1/*******************************************************************************
2
3  Intel 82599 Virtual Function driver
4  Copyright(c) 1999 - 2015 Intel Corporation.
5
6  This program is free software; you can redistribute it and/or modify it
7  under the terms and conditions of the GNU General Public License,
8  version 2, as published by the Free Software Foundation.
9
10  This program is distributed in the hope it will be useful, but WITHOUT
11  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
12  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
13  more details.
14
15  You should have received a copy of the GNU General Public License along with
16  this program; if not, see <http://www.gnu.org/licenses/>.
17
18  The full GNU General Public License is included in this distribution in
19  the file called "COPYING".
20
21  Contact Information:
22  e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
23  Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
24
25*******************************************************************************/
26
27#include "vf.h"
28#include "ixgbevf.h"
29
30/**
31 *  ixgbevf_start_hw_vf - Prepare hardware for Tx/Rx
32 *  @hw: pointer to hardware structure
33 *
34 *  Starts the hardware by filling the bus info structure and media type, clears
35 *  all on chip counters, initializes receive address registers, multicast
36 *  table, VLAN filter table, calls routine to set up link and flow control
37 *  settings, and leaves transmit and receive units disabled and uninitialized
38 **/
39static s32 ixgbevf_start_hw_vf(struct ixgbe_hw *hw)
40{
41	/* Clear adapter stopped flag */
42	hw->adapter_stopped = false;
43
44	return 0;
45}
46
47/**
48 *  ixgbevf_init_hw_vf - virtual function hardware initialization
49 *  @hw: pointer to hardware structure
50 *
51 *  Initialize the hardware by resetting the hardware and then starting
52 *  the hardware
53 **/
54static s32 ixgbevf_init_hw_vf(struct ixgbe_hw *hw)
55{
56	s32 status = hw->mac.ops.start_hw(hw);
57
58	hw->mac.ops.get_mac_addr(hw, hw->mac.addr);
59
60	return status;
61}
62
63/**
64 *  ixgbevf_reset_hw_vf - Performs hardware reset
65 *  @hw: pointer to hardware structure
66 *
67 *  Resets the hardware by resetting the transmit and receive units, masks and
68 *  clears all interrupts.
69 **/
70static s32 ixgbevf_reset_hw_vf(struct ixgbe_hw *hw)
71{
72	struct ixgbe_mbx_info *mbx = &hw->mbx;
73	u32 timeout = IXGBE_VF_INIT_TIMEOUT;
74	s32 ret_val = IXGBE_ERR_INVALID_MAC_ADDR;
75	u32 msgbuf[IXGBE_VF_PERMADDR_MSG_LEN];
76	u8 *addr = (u8 *)(&msgbuf[1]);
77
78	/* Call adapter stop to disable tx/rx and clear interrupts */
79	hw->mac.ops.stop_adapter(hw);
80
81	/* reset the api version */
82	hw->api_version = ixgbe_mbox_api_10;
83
84	IXGBE_WRITE_REG(hw, IXGBE_VFCTRL, IXGBE_CTRL_RST);
85	IXGBE_WRITE_FLUSH(hw);
86
87	/* we cannot reset while the RSTI / RSTD bits are asserted */
88	while (!mbx->ops.check_for_rst(hw) && timeout) {
89		timeout--;
90		udelay(5);
91	}
92
93	if (!timeout)
94		return IXGBE_ERR_RESET_FAILED;
95
96	/* mailbox timeout can now become active */
97	mbx->timeout = IXGBE_VF_MBX_INIT_TIMEOUT;
98
99	msgbuf[0] = IXGBE_VF_RESET;
100	mbx->ops.write_posted(hw, msgbuf, 1);
101
102	mdelay(10);
103
104	/* set our "perm_addr" based on info provided by PF
105	 * also set up the mc_filter_type which is piggy backed
106	 * on the mac address in word 3
107	 */
108	ret_val = mbx->ops.read_posted(hw, msgbuf, IXGBE_VF_PERMADDR_MSG_LEN);
109	if (ret_val)
110		return ret_val;
111
112	/* New versions of the PF may NACK the reset return message
113	 * to indicate that no MAC address has yet been assigned for
114	 * the VF.
