkbd); 1382 1383 err = input_register_device(atkbd->dev); 1384 if (err) { 1385 input_free_device(new_dev); 1386 1387 atkbd->dev = old_dev; 1388 atkbd->set = atkbd_select_set(atkbd, old_set, old_extra); 1389 atkbd_set_keycode_table(atkbd); 1390 atkbd_set_device_attrs(atkbd); 1391 1392 return err; 1393 } 1394 input_unregister_device(old_dev); 1395 1396 } 1397 return count; 1398} 1399 1400static ssize_t atkbd_show_force_release(struct atkbd *atkbd, char *buf) 1401{ 1402 size_t len = scnprintf(buf, PAGE_SIZE - 1, "%*pbl", 1403 ATKBD_KEYMAP_SIZE, atkbd->force_release_mask); 1404 1405 buf[len++] = '\n'; 1406 buf[len] = '\0'; 1407 1408 return len; 1409} 1410 1411static ssize_t atkbd_set_force_release(struct atkbd *atkbd, 1412 const char *buf, size_t count) 1413{ 1414 /* 64 bytes on stack should be acceptable */ 1415 DECLARE_BITMAP(new_mask, ATKBD_KEYMAP_SIZE); 1416 int err; 1417 1418 err = bitmap_parselist(buf, new_mask, ATKBD_KEYMAP_SIZE); 1419 if (err) 1420 return err; 1421 1422 memcpy(atkbd->force_release_mask, new_mask, sizeof(atkbd->force_release_mask)); 1423 return count; 1424} 1425 1426 1427static ssize_t atkbd_show_scroll(struct atkbd *atkbd, char *buf) 1428{ 1429 return sprintf(buf, "%d\n", atkbd->scroll ? 1 : 0); 1430} 1431 1432static ssize_t atkbd_set_scroll(struct atkbd *atkbd, const char *buf, size_t count) 1433{ 1434 struct input_dev *old_dev, *new_dev; 1435 unsigned int value; 1436 int err; 1437 bool old_scroll; 1438 1439 err = kstrtouint(buf, 10, &value); 1440 if (err) 1441 return err; 1442 1443 if (value > 1) 1444 return -EINVAL; 1445 1446 if (atkbd->scroll != value) { 1447 old_dev = atkbd->dev; 1448 old_scroll = atkbd->scroll; 1449 1450 new_dev = input_allocate_device(); 1451 if (!new_dev) 1452 return -ENOMEM; 1453 1454 atkbd->dev = new_dev; 1455 atkbd->scroll = value; 1456 atkbd_set_keycode_table(atkbd); 1457 atkbd_set_device_attrs(atkbd); 1458 1459 err = input_register_device(atkbd->dev); 1460 if (err) { 1461 input_free_device(new_dev); 1462 1463 atkbd->scroll = old_scroll; 1464 atkbd->dev = old_dev; 1465 atkbd_set_keycode_table(atkbd); 1466 atkbd_set_device_attrs(atkbd); 1467 1468 return err; 1469 } 1470 input_unregister_device(old_dev); 1471 } 1472 return count; 1473} 1474 1475static ssize_t atkbd_show_set(struct atkbd *atkbd, char *buf) 1476{ 1477 return sprintf(buf, "%d\n", atkbd->set); 1478} 1479 1480static ssize_t atkbd_set_set(struct atkbd *atkbd, const char *buf, size_t count) 1481{ 1482 struct input_dev *old_dev, *new_dev; 1483 unsigned int value; 1484 int err; 1485 unsigned char old_set; 1486 bool old_extra; 1487 1488 if (!atkbd->write) 1489 return -EIO; 1490 1491 err = kstrtouint(buf, 10, &value); 1492 if (err) 1493 return err; 1494 1495 if (value != 2 && value != 3) 1496 return -EINVAL; 1497 1498 if (atkbd->set != value) { 1499 old_dev = atkbd->dev; 1500 old_extra = atkbd->extra; 1501 old_set = atkbd->set; 1502 1503 new_dev = input_allocate_device(); 