1/* 2 * GSPCA Endpoints (formerly known as AOX) se401 USB Camera sub Driver 3 * 4 * Copyright (C) 2011 Hans de Goede <hdegoede@redhat.com> 5 * 6 * Based on the v4l1 se401 driver which is: 7 * 8 * Copyright (c) 2000 Jeroen B. Vreeken (pe1rxq@amsat.org) 9 * 10 * This program is free software; you can redistribute it and/or modify 11 * it under the terms of the GNU General Public License as published by 12 * the Free Software Foundation; either version 2 of the License, or 13 * (at your option) any later version. 14 * 15 * This program is distributed in the hope that it will be useful, 16 * but WITHOUT ANY WARRANTY; without even the implied warranty of 17 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 18 * GNU General Public License for more details. 19 * 20 * You should have received a copy of the GNU General Public License 21 * along with this program; if not, write to the Free Software 22 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA 23 * 24 */ 25 26#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt 27 28#define MODULE_NAME "se401" 29 30#define BULK_SIZE 4096 31#define PACKET_SIZE 1024 32#define READ_REQ_SIZE 64 33#define MAX_MODES ((READ_REQ_SIZE - 6) / 4) 34/* The se401 compression algorithm uses a fixed quant factor, which 35 can be configured by setting the high nibble of the SE401_OPERATINGMODE 36 feature. This needs to exactly match what is in libv4l! */ 37#define SE401_QUANT_FACT 8 38 39#include <linux/input.h> 40#include <linux/slab.h> 41#include "gspca.h" 42#include "se401.h" 43 44MODULE_AUTHOR("Hans de Goede <hdegoede@redhat.com>"); 45MODULE_DESCRIPTION("Endpoints se401"); 46MODULE_LICENSE("GPL"); 47 48/* exposure change state machine states */ 49enum { 50 EXPO_CHANGED, 51 EXPO_DROP_FRAME, 52 EXPO_NO_CHANGE, 53}; 54 55/* specific webcam descriptor */ 56struct sd { 57 struct gspca_dev gspca_dev; /* !! must be the first item */ 58 struct { /* exposure/freq control cluster */ 59 struct v4l2_ctrl *exposure; 60 struct v4l2_ctrl *freq; 61 }; 62 bool has_brightness; 63 struct v4l2_pix_format fmts[MAX_MODES]; 64 int pixels_read; 65 int packet_read; 66 u8 packet[PACKET_SIZE]; 67 u8 restart_stream; 68 u8 button_state; 69 u8 resetlevel; 70 u8 resetlevel_frame_count; 71 int resetlevel_adjust_dir; 72 int expo_change_state; 73}; 74 75 76static void se401_write_req(struct gspca_dev *gspca_dev, u16 req, u16 value, 77 int silent) 78{ 79 int err; 80 81 if (gspca_dev->usb_err < 0) 82 return; 83 84 err = usb_control_msg(gspca_dev->dev, 85 usb_sndctrlpipe(gspca_dev->dev, 0), req, 86 USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE, 87 value, 0, NULL, 0, 1000); 88 if (err < 0) { 89 if (!silent) 90 pr_err("write req failed req %#04x val %#04x error %d\n", 91 req, value, err); 92 gspca_dev->usb_err = err; 93 } 94} 95 96static void se401_read_req(struct gspca_dev *gspca_dev, u16 req, int silent) 97{ 98 int err; 99 100 if (gspca_dev->usb_err < 0) 101 return; 102 103 if (USB_BUF_SZ < READ_REQ_SIZE) { 104 pr_err("USB_BUF_SZ too small!!