115	 */
116	if (msgbuf[0] != (IXGBE_VF_RESET | IXGBE_VT_MSGTYPE_ACK) &&
117	    msgbuf[0] != (IXGBE_VF_RESET | IXGBE_VT_MSGTYPE_NACK))
118		return IXGBE_ERR_INVALID_MAC_ADDR;
119
120	ether_addr_copy(hw->mac.perm_addr, addr);
121	hw->mac.mc_filter_type = msgbuf[IXGBE_VF_MC_TYPE_WORD];
122
123	return 0;
124}
125
126/**
127 *  ixgbevf_stop_hw_vf - Generic stop Tx/Rx units
128 *  @hw: pointer to hardware structure
129 *
130 *  Sets the adapter_stopped flag within ixgbe_hw struct. Clears interrupts,
131 *  disables transmit and receive units. The adapter_stopped flag is used by
132 *  the shared code and drivers to determine if the adapter is in a stopped
133 *  state and should not touch the hardware.
134 **/
135static s32 ixgbevf_stop_hw_vf(struct ixgbe_hw *hw)
136{
137	u32 number_of_queues;
138	u32 reg_val;
139	u16 i;
140
141	/* Set the adapter_stopped flag so other driver functions stop touching
142	 * the hardware
143	 */
144	hw->adapter_stopped = true;
145
146	/* Disable the receive unit by stopped each queue */
147	number_of_queues = hw->mac.max_rx_queues;
148	for (i = 0; i < number_of_queues; i++) {
149		reg_val = IXGBE_READ_REG(hw, IXGBE_VFRXDCTL(i));
150		if (reg_val & IXGBE_RXDCTL_ENABLE) {
151			reg_val &= ~IXGBE_RXDCTL_ENABLE;
152			IXGBE_WRITE_REG(hw, IXGBE_VFRXDCTL(i), reg_val);
153		}
154	}
155
156	IXGBE_WRITE_FLUSH(hw);
157
158	/* Clear interrupt mask to stop from interrupts being generated */
159	IXGBE_WRITE_REG(hw, IXGBE_VTEIMC, IXGBE_VF_IRQ_CLEAR_MASK);
160
161	/* Clear any pending interrupts */
162	IXGBE_READ_REG(hw, IXGBE_VTEICR);
163
164	/* Disable the transmit unit.  Each queue must be disabled. */
165	number_of_queues = hw->mac.max_tx_queues;
166	for (i = 0; i < number_of_queues; i++) {
167		reg_val = IXGBE_READ_REG(hw, IXGBE_VFTXDCTL(i));
168		if (reg_val & IXGBE_TXDCTL_ENABLE) {
169			reg_val &= ~IXGBE_TXDCTL_ENABLE;
170			IXGBE_WRITE_REG(hw, IXGBE_VFTXDCTL(i), reg_val);
171		}
172	}
173
174	return 0;
175}
176
177/**
178 *  ixgbevf_mta_vector - Determines bit-vector in multicast table to set
179 *  @hw: pointer to hardware structure
180 *  @mc_addr: the multicast address
181 *
182 *  Extracts the 12 bits, from a multicast address, to determine which
183 *  bit-vector to set in the multicast table. The hardware uses 12 bits, from
184 *  incoming Rx multicast addresses, to determine the bit-vector to check in
185 *  the MTA. Which of the 4 combination, of 12-bits, the hardware uses is set
186 *  by the MO field of the MCSTCTRL. The MO field is set during initialization
187 *  to mc_filter_type.