1504 if (!new_dev) 1505 return -ENOMEM; 1506 1507 atkbd->dev = new_dev; 1508 atkbd->set = atkbd_select_set(atkbd, value, atkbd->extra); 1509 atkbd_reset_state(atkbd); 1510 atkbd_activate(atkbd); 1511 atkbd_set_keycode_table(atkbd); 1512 atkbd_set_device_attrs(atkbd); 1513 1514 err = input_register_device(atkbd->dev); 1515 if (err) { 1516 input_free_device(new_dev); 1517 1518 atkbd->dev = old_dev; 1519 atkbd->set = atkbd_select_set(atkbd, old_set, old_extra); 1520 atkbd_set_keycode_table(atkbd); 1521 atkbd_set_device_attrs(atkbd); 1522 1523 return err; 1524 } 1525 input_unregister_device(old_dev); 1526 } 1527 return count; 1528} 1529 1530static ssize_t atkbd_show_softrepeat(struct atkbd *atkbd, char *buf) 1531{ 1532 return sprintf(buf, "%d\n", atkbd->softrepeat ? 1 : 0); 1533} 1534 1535static ssize_t atkbd_set_softrepeat(struct atkbd *atkbd, const char *buf, size_t count) 1536{ 1537 struct input_dev *old_dev, *new_dev; 1538 unsigned int value; 1539 int err; 1540 bool old_softrepeat, old_softraw; 1541 1542 if (!atkbd->write) 1543 return -EIO; 1544 1545 err = kstrtouint(buf, 10, &value); 1546 if (err) 1547 return err; 1548 1549 if (value > 1) 1550 return -EINVAL; 1551 1552 if (atkbd->softrepeat != value) { 1553 old_dev = atkbd->dev; 1554 old_softrepeat = atkbd->softrepeat; 1555 old_softraw = atkbd->softraw; 1556 1557 new_dev = input_allocate_device(); 1558 if (!new_dev) 1559 return -ENOMEM; 1560 1561 atkbd->dev = new_dev; 1562 atkbd->softrepeat = value; 1563 if (atkbd->softrepeat) 1564 atkbd->softraw = true; 1565 atkbd_set_device_attrs(atkbd); 1566 1567 err = input_register_device(atkbd->dev); 1568 if (err) { 1569 input_free_device(new_dev); 1570 1571 atkbd->dev = old_dev; 1572 atkbd->softrepeat = old_softrepeat; 1573 atkbd->softraw = old_softraw; 1574 atkbd_set_device_attrs(atkbd); 1575 1576 return err; 1577 } 1578 input_unregister_device(old_dev); 1579 } 1580 return count; 1581} 1582 1583 1584static ssize_t atkbd_show_softraw(struct atkbd *atkbd, char *buf) 1585{ 1586 return sprintf(buf, "%d\n", atkbd->softraw ? 1 : 0); 1587} 1588 1589static ssize_t atkbd_set_softraw(struct atkbd *atkbd, const char *buf, size_t count) 1590{ 1591 struct input_dev *old_dev, *new_dev; 1592 unsigned int value; 1593 int err; 1594 bool old_softraw; 1595 1596 err = kstrtouint(buf, 10, &value); 1597 if (err) 1598 return err; 1599 1600 if (value > 1) 1601 return -EINVAL; 1602 1603 if (atkbd->softraw != value) { 1604 old_dev = atkbd->dev; 1605 old_softraw = atkbd->softraw; 1606 1607 new_dev = input_allocate_device(); 1608 if (!new_dev) 1609 return -ENOMEM; 1610 1611 atkbd->dev = new_dev; 1612 atkbd->softraw = value; 1613 atkbd_set_device_attrs(atkbd); 1614 1615 err = input_register_device(atkbd->dev); 1616 if (err) { 1617 input_free_device(new_dev); 1618 1619 atkbd->dev = old_dev; 1620 atkbd->softraw = old_softraw; 1621 atkbd_set_device_attrs(atkbd); 1622 1623 return err; 1624 } 1625 