\n"); 105 gspca_dev->usb_err = -ENOBUFS; 106 return; 107 } 108 109 err = usb_control_msg(gspca_dev->dev, 110 usb_rcvctrlpipe(gspca_dev->dev, 0), req, 111 USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE, 112 0, 0, gspca_dev->usb_buf, READ_REQ_SIZE, 1000); 113 if (err < 0) { 114 if (!silent) 115 pr_err("read req failed req %#04x error %d\n", 116 req, err); 117 gspca_dev->usb_err = err; 118 } 119} 120 121static void se401_set_feature(struct gspca_dev *gspca_dev, 122 u16 selector, u16 param) 123{ 124 int err; 125 126 if (gspca_dev->usb_err < 0) 127 return; 128 129 err = usb_control_msg(gspca_dev->dev, 130 usb_sndctrlpipe(gspca_dev->dev, 0), 131 SE401_REQ_SET_EXT_FEATURE, 132 USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE, 133 param, selector, NULL, 0, 1000); 134 if (err < 0) { 135 pr_err("set feature failed sel %#04x param %#04x error %d\n", 136 selector, param, err); 137 gspca_dev->usb_err = err; 138 } 139} 140 141static int se401_get_feature(struct gspca_dev *gspca_dev, u16 selector) 142{ 143 int err; 144 145 if (gspca_dev->usb_err < 0) 146 return gspca_dev->usb_err; 147 148 if (USB_BUF_SZ < 2) { 149 pr_err("USB_BUF_SZ too small!!\n"); 150 gspca_dev->usb_err = -ENOBUFS; 151 return gspca_dev->usb_err; 152 } 153 154 err = usb_control_msg(gspca_dev->dev, 155 usb_rcvctrlpipe(gspca_dev->dev, 0), 156 SE401_REQ_GET_EXT_FEATURE, 157 USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE, 158 0, selector, gspca_dev->usb_buf, 2, 1000); 159 if (err < 0) { 160 pr_err("get feature failed sel %#04x error %d\n", 161 selector, err); 162 gspca_dev->usb_err = err; 163 return err; 164 } 165 return gspca_dev->usb_buf[0] | (gspca_dev->usb_buf[1] << 8); 166} 167 168static void setbrightness(struct gspca_dev *gspca_dev, s32 val) 169{ 170 /* HDG: this does not seem to do anything on my cam */ 171 se401_write_req(gspca_dev, SE401_REQ_SET_BRT, val, 0); 172} 173 174static void setgain(struct gspca_dev *gspca_dev, s32 val) 175{ 176 u16 gain = 63 - val; 177 178 /* red color gain */ 179 se401_set_feature(gspca_dev, HV7131_REG_ARCG, gain); 180 /* green color gain */ 181 se401_set_feature(gspca_dev, HV7131_REG_AGCG, gain); 182 /* blue color gain */ 183 se401_set_feature(gspca_dev, HV7131_REG_ABCG, gain); 184} 185 186static void setexposure(struct gspca_dev *gspca_dev, s32 val, s32 freq) 187{ 188 struct sd *sd = (struct sd *) gspca_dev; 189 int integration = val << 6; 190 u8 expose_h, expose_m, expose_l; 191 192 /* Do this before the set_feature calls, for proper timing wrt 193 the interrupt driven pkt_scan. Note we may still race but that 194 is not a big issue, the expo change state machine is merely for 195 avoiding underexposed frames getting send out, if one sneaks 196 through so be it */ 197 sd->expo_change_state = EXPO_CHANGED; 198 199 if (freq == V4L2_CID_POWER_LINE_FREQUENCY_50HZ) 200 integration = integration - integration % 106667; 201 if (freq == V4L2_CID_POWER_LINE_FREQUENCY_60HZ) 202 integration = integration - integration % 88889; 203 204 expose_h = (integration >> 16); 205 expose_m = (integration >> 8); 206 expose_l = integration; 207 208 /* integration time low */ 209 se401_set_feature(gspca_dev, HV7131_REG_TITL, expose_l); 