188 **/
189static s32 ixgbevf_mta_vector(struct ixgbe_hw *hw, u8 *mc_addr)
190{
191	u32 vector = 0;
192
193	switch (hw->mac.mc_filter_type) {
194	case 0:   /* use bits [47:36] of the address */
195		vector = ((mc_addr[4] >> 4) | (((u16)mc_addr[5]) << 4));
196		break;
197	case 1:   /* use bits [46:35] of the address */
198		vector = ((mc_addr[4] >> 3) | (((u16)mc_addr[5]) << 5));
199		break;
200	case 2:   /* use bits [45:34] of the address */
201		vector = ((mc_addr[4] >> 2) | (((u16)mc_addr[5]) << 6));
202		break;
203	case 3:   /* use bits [43:32] of the address */
204		vector = ((mc_addr[4]) | (((u16)mc_addr[5]) << 8));
205		break;
206	default:  /* Invalid mc_filter_type */
207		break;
208	}
209
210	/* vector can only be 12-bits or boundary will be exceeded */
211	vector &= 0xFFF;
212	return vector;
213}
214
215/**
216 *  ixgbevf_get_mac_addr_vf - Read device MAC address
217 *  @hw: pointer to the HW structure
218 *  @mac_addr: pointer to storage for retrieved MAC address
219 **/
220static s32 ixgbevf_get_mac_addr_vf(struct ixgbe_hw *hw, u8 *mac_addr)
221{
222	ether_addr_copy(mac_addr, hw->mac.perm_addr);
223
224	return 0;
225}
226
227static s32 ixgbevf_set_uc_addr_vf(struct ixgbe_hw *hw, u32 index, u8 *addr)
228{
229	struct ixgbe_mbx_info *mbx = &hw->mbx;
230	u32 msgbuf[3];
231	u8 *msg_addr = (u8 *)(&msgbuf[1]);
232	s32 ret_val;
233
234	memset(msgbuf, 0, sizeof(msgbuf));
235	/* If index is one then this is the start of a new list and needs
236	 * indication to the PF so it can do it's own list management.
237	 * If it is zero then that tells the PF to just clear all of
238	 * this VF's macvlans and there is no new list.
239	 */
240	msgbuf[0] |= index << IXGBE_VT_MSGINFO_SHIFT;
241	msgbuf[0] |= IXGBE_VF_SET_MACVLAN;
242	if (addr)
243		ether_addr_copy(msg_addr, addr);
244	ret_val = mbx->ops.write_posted(hw, msgbuf, 3);
245
246	if (!ret_val)
247		ret_val = mbx->ops.read_posted(hw, msgbuf, 3);
248
249	msgbuf[0] &= ~IXGBE_VT_MSGTYPE_CTS;
250
251	if (!ret_val)
252		if (msgbuf[0] ==
253		    (IXGBE_VF_SET_MACVLAN | IXGBE_VT_MSGTYPE_NACK))
254			ret_val = -ENOMEM;
255
256	return ret_val;
257}
258
259/**
260 * ixgbevf_get_reta_locked - get the RSS redirection table (RETA) contents.
261 * @adapter: pointer to the port handle
262 * @reta: buffer to fill with RETA contents.
263 * @num_rx_queues: Number of Rx queues configured for this port
264 *
265 * The "reta" buffer should be big enough to contain 32 registers.
266 *
267 * Returns: 0 on success.
268 *          if API doesn't support this operation - (-EOPNOTSUPP).
269 */
270int ixgbevf_get_reta_locked(struct ixgbe_hw *hw, u32 *reta, int num_rx_queues)
271{
272	int err, i, j;
273	u32 msgbuf[IXGBE_VFMAILBOX_SIZE];
274	u32 *hw_reta = &msgbuf[1];
275	u32 mask = 0;
276
277	/* We have to use a mailbox for 82599 and x540 devices only.
278	 * For these devices RETA has 128 entries.