input_unregister_device(old_dev); 1626 } 1627 return count; 1628} 1629 1630static ssize_t atkbd_show_err_count(struct atkbd *atkbd, char *buf) 1631{ 1632 return sprintf(buf, "%lu\n", atkbd->err_count); 1633} 1634 1635static int __init atkbd_setup_forced_release(const struct dmi_system_id *id) 1636{ 1637 atkbd_platform_fixup = atkbd_apply_forced_release_keylist; 1638 atkbd_platform_fixup_data = id->driver_data; 1639 1640 return 1; 1641} 1642 1643static int __init atkbd_setup_scancode_fixup(const struct dmi_system_id *id) 1644{ 1645 atkbd_platform_scancode_fixup = id->driver_data; 1646 1647 return 1; 1648} 1649 1650static int __init atkbd_deactivate_fixup(const struct dmi_system_id *id) 1651{ 1652 atkbd_skip_deactivate = true; 1653 return 1; 1654} 1655 1656/* 1657 * NOTE: do not add any more "force release" quirks to this table. The 1658 * task of adjusting list of keys that should be "released" automatically 1659 * by the driver is now delegated to userspace tools, such as udev, so 1660 * submit such quirks there. 1661 */ 1662static const struct dmi_system_id atkbd_dmi_quirk_table[] __initconst = { 1663 { 1664 .matches = { 1665 DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."), 1666 DMI_MATCH(DMI_CHASSIS_TYPE, "8"), /* Portable */ 1667 }, 1668 .callback = atkbd_setup_forced_release, 1669 .driver_data = atkbd_dell_laptop_forced_release_keys, 1670 }, 1671 { 1672 .matches = { 1673 DMI_MATCH(DMI_SYS_VENDOR, "Dell Computer Corporation"), 1674 DMI_MATCH(DMI_CHASSIS_TYPE, "8"), /* Portable */ 1675 }, 1676 .callback = atkbd_setup_forced_release, 1677 .driver_data = atkbd_dell_laptop_forced_release_keys, 1678 }, 1679 { 1680 .matches = { 1681 DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"), 1682 DMI_MATCH(DMI_PRODUCT_NAME, "HP 2133"), 1683 }, 1684 .callback = atkbd_setup_forced_release, 1685 .driver_data = atkbd_hp_forced_release_keys, 1686 }, 1687 { 1688 .matches = { 1689 DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"), 1690 DMI_MATCH(DMI_PRODUCT_NAME, "Pavilion ZV6100"), 1691 }, 1692 .callback = atkbd_setup_forced_release, 1693 .driver_data = atkbd_volume_forced_release_keys, 1694 }, 1695 { 1696 .matches = { 1697 DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"), 1698 DMI_MATCH(DMI_PRODUCT_NAME, "Presario R4000"), 1699 }, 1700 .callback = atkbd_setup_forced_release, 1701 .driver_data = atkbd_volume_forced_release_keys, 1702 }, 1703 { 1704 .matches = { 1705 DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"), 1706 DMI_MATCH(DMI_PRODUCT_NAME, "Presario R4100"), 1707 }, 1708 .callback = atkbd_setup_forced_release, 1709 .driver_data = atkbd_volume_forced_release_keys, 1710 }, 1711 { 1712 .matches = { 1713 DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"), 1714 DMI_MATCH(DMI_PRODUCT_NAME, "Presario R4200"), 1715 }, 1716 .callback = atkbd_setup_forced_release, 1717 .driver_data = atkbd_volume_forced_release_keys, 1718 }, 1719 { 1720 /* Inventec