210 /* integration time mid */ 211 se401_set_feature(gspca_dev, HV7131_REG_TITM, expose_m); 212 /* integration time high */ 213 se401_set_feature(gspca_dev, HV7131_REG_TITU, expose_h); 214} 215 216static int sd_config(struct gspca_dev *gspca_dev, 217 const struct usb_device_id *id) 218{ 219 struct sd *sd = (struct sd *)gspca_dev; 220 struct cam *cam = &gspca_dev->cam; 221 u8 *cd = gspca_dev->usb_buf; 222 int i, j, n; 223 int widths[MAX_MODES], heights[MAX_MODES]; 224 225 /* Read the camera descriptor */ 226 se401_read_req(gspca_dev, SE401_REQ_GET_CAMERA_DESCRIPTOR, 1); 227 if (gspca_dev->usb_err) { 228 /* Sometimes after being idle for a while the se401 won't 229 respond and needs a good kicking */ 230 usb_reset_device(gspca_dev->dev); 231 gspca_dev->usb_err = 0; 232 se401_read_req(gspca_dev, SE401_REQ_GET_CAMERA_DESCRIPTOR, 0); 233 } 234 235 /* Some cameras start with their LED on */ 236 se401_write_req(gspca_dev, SE401_REQ_LED_CONTROL, 0, 0); 237 if (gspca_dev->usb_err) 238 return gspca_dev->usb_err; 239 240 if (cd[1] != 0x41) { 241 pr_err("Wrong descriptor type\n"); 242 return -ENODEV; 243 } 244 245 if (!(cd[2] & SE401_FORMAT_BAYER)) { 246 pr_err("Bayer format not supported!\n"); 247 return -ENODEV; 248 } 249 250 if (cd[3]) 251 pr_info("ExtraFeatures: %d\n", cd[3]); 252 253 n = cd[4] | (cd[5] << 8); 254 if (n > MAX_MODES) { 255 pr_err("Too many frame sizes\n"); 256 return -ENODEV; 257 } 258 259 for (i = 0; i < n ; i++) { 260 widths[i] = cd[6 + i * 4 + 0] | (cd[6 + i * 4 + 1] << 8); 261 heights[i] = cd[6 + i * 4 + 2] | (cd[6 + i * 4 + 3] << 8); 262 } 263 264 for (i = 0; i < n ; i++) { 265 sd->fmts[i].width = widths[i]; 266 sd->fmts[i].height = heights[i]; 267 sd->fmts[i].field = V4L2_FIELD_NONE; 268 sd->fmts[i].colorspace = V4L2_COLORSPACE_SRGB; 269 sd->fmts[i].priv = 1; 270 271 /* janggu compression only works for 1/4th or 1/16th res */ 272 for (j = 0; j < n; j++) { 273 if (widths[j] / 2 == widths[i] && 274 heights[j] / 2 == heights[i]) { 275 sd->fmts[i].priv = 2; 276 break; 277 } 278 } 279 /* 1/16th if available too is better then 1/4th, because 280 we then use a larger area of the sensor */ 281 for (j = 0; j < n; j++) { 282 if (widths[j] / 4 == widths[i] && 283 heights[j] / 4 == heights[i]) { 284 sd->fmts[i].priv = 4; 285 break; 286 } 287 } 288 289 if (sd->fmts[i].priv == 1) { 290 /* Not a 1/4th or 1/16th res, use bayer */ 291 sd->fmts[i].pixelformat = V4L2_PIX_FMT_SBGGR8; 292 sd->fmts[i].bytesperline = widths[i]; 293 sd->fmts[i].sizeimage = widths[i] * heights[i]; 294 pr_info("Frame size: %dx%d bayer\n", 295 widths[i], heights[i]); 296 } else { 297 /* Found a match use janggu compression */ 298 sd->fmts[i].pixelformat = V4L2_PIX_FMT_SE401; 299 sd->fmts[i].bytesperline = 0; 300 sd->fmts[i].sizeimage = widths[i] * heights[i] * 3; 301 pr_info("Frame size: %dx%d 1/%dth janggu\n", 302 widths[i], heights[i], 303 sd->fmts[i].priv * sd->fmts[i].priv); 304 } 305 } 306 307 cam->cam_mode = sd->fmts; 308 cam->nmodes = n; 309 cam->bulk = 1; 310 cam->bulk_size = BULK_SIZE; 311 cam->bulk_nurbs = 4; 312 sd->resetlevel = 0x2d; /* Set