279	 * Also these VFs support up to 4 RSS queues. Therefore PF will compress
280	 * 16 RETA entries in each DWORD giving 2 bits to each entry.
281	 */
282	int dwords = IXGBEVF_82599_RETA_SIZE / 16;
283
284	/* We support the RSS querying for 82599 and x540 devices only.
285	 * Thus return an error if API doesn't support RETA querying or querying
286	 * is not supported for this device type.
287	 */
288	if (hw->api_version != ixgbe_mbox_api_12 ||
289	    hw->mac.type >= ixgbe_mac_X550_vf)
290		return -EOPNOTSUPP;
291
292	msgbuf[0] = IXGBE_VF_GET_RETA;
293
294	err = hw->mbx.ops.write_posted(hw, msgbuf, 1);
295
296	if (err)
297		return err;
298
299	err = hw->mbx.ops.read_posted(hw, msgbuf, dwords + 1);
300
301	if (err)
302		return err;
303
304	msgbuf[0] &= ~IXGBE_VT_MSGTYPE_CTS;
305
306	/* If the operation has been refused by a PF return -EPERM */
307	if (msgbuf[0] == (IXGBE_VF_GET_RETA | IXGBE_VT_MSGTYPE_NACK))
308		return -EPERM;
309
310	/* If we didn't get an ACK there must have been
311	 * some sort of mailbox error so we should treat it
312	 * as such.
313	 */
314	if (msgbuf[0] != (IXGBE_VF_GET_RETA | IXGBE_VT_MSGTYPE_ACK))
315		return IXGBE_ERR_MBX;
316
317	/* ixgbevf doesn't support more than 2 queues at the moment */
318	if (num_rx_queues > 1)
319		mask = 0x1;
320
321	for (i = 0; i < dwords; i++)
322		for (j = 0; j < 16; j++)
323			reta[i * 16 + j] = (hw_reta[i] >> (2 * j)) & mask;
324
325	return 0;
326}
327
328/**
329 * ixgbevf_get_rss_key_locked - get the RSS Random Key
330 * @hw: pointer to the HW structure
331 * @rss_key: buffer to fill with RSS Hash Key contents.
332 *
333 * The "rss_key" buffer should be big enough to contain 10 registers.
334 *
335 * Returns: 0 on success.
336 *          if API doesn't support this operation - (-EOPNOTSUPP).
337 */
338int ixgbevf_get_rss_key_locked(struct ixgbe_hw *hw, u8 *rss_key)
339{
340	int err;
341	u32 msgbuf[IXGBE_VFMAILBOX_SIZE];
342
343	/* We currently support the RSS Random Key retrieval for 82599 and x540
344	 * devices only.
345	 *
346	 * Thus return an error if API doesn't support RSS Random Key retrieval
347	 * or if the operation is not supported for this device type.
348	 */
349	if (hw->api_version != ixgbe_mbox_api_12 ||
350	    hw->mac.type >= ixgbe_mac_X550_vf)
351		return -EOPNOTSUPP;
352
353	msgbuf[0] = IXGBE_VF_GET_RSS_KEY;
354	err = hw->mbx.ops.write_posted(hw, msgbuf, 1);
355
356	if (err)
357		return err;
358
359	err = hw->mbx.ops.read_posted(hw, msgbuf, 11);
360
361	if (err)
362		return err;
363
364	msgbuf[0] &= ~IXGBE_VT_MSGTYPE_CTS;
365
366	/* If the operation has been refused by a PF return -EPERM */
367	if (msgbuf[0] == (IXGBE_VF_GET_RETA | IXGBE_VT_MSGTYPE_NACK))
368		return -EPERM;
369
370	/* If we didn't get an ACK there must have been
371	 * some sort of mailbox error so we should treat it
372	 * as such.