Symphony */ 1721 .matches = { 1722 DMI_MATCH(DMI_SYS_VENDOR, "INVENTEC"), 1723 DMI_MATCH(DMI_PRODUCT_NAME, "SYMPHONY 6.0/7.0"), 1724 }, 1725 .callback = atkbd_setup_forced_release, 1726 .driver_data = atkbd_volume_forced_release_keys, 1727 }, 1728 { 1729 /* Samsung NC10 */ 1730 .matches = { 1731 DMI_MATCH(DMI_SYS_VENDOR, "SAMSUNG ELECTRONICS CO., LTD."), 1732 DMI_MATCH(DMI_PRODUCT_NAME, "NC10"), 1733 }, 1734 .callback = atkbd_setup_forced_release, 1735 .driver_data = atkbd_samsung_forced_release_keys, 1736 }, 1737 { 1738 /* Samsung NC20 */ 1739 .matches = { 1740 DMI_MATCH(DMI_SYS_VENDOR, "SAMSUNG ELECTRONICS CO., LTD."), 1741 DMI_MATCH(DMI_PRODUCT_NAME, "NC20"), 1742 }, 1743 .callback = atkbd_setup_forced_release, 1744 .driver_data = atkbd_samsung_forced_release_keys, 1745 }, 1746 { 1747 /* Samsung SQ45S70S */ 1748 .matches = { 1749 DMI_MATCH(DMI_SYS_VENDOR, "SAMSUNG ELECTRONICS CO., LTD."), 1750 DMI_MATCH(DMI_PRODUCT_NAME, "SQ45S70S"), 1751 }, 1752 .callback = atkbd_setup_forced_release, 1753 .driver_data = atkbd_samsung_forced_release_keys, 1754 }, 1755 { 1756 /* Fujitsu Amilo PA 1510 */ 1757 .matches = { 1758 DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU SIEMENS"), 1759 DMI_MATCH(DMI_PRODUCT_NAME, "AMILO Pa 1510"), 1760 }, 1761 .callback = atkbd_setup_forced_release, 1762 .driver_data = atkbd_volume_forced_release_keys, 1763 }, 1764 { 1765 /* Fujitsu Amilo Pi 3525 */ 1766 .matches = { 1767 DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU SIEMENS"), 1768 DMI_MATCH(DMI_PRODUCT_NAME, "AMILO Pi 3525"), 1769 }, 1770 .callback = atkbd_setup_forced_release, 1771 .driver_data = atkbd_amilo_pi3525_forced_release_keys, 1772 }, 1773 { 1774 /* Fujitsu Amilo Xi 3650 */ 1775 .matches = { 1776 DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU SIEMENS"), 1777 DMI_MATCH(DMI_PRODUCT_NAME, "AMILO Xi 3650"), 1778 }, 1779 .callback = atkbd_setup_forced_release, 1780 .driver_data = atkbd_amilo_xi3650_forced_release_keys, 1781 }, 1782 { 1783 .matches = { 1784 DMI_MATCH(DMI_SYS_VENDOR, "Soltech Corporation"), 1785 DMI_MATCH(DMI_PRODUCT_NAME, "TA12"), 1786 }, 1787 .callback = atkbd_setup_forced_release, 1788 .driver_data = atkdb_soltech_ta12_forced_release_keys, 1789 }, 1790 { 1791 /* OQO Model 01+ */ 1792 .matches = { 1793 DMI_MATCH(DMI_SYS_VENDOR, "OQO"), 1794 DMI_MATCH(DMI_PRODUCT_NAME, "ZEPTO"), 1795 }, 1796 .callback = atkbd_setup_scancode_fixup, 1797 .driver_data = atkbd_oqo_01plus_scancode_fixup, 1798 }, 1799 { 1800 .matches = { 1801 DMI_MATCH(DMI_SYS_VENDOR, "LG Electronics"), 1802 }, 1803 .callback = atkbd_deactivate_fixup, 1804 }, 1805 { } 1806}; 1807 1808static int __init atkbd_init(void) 1809{ 1810 dmi_check_system(atkbd_dmi_quirk_table); 1811 1812 return serio_register_driver(&atkbd_drv); 1813} 1814 1815static void __exit atkbd_exit(void) 1816{ 1817 serio_unregister_driver(&atkbd_drv); 1818} 1819 1820module_init(atkbd_init); 1821module_exit(atkbd_exit); 1822