initial resetlevel */ 313 314 /* See if the camera supports brightness */ 315 se401_read_req(gspca_dev, SE401_REQ_GET_BRT, 1); 316 sd->has_brightness = !!gspca_dev->usb_err; 317 gspca_dev->usb_err = 0; 318 319 return 0; 320} 321 322/* this function is called at probe and resume time */ 323static int sd_init(struct gspca_dev *gspca_dev) 324{ 325 return 0; 326} 327 328/* function called at start time before URB creation */ 329static int sd_isoc_init(struct gspca_dev *gspca_dev) 330{ 331 gspca_dev->alt = 1; /* Ignore the bogus isoc alt settings */ 332 333 return gspca_dev->usb_err; 334} 335 336/* -- start the camera -- */ 337static int sd_start(struct gspca_dev *gspca_dev) 338{ 339 struct sd *sd = (struct sd *)gspca_dev; 340 int mult = gspca_dev->cam.cam_mode[gspca_dev->curr_mode].priv; 341 int mode = 0; 342 343 se401_write_req(gspca_dev, SE401_REQ_CAMERA_POWER, 1, 1); 344 if (gspca_dev->usb_err) { 345 /* Sometimes after being idle for a while the se401 won't 346 respond and needs a good kicking */ 347 usb_reset_device(gspca_dev->dev); 348 gspca_dev->usb_err = 0; 349 se401_write_req(gspca_dev, SE401_REQ_CAMERA_POWER, 1, 0); 350 } 351 se401_write_req(gspca_dev, SE401_REQ_LED_CONTROL, 1, 0); 352 353 se401_set_feature(gspca_dev, HV7131_REG_MODE_B, 0x05); 354 355 /* set size + mode */ 356 se401_write_req(gspca_dev, SE401_REQ_SET_WIDTH, 357 gspca_dev->pixfmt.width * mult, 0); 358 se401_write_req(gspca_dev, SE401_REQ_SET_HEIGHT, 359 gspca_dev->pixfmt.height * mult, 0); 360 /* 361 * HDG: disabled this as it does not seem to do anything 362 * se401_write_req(gspca_dev, SE401_REQ_SET_OUTPUT_MODE, 363 * SE401_FORMAT_BAYER, 0); 364 */ 365 366 switch (mult) { 367 case 1: /* Raw bayer */ 368 mode = 0x03; break; 369 case 2: /* 1/4th janggu */ 370 mode = SE401_QUANT_FACT << 4; break; 371 case 4: /* 1/16th janggu */ 372 mode = (SE401_QUANT_FACT << 4) | 0x02; break; 373 } 374 se401_set_feature(gspca_dev, SE401_OPERATINGMODE, mode); 375 376 se401_set_feature(gspca_dev, HV7131_REG_ARLV, sd->resetlevel); 377 378 sd->packet_read = 0; 379 sd->pixels_read = 0; 380 sd->restart_stream = 0; 381 sd->resetlevel_frame_count = 0; 382 sd->resetlevel_adjust_dir = 0; 383 sd->expo_change_state = EXPO_NO_CHANGE; 384 385 se401_write_req(gspca_dev, SE401_REQ_START_CONTINUOUS_CAPTURE, 0, 0); 386 387 return gspca_dev->usb_err; 388} 389 390static void sd_stopN(struct gspca_dev *gspca_dev) 391{ 392 se401_write_req(gspca_dev, SE401_REQ_STOP_CONTINUOUS_CAPTURE, 0, 0); 393 se401_write_req(gspca_dev, SE401_REQ_LED_CONTROL, 0, 0); 394 se401_write_req(gspca_dev, SE401_REQ_CAMERA_POWER, 0, 0); 395} 396 397static void sd_dq_callback(struct gspca_dev *gspca_dev) 398{ 399 struct sd *sd = (struct sd *)gspca_dev; 400 unsigned int ahrc, alrc; 401 int oldreset, adjust_dir; 402 403 /* Restart the stream if requested do so by pkt_scan */ 404 if (sd->restart_stream) { 405 sd_stopN(gspca_dev); 406 sd_start(gspca_dev); 407 sd->restart_stream = 0; 408 } 409 410 /* Automatically adjust sensor reset level 411 Hyundai have some really nice docs about this and other sensor 412 related stuff on their