373	 */
374	if (msgbuf[0] != (IXGBE_VF_GET_RSS_KEY | IXGBE_VT_MSGTYPE_ACK))
375		return IXGBE_ERR_MBX;
376
377	memcpy(rss_key, msgbuf + 1, IXGBEVF_RSS_HASH_KEY_SIZE);
378
379	return 0;
380}
381
382/**
383 *  ixgbevf_set_rar_vf - set device MAC address
384 *  @hw: pointer to hardware structure
385 *  @index: Receive address register to write
386 *  @addr: Address to put into receive address register
387 *  @vmdq: Unused in this implementation
388 **/
389static s32 ixgbevf_set_rar_vf(struct ixgbe_hw *hw, u32 index, u8 *addr,
390			      u32 vmdq)
391{
392	struct ixgbe_mbx_info *mbx = &hw->mbx;
393	u32 msgbuf[3];
394	u8 *msg_addr = (u8 *)(&msgbuf[1]);
395	s32 ret_val;
396
397	memset(msgbuf, 0, sizeof(msgbuf));
398	msgbuf[0] = IXGBE_VF_SET_MAC_ADDR;
399	ether_addr_copy(msg_addr, addr);
400	ret_val = mbx->ops.write_posted(hw, msgbuf, 3);
401
402	if (!ret_val)
403		ret_val = mbx->ops.read_posted(hw, msgbuf, 3);
404
405	msgbuf[0] &= ~IXGBE_VT_MSGTYPE_CTS;
406
407	/* if nacked the address was rejected, use "perm_addr" */
408	if (!ret_val &&
409	    (msgbuf[0] == (IXGBE_VF_SET_MAC_ADDR | IXGBE_VT_MSGTYPE_NACK)))
410		ixgbevf_get_mac_addr_vf(hw, hw->mac.addr);
411
412	return ret_val;
413}
414
415static void ixgbevf_write_msg_read_ack(struct ixgbe_hw *hw,
416				       u32 *msg, u16 size)
417{
418	struct ixgbe_mbx_info *mbx = &hw->mbx;
419	u32 retmsg[IXGBE_VFMAILBOX_SIZE];
420	s32 retval = mbx->ops.write_posted(hw, msg, size);
421
422	if (!retval)
423		mbx->ops.read_posted(hw, retmsg, size);
424}
425
426/**
427 *  ixgbevf_update_mc_addr_list_vf - Update Multicast addresses
428 *  @hw: pointer to the HW structure
429 *  @netdev: pointer to net device structure
430 *
431 *  Updates the Multicast Table Array.
432 **/
433static s32 ixgbevf_update_mc_addr_list_vf(struct ixgbe_hw *hw,
434					  struct net_device *netdev)
435{
436	struct netdev_hw_addr *ha;
437	u32 msgbuf[IXGBE_VFMAILBOX_SIZE];
438	u16 *vector_list = (u16 *)&msgbuf[1];
439	u32 cnt, i;
440
441	/* Each entry in the list uses 1 16 bit word.  We have 30
442	 * 16 bit words available in our HW msg buffer (minus 1 for the
443	 * msg type).  That's 30 hash values if we pack 'em right.  If
444	 * there are more than 30 MC addresses to add then punt the
445	 * extras for now and then add code to handle more than 30 later.
446	 * It would be unusual for a server to request that many multi-cast
447	 * addresses except for in large enterprise network environments.