homepage: www.hei.co.kr */ 413 sd->resetlevel_frame_count++; 414 if (sd->resetlevel_frame_count < 20) 415 return; 416 417 /* For some reason this normally read-only register doesn't get reset 418 to zero after reading them just once... */ 419 se401_get_feature(gspca_dev, HV7131_REG_HIREFNOH); 420 se401_get_feature(gspca_dev, HV7131_REG_HIREFNOL); 421 se401_get_feature(gspca_dev, HV7131_REG_LOREFNOH); 422 se401_get_feature(gspca_dev, HV7131_REG_LOREFNOL); 423 ahrc = 256*se401_get_feature(gspca_dev, HV7131_REG_HIREFNOH) + 424 se401_get_feature(gspca_dev, HV7131_REG_HIREFNOL); 425 alrc = 256*se401_get_feature(gspca_dev, HV7131_REG_LOREFNOH) + 426 se401_get_feature(gspca_dev, HV7131_REG_LOREFNOL); 427 428 /* Not an exact science, but it seems to work pretty well... */ 429 oldreset = sd->resetlevel; 430 if (alrc > 10) { 431 while (alrc >= 10 && sd->resetlevel < 63) { 432 sd->resetlevel++; 433 alrc /= 2; 434 } 435 } else if (ahrc > 20) { 436 while (ahrc >= 20 && sd->resetlevel > 0) { 437 sd->resetlevel--; 438 ahrc /= 2; 439 } 440 } 441 /* Detect ping-pong-ing and halve adjustment to avoid overshoot */ 442 if (sd->resetlevel > oldreset) 443 adjust_dir = 1; 444 else 445 adjust_dir = -1; 446 if (sd->resetlevel_adjust_dir && 447 sd->resetlevel_adjust_dir != adjust_dir) 448 sd->resetlevel = oldreset + (sd->resetlevel - oldreset) / 2; 449 450 if (sd->resetlevel != oldreset) { 451 sd->resetlevel_adjust_dir = adjust_dir; 452 se401_set_feature(gspca_dev, HV7131_REG_ARLV, sd->resetlevel); 453 } 454 455 sd->resetlevel_frame_count = 0; 456} 457 458static void sd_complete_frame(struct gspca_dev *gspca_dev, u8 *data, int len) 459{ 460 struct sd *sd = (struct sd *)gspca_dev; 461 462 switch (sd->expo_change_state) { 463 case EXPO_CHANGED: 464 /* The exposure was changed while this frame 465 was being send, so this frame is ok */ 466 sd->expo_change_state = EXPO_DROP_FRAME; 467 break; 468 case EXPO_DROP_FRAME: 469 /* The exposure was changed while this frame 470 was being captured, drop it! */ 471 gspca_dev->last_packet_type = DISCARD_PACKET; 472 sd->expo_change_state = EXPO_NO_CHANGE; 473 break; 474 case EXPO_NO_CHANGE: 475 break; 476 } 477 gspca_frame_add(gspca_dev, LAST_PACKET, data, len); 478} 479 480static void sd_pkt_scan_janggu(struct gspca_dev *gspca_dev, u8 *data, int len) 481{ 482 struct sd *sd = (struct sd *)gspca_dev; 483 int imagesize = gspca_dev->pixfmt.width * gspca_dev->pixfmt.height; 484 int i, plen, bits, pixels, info, count; 485 486 if (sd->restart_stream) 487 return; 488 489 /* Sometimes a 1024 bytes garbage bulk packet is send between frames */ 490 if (gspca_dev->last_packet_type == LAST_PACKET && len == 1024) { 491 gspca_dev->last_packet_type = DISCARD_PACKET; 492 return; 493 } 494 495 i = 0; 496 while (i < len) { 497 /* Read header if not already be present from prev bulk pkt */ 498 if (sd->packet_read < 4) { 499 count = 4 - sd->packet_read; 500 if (count > len - i) 501 count = len - i; 502 memcpy(&sd->packet[sd->packet_read], &data[i], count); 503 sd->packet_read += count; 504 i += count; 505 if (sd->packet_read < 4) 506 break; 507 } 