448	 */
449
450	cnt = netdev_mc_count(netdev);
451	if (cnt > 30)
452		cnt = 30;
453	msgbuf[0] = IXGBE_VF_SET_MULTICAST;
454	msgbuf[0] |= cnt << IXGBE_VT_MSGINFO_SHIFT;
455
456	i = 0;
457	netdev_for_each_mc_addr(ha, netdev) {
458		if (i == cnt)
459			break;
460		if (is_link_local_ether_addr(ha->addr))
461			continue;
462
463		vector_list[i++] = ixgbevf_mta_vector(hw, ha->addr);
464	}
465
466	ixgbevf_write_msg_read_ack(hw, msgbuf, IXGBE_VFMAILBOX_SIZE);
467
468	return 0;
469}
470
471/**
472 *  ixgbevf_set_vfta_vf - Set/Unset VLAN filter table address
473 *  @hw: pointer to the HW structure
474 *  @vlan: 12 bit VLAN ID
475 *  @vind: unused by VF drivers
476 *  @vlan_on: if true then set bit, else clear bit
477 **/
478static s32 ixgbevf_set_vfta_vf(struct ixgbe_hw *hw, u32 vlan, u32 vind,
479			       bool vlan_on)
480{
481	struct ixgbe_mbx_info *mbx = &hw->mbx;
482	u32 msgbuf[2];
483	s32 err;
484
485	msgbuf[0] = IXGBE_VF_SET_VLAN;
486	msgbuf[1] = vlan;
487	/* Setting the 8 bit field MSG INFO to TRUE indicates "add" */
488	msgbuf[0] |= vlan_on << IXGBE_VT_MSGINFO_SHIFT;
489
490	err = mbx->ops.write_posted(hw, msgbuf, 2);
491	if (err)
492		goto mbx_err;
493
494	err = mbx->ops.read_posted(hw, msgbuf, 2);
495	if (err)
496		goto mbx_err;
497
498	/* remove extra bits from the message */
499	msgbuf[0] &= ~IXGBE_VT_MSGTYPE_CTS;
500	msgbuf[0] &= ~(0xFF << IXGBE_VT_MSGINFO_SHIFT);
501
502	if (msgbuf[0] != (IXGBE_VF_SET_VLAN | IXGBE_VT_MSGTYPE_ACK))
503		err = IXGBE_ERR_INVALID_ARGUMENT;
504
505mbx_err:
506	return err;
507}
508
509/**
510 *  ixgbevf_setup_mac_link_vf - Setup MAC link settings
511 *  @hw: pointer to hardware structure
512 *  @speed: Unused in this implementation
513 *  @autoneg: Unused in this implementation
514 *  @autoneg_wait_to_complete: Unused in this implementation
515 *
516 *  Do nothing and return success.  VF drivers are not allowed to change
517 *  global settings.  Maintained for driver compatibility.
518 **/
519static s32 ixgbevf_setup_mac_link_vf(struct ixgbe_hw *hw,
520				     ixgbe_link_speed speed, bool autoneg,
521				     bool autoneg_wait_to_complete)
522{
523	return 0;
524}
525
526/**
527 *  ixgbevf_check_mac_link_vf - Get link/speed status
528 *  @hw: pointer to hardware structure
529 *  @speed: pointer to link speed
530 *  @link_up: true is link is up, false otherwise
531 *  @autoneg_wait_to_complete: true when waiting for completion is needed
532 *
533 *  Reads the links register to determine if link is up and the current speed
534 **/
535static s32 ixgbevf_check_mac_link_vf(struct ixgbe_hw *hw,
536				     ixgbe_link_speed *speed,
537				     bool *link_up,
538				     bool autoneg_wait_to_complete)
539{
540	struct ixgbe_mbx_info *mbx = &hw->mbx;
541	struct ixgbe_mac_info *mac = &hw->mac;
542	s32 ret_val = 0;
543	u32 links_reg;
544	u32 in_msg = 0;
545
546	/* If we were hit with a reset drop the link */
547	if (!mbx->ops.check_for_rst(hw) || !mbx->timeout)
548		mac->get_link_status = true;
549
550	if (!mac->get_link_status)
551		goto out;
552
553	/* if link status is down no point in checking to see if pf is up */
554	links_reg = IXGBE_READ_REG(hw, IXGBE_VFLINKS);
555	if (!(links_reg & IXGBE_LINKS_UP))
556		goto out;
557
558	/* for SFP+ modules and DA cables on 82599 it can take up to 500usecs
559	 * before the link status is correct
560	 */
561	if (mac->type == ixgbe_mac_82599_vf) {
562		int i;
563
564		for (i = 0; i < 5; i++) {
565			udelay(100);
566			links_reg = IXGBE_READ_REG(hw, IXGBE_VFLINKS);
567
568			if (!(links_reg & IXGBE_LINKS_UP))
569				goto out;
570		}
571	}
572
573	switch (links_reg & IXGBE_LINKS_SPEED_82599) {
574	case IXGBE_LINKS_SPEED_10G_82599:
575		*speed = IXGBE_LINK_SPEED_10GB_FULL;
576		break;
577	case IXGBE_LINKS_SPEED_1G_82599:
578		*speed = IXGBE_LINK_SPEED_1GB_FULL;
579		break;
580	case IXGBE_LINKS_SPEED_100_82599:
581		*speed = IXGBE_LINK_SPEED_100_FULL;
582		break;
583	}
584
585	/* if the read failed it could just be a mailbox collision, best wait
586	 * until we are called again and don't report an error
587	 */
588	if (mbx->ops.read(hw, &in_msg, 1))
589		goto out;
590
591	if (!(in_msg & IXGBE_VT_MSGTYPE_CTS)) {
592		/* msg is not CTS and is NACK we must have lost CTS status */
593		if (in_msg & IXGBE_VT_MSGTYPE_NACK)
594			ret_val = -1;
595		goto out;
596	}
597
598	/* the pf is talking, if we timed out in the past we reinit */
599	if (!mbx->timeout) {
600		ret_val = -1;
601		goto out;
602	}
603
604	/* if we passed all the tests above then the link is up and we no
605	 * longer need to check for link
606	 */
607	mac->get_link_status = false;
608
609out:
610	*link_up = !mac->get_link_status;
611	return ret_val;
612}
613
614/**
615 *  ixgbevf_rlpml_set_vf - Set the maximum receive packet length
616 *  @hw: pointer to the HW structure
617 *  @max_size: value to assign to max frame size
618 **/
619void ixgbevf_rlpml_set_vf(struct ixgbe_hw *hw, u16 max_size)
620{
621	u32 msgbuf[2];
622
623	msgbuf[0] = IXGBE_VF_SET_LPE;
624	msgbuf[1] = max_size;
625	ixgbevf_write_msg_read_ack(hw, msgbuf, 2);
626}
627
628/**
629 *  ixgbevf_negotiate_api_version - Negotiate supported API version
630 *  @hw: pointer to the HW structure
631 *  @api: integer containing requested API version
632 **/
633int ixgbevf_negotiate_api_version(struct ixgbe_hw *hw, int api)
634{
635	int err;
636	u32 msg[3];
637
638	/* Negotiate the mailbox API version */
639	msg[0] = IXGBE_VF_API_NEGOTIATE;
640	msg[1] = api;
641	msg[2] = 0;
642	err = hw->mbx.ops.write_posted(hw, msg, 3);
643
644	if (!err)
645		err = hw->mbx.ops.read_posted(hw, msg, 3);
646
647	if (!err) {
648		msg[0] &= ~IXGBE_VT_MSGTYPE_CTS;
649
650		/* Store value and return 0 on success */
651		if (msg[0] == (IXGBE_VF_API_NEGOTIATE | IXGBE_VT_MSGTYPE_ACK)) {
652			hw->api_version = api;