508 bits = sd->packet[3] + (sd->packet[2] << 8); 509 pixels = sd->packet[1] + ((sd->packet[0] & 0x3f) << 8); 510 info = (sd->packet[0] & 0xc0) >> 6; 511 plen = ((bits + 47) >> 4) << 1; 512 /* Sanity checks */ 513 if (plen > 1024) { 514 pr_err("invalid packet len %d restarting stream\n", 515 plen); 516 goto error; 517 } 518 if (info == 3) { 519 pr_err("unknown frame info value restarting stream\n"); 520 goto error; 521 } 522 523 /* Read (remainder of) packet contents */ 524 count = plen - sd->packet_read; 525 if (count > len - i) 526 count = len - i; 527 memcpy(&sd->packet[sd->packet_read], &data[i], count); 528 sd->packet_read += count; 529 i += count; 530 if (sd->packet_read < plen) 531 break; 532 533 sd->pixels_read += pixels; 534 sd->packet_read = 0; 535 536 switch (info) { 537 case 0: /* Frame data */ 538 gspca_frame_add(gspca_dev, INTER_PACKET, sd->packet, 539 plen); 540 break; 541 case 1: /* EOF */ 542 if (sd->pixels_read != imagesize) { 543 pr_err("frame size %d expected %d\n", 544 sd->pixels_read, imagesize); 545 goto error; 546 } 547 sd_complete_frame(gspca_dev, sd->packet, plen); 548 return; /* Discard the rest of the bulk packet !! */ 549 case 2: /* SOF */ 550 gspca_frame_add(gspca_dev, FIRST_PACKET, sd->packet, 551 plen); 552 sd->pixels_read = pixels; 553 break; 554 } 555 } 556 return; 557 558error: 559 sd->restart_stream = 1; 560 /* Give userspace a 0 bytes frame, so our dq callback gets 561 called and it can restart the stream */ 562 gspca_frame_add(gspca_dev, FIRST_PACKET, NULL, 0); 563 gspca_frame_add(gspca_dev, LAST_PACKET, NULL, 0); 564} 565 566static void sd_pkt_scan_bayer(struct gspca_dev *gspca_dev, u8 *data, int len) 567{ 568 struct cam *cam = &gspca_dev->cam; 569 int imagesize = cam->cam_mode[gspca_dev->curr_mode].sizeimage; 570 571 if (gspca_dev->image_len == 0) { 572 gspca_frame_add(gspca_dev, FIRST_PACKET, data, len); 573 return; 574 } 575 576 if (gspca_dev->image_len + len >= imagesize) { 577 sd_complete_frame(gspca_dev, data, len); 578 return; 579 } 580 581 gspca_frame_add(gspca_dev, INTER_PACKET, data, len); 582} 583 584static void sd_pkt_scan(struct gspca_dev *gspca_dev, u8 *data, int len) 585{ 586 int mult = gspca_dev->cam.cam_mode[gspca_dev->curr_mode].priv; 587 588 if (len == 0) 589 return; 590 591 if (mult == 1) /* mult == 1 means raw bayer */ 592 sd_pkt_scan_bayer(gspca_dev, data, len); 593 else 594 sd_pkt_scan_janggu(gspca_dev, data, len); 595} 596 597#if IS_ENABLED(CONFIG_INPUT) 598static int sd_int_pkt_scan(struct gspca_dev *gspca_dev, u8 *data, int len) 599{ 600 struct sd *sd = (struct sd *)gspca_dev; 601 u8 state; 602 603 if (len != 2) 604 return -EINVAL; 605 606 switch (data[0]) { 607 case 0: 608 case 1: 609 state = data[0]; 610 break; 611 default: 612 return -EINVAL; 613 } 614 if (sd->button_state != state) { 615 input_report_key(gspca_dev->input_dev, KEY_CAMERA, state); 616 input_sync(gspca_dev->input_dev); 617 sd->button_state = state; 618 } 619 620 return 0; 621} 622#endif 623 624static int sd_s_ctrl(struct v4l2_ctrl *ctrl) 625{ 626 struct gspca_dev *gspca_dev = 627 container_of(ctrl->handler, struct gspca_dev, ctrl_handler); 628 struct sd *sd = (struct sd *)gspca_dev; 629 630 gspca_dev->usb_err = 0; 631 632 if (!gspca_dev->streaming) 633 return 0; 634 635 switch (ctrl->id) { 636 case V4L2_CID_BRIGHTNESS: 637 setbrightness(gspca_dev, ctrl->val); 638 break; 639 case V4L2_CID_GAIN: 640 setgain(gspca_dev, ctrl->val); 641 break; 642 case V4L2_CID_EXPOSURE: 643 setexposure(gspca_dev, ctrl->val, sd->freq->val); 644 break; 645 } 646 return gspca_dev->usb_err; 647} 648 649static const struct v4l2_ctrl_ops sd_ctrl_ops = { 650 .s_ctrl = sd_s_ctrl, 651}; 652 653static int sd_init_controls(struct gspca_dev *gspca_dev) 654{ 655 struct sd *sd = (struct sd *)gspca_dev; 656 struct v4l2_ctrl_handler *hdl = &gspca_dev->ctrl_handler; 657 658 gspca_dev->vdev.ctrl_handler = hdl; 659 v4l2_ctrl_handler_init(hdl, 4); 660 if (sd->has_brightness) 661 v4l2_ctrl_new_std(hdl, &sd_ctrl_ops, 662 V4L2_CID_BRIGHTNESS, 0, 255, 1, 15); 663 /* max is really 63 but > 50 is not pretty */ 664 v4l2_ctrl_new_std(hdl, &sd_ctrl_ops, 665 V4L2_CID_GAIN, 0, 50, 1, 25); 666 sd->exposure = v4l2_ctrl_new_std(hdl, &sd_ctrl_ops, 667 V4L2_CID_EXPOSURE, 0, 32767, 1, 15000); 668 sd->freq = v4l2_ctrl_new_std_menu(hdl, &sd_ctrl_ops, 669 V4L2_CID_POWER_LINE_FREQUENCY, 670 V4L2_CID_POWER_LINE_FREQUENCY_60HZ, 0, 0); 671 672 if (hdl->error) { 673 pr_err("Could not initialize controls\n"); 674 return hdl->error; 675 } 676 v4l2_ctrl_cluster(2, &sd->exposure); 677 return 0; 678} 679 680/* sub-driver description */ 681static const struct sd_desc sd_desc = { 682 .name = MODULE_NAME, 683 .config = sd_config, 684 .init = sd_init, 685 .init_controls = sd_init_controls, 686 .isoc_init = sd_isoc_init, 687 .start = sd_start, 688 .stopN = sd_stopN, 689 .dq_callback = sd_dq_callback, 690 .pkt_scan = sd_pkt_scan, 691#if IS_ENABLED(CONFIG_INPUT) 692 .int_pkt_scan = sd_int_pkt_scan, 693#endif 694}; 695 696/* -- module initialisation -- */ 697static const struct usb_device_id device_table[] = { 698 {USB_DEVICE(0x03e8, 0x0004)}, /* Endpoints/Aox SE401 */ 699 {USB_DEVICE(0x0471, 0x030b)}, /* Philips PCVC665K */ 700 {USB_DEVICE(0x047d, 0x5001)}, /* Kensington 67014 */ 701 {USB_DEVICE(0x047d, 0x5002)}, /* Kensington 6701(5/7) */ 702 {USB_DEVICE(0x047d, 0x5003)}, /* Kensington 67016 */ 703 {} 704}; 705MODULE_DEVICE_TABLE(usb, device_table); 706 707/* -- device connect -- */ 708static int sd_probe(struct usb_interface *intf, 709 const struct usb_device_id *id) 710{ 711 return gspca_dev_probe(intf, id, &sd_desc, sizeof(struct sd), 712 THIS_MODULE); 713} 714 715static int sd_pre_reset(struct usb_interface *intf) 716{ 717 return 0; 718} 719 720static int sd_post_reset(struct usb_interface *intf) 721{ 722 return 0; 723} 724 725static struct usb_driver sd_driver = { 726 .name = MODULE_NAME, 727 .id_table = device_table, 728 .probe = sd_probe, 729 .disconnect = gspca_disconnect, 730#ifdef CONFIG_PM 731 .suspend = gspca_suspend, 732 .resume = gspca_resume, 733 .reset_resume = gspca_resume, 734#endif 735 .pre_reset = sd_pre_reset, 736 .post_reset = sd_post_reset, 737}; 738 739module_usb_driver(sd_driver); 740