653			return 0;
654		}
655
656		err = IXGBE_ERR_INVALID_ARGUMENT;
657	}
658
659	return err;
660}
661
662int ixgbevf_get_queues(struct ixgbe_hw *hw, unsigned int *num_tcs,
663		       unsigned int *default_tc)
664{
665	int err;
666	u32 msg[5];
667
668	/* do nothing if API doesn't support ixgbevf_get_queues */
669	switch (hw->api_version) {
670	case ixgbe_mbox_api_11:
671	case ixgbe_mbox_api_12:
672		break;
673	default:
674		return 0;
675	}
676
677	/* Fetch queue configuration from the PF */
678	msg[0] = IXGBE_VF_GET_QUEUE;
679	msg[1] = msg[2] = msg[3] = msg[4] = 0;
680	err = hw->mbx.ops.write_posted(hw, msg, 5);
681
682	if (!err)
683		err = hw->mbx.ops.read_posted(hw, msg, 5);
684
685	if (!err) {
686		msg[0] &= ~IXGBE_VT_MSGTYPE_CTS;
687
688		/* if we we didn't get an ACK there must have been
689		 * some sort of mailbox error so we should treat it
690		 * as such
691		 */
692		if (msg[0] != (IXGBE_VF_GET_QUEUE | IXGBE_VT_MSGTYPE_ACK))
693			return IXGBE_ERR_MBX;
694
695		/* record and validate values from message */
696		hw->mac.max_tx_queues = msg[IXGBE_VF_TX_QUEUES];
697		if (hw->mac.max_tx_queues == 0 ||
698		    hw->mac.max_tx_queues > IXGBE_VF_MAX_TX_QUEUES)
699			hw->mac.max_tx_queues = IXGBE_VF_MAX_TX_QUEUES;
700
701		hw->mac.max_rx_queues = msg[IXGBE_VF_RX_QUEUES];
702		if (hw->mac.max_rx_queues == 0 ||
703		    hw->mac.max_rx_queues > IXGBE_VF_MAX_RX_QUEUES)
704			hw->mac.max_rx_queues = IXGBE_VF_MAX_RX_QUEUES;
705
706		*num_tcs = msg[IXGBE_VF_TRANS_VLAN];
707		/* in case of unknown state assume we cannot tag frames */
708		if (*num_tcs > hw->mac.max_rx_queues)
709			*num_tcs = 1;
710
711		*default_tc = msg[IXGBE_VF_DEF_QUEUE];
712		/* default to queue 0 on out-of-bounds queue number */
713		if (*default_tc >= hw->mac.max_tx_queues)
714			*default_tc = 0;
715	}
716
717	return err;
718}
719
720static const struct ixgbe_mac_operations ixgbevf_mac_ops = {
721	.init_hw		= ixgbevf_init_hw_vf,
722	.reset_hw		= ixgbevf_reset_hw_vf,
723	.start_hw		= ixgbevf_start_hw_vf,
724	.get_mac_addr		= ixgbevf_get_mac_addr_vf,
725	.stop_adapter		= ixgbevf_stop_hw_vf,
726	.setup_link		= ixgbevf_setup_mac_link_vf,
727	.check_link		= ixgbevf_check_mac_link_vf,
728	.set_rar		= ixgbevf_set_rar_vf,
729	.update_mc_addr_list	= ixgbevf_update_mc_addr_list_vf,
730	.set_uc_addr		= ixgbevf_set_uc_addr_vf,
731	.set_vfta		= ixgbevf_set_vfta_vf,
732};
733
734const struct ixgbevf_info ixgbevf_82599_vf_info = {
735	.mac = ixgbe_mac_82599_vf,
736	.mac_ops = &ixgbevf_mac_ops,
737};
738
739const struct ixgbevf_info ixgbevf_X540_vf_info = {
740	.mac = ixgbe_mac_X540_vf,
741	.mac_ops = &ixgbevf_mac_ops,
742};
743
744const struct ixgbevf_info ixgbevf_X550_vf_info = {
745	.mac = ixgbe_mac_X550_vf,
746	.mac_ops = &ixgbevf_mac_ops,
747};
748
749const struct ixgbevf_info ixgbevf_X550EM_x_vf_info = {
750	.mac = ixgbe_mac_X550EM_x_vf,
751	.mac_ops = &ixgbevf_mac_ops,
752};
753