1/*
2 * Copyright 2002-2005, Instant802 Networks, Inc.
3 * Copyright 2005-2006, Devicescape Software, Inc.
4 * Copyright 2006-2007	Jiri Benc <jbenc@suse.cz>
5 * Copyright 2013-2014  Intel Mobile Communications GmbH
6 *
7 * This program is free software; you can redistribute it and/or modify
8 * it under the terms of the GNU General Public License version 2 as
9 * published by the Free Software Foundation.
10 */
11
12#include <net/mac80211.h>
13#include <linux/module.h>
14#include <linux/init.h>
15#include <linux/netdevice.h>
16#include <linux/types.h>
17#include <linux/slab.h>
18#include <linux/skbuff.h>
19#include <linux/etherdevice.h>
20#include <linux/if_arp.h>
21#include <linux/rtnetlink.h>
22#include <linux/bitmap.h>
23#include <linux/pm_qos.h>
24#include <linux/inetdevice.h>
25#include <net/net_namespace.h>
26#include <net/cfg80211.h>
27#include <net/addrconf.h>
28
29#include "ieee80211_i.h"
30#include "driver-ops.h"
31#include "rate.h"
32#include "mesh.h"
33#include "wep.h"
34#include "led.h"
35#include "cfg.h"
36#include "debugfs.h"
37
38void ieee80211_configure_filter(struct ieee80211_local *local)
39{
40	u64 mc;
41	unsigned int changed_flags;
42	unsigned int new_flags = 0;
43
44	if (atomic_read(&local->iff_promiscs))
45		new_flags |= FIF_PROMISC_IN_BSS;
46
47	if (atomic_read(&local->iff_allmultis))
48		new_flags |= FIF_ALLMULTI;
49
50	if (local->monitors || test_bit(SCAN_SW_SCANNING, &local->scanning) ||
51	    test_bit(SCAN_ONCHANNEL_SCANNING, &local->scanning))
52		new_flags |= FIF_BCN_PRBRESP_PROMISC;
53
54	if (local->fif_probe_req || local->probe_req_reg)
55		new_flags |= FIF_PROBE_REQ;
56
57	if (local->fif_fcsfail)
58		new_flags |= FIF_FCSFAIL;
59
60	if (local->fif_plcpfail)
61		new_flags |= FIF_PLCPFAIL;
62
63	if (local->fif_control)
64		new_flags |= FIF_CONTROL;
65
66	if (local->fif_other_bss)
67		new_flags |= FIF_OTHER_BSS;
68
69	if (local->fif_pspoll)
70		new_flags |= FIF_PSPOLL;
71
72	spin_lock_bh(&local->filter_lock);
73	changed_flags = local->filter_flags ^ new_flags;
74
75	mc = drv_prepare_multicast(local, &local->mc_list);
76	spin_unlock_bh(&local->filter_lock);
77
78	/* be a bit nasty */
79	new_flags |= (1<<31);
80
81	drv_configure_filter(local, changed_flags, &new_flags, mc);
82
83	WARN_ON(new_flags & (1<<31));
84
85	local->filter_flags = new_flags & ~(1<<31);
86}
87
88static void ieee80211_reconfig_filter(struct work_struct *work)
89{
90	struct ieee80211_local *local =
91		container_of(work, struct ieee80211_local, reconfig_filter);
92
93	ieee80211_configure_filter(local);
94}
95
96static u32 ieee80211_hw_conf_chan(struct ieee80211_local *local)
97{
98	struct ieee80211_sub_if_data *sdata;
99	struct cfg80211_chan_def chandef = {};
100	u32 changed = 0;
101	int power;
102	u32 offchannel_flag;
103
104	offchannel_flag = local->hw.conf.flags & IEEE80211_CONF_OFFCHANNEL;
105
106	if (local->scan_chandef.chan) {
107		chandef = local->scan_chandef;
108	} else if (local->tmp_channel) {
109		chandef.chan = local->tmp_channel;
110		chandef.width = NL80211_CHAN_WIDTH_20_NOHT;
111		chandef.center_freq1 = chandef.chan->center_freq;
112	} else
113		chandef = local->_oper_chandef;
114
115	WARN(!cfg80211_chandef_valid(&chandef),
116	     "control:%d MHz width:%d center: %d/%d MHz",
117	     chandef.chan->center_freq, chandef.width,
118	     chandef.center_freq1, chandef.center_freq2);
119
120	if (!cfg80211_chandef_identical(&chandef, &local->_oper_chandef))
121		local->hw.conf.flags |= IEEE80211_CONF_OFFCHANNEL;
122	else
123		local->hw.conf.flags &= ~IEEE80211_CONF_OFFCHANNEL;
124
125	offchannel_flag ^= local->hw.conf.flags & IEEE80211_CONF_OFFCHANNEL;
126
127	if (offchannel_flag ||
128	    !cfg80211_chandef_identical(&local->hw.conf.chandef,
129					&local->_oper_chandef)) {
130		local->hw.conf.chandef = chandef;
131		changed |= IEEE80211_CONF_CHANGE_CHANNEL;
132	}
133
134	if (!conf_is_ht(&local->hw.conf)) {
135		/*
136		 * mac80211.h documents that this is only valid
137		 * when the channel is set to an HT type, and
138		 * that otherwise STATIC is used.
139		 */
140		local->hw.conf.smps_mode = IEEE80211_SMPS_STATIC;
141	} else if (local->hw.conf.smps_mode != local->smps_mode) {
142		local->hw.conf.smps_mode = local->smps_mode;
143		changed |= IEEE80211_CONF_CHANGE_SMPS;
144	}
145
146	power = ieee80211_chandef_max_power(&chandef);
147
148	rcu_read_lock();
149	list_for_each_entry_rcu(sdata, &local->interfaces, list) {
150		if (!rcu_access_pointer(sdata->vif.chanctx_conf))
151			continue;
152		if (sdata->vif.type == NL80211_IFTYPE_AP_VLAN)
153			continue;
154		power = min(power, sdata->vif.bss_conf.txpower);
155	}
156	rcu_read_unlock();
157
158	if (local->hw.conf.power_level != power) {
159		changed |= IEEE80211_CONF_CHANGE_POWER;
160		local->hw.conf.power_level = power;
161	}
162
163	return changed;
164}
165
166int ieee80211_hw_config(struct ieee80211_local *local, u32 changed)
167{
168	int ret = 0;
169
170	might_sleep();
171
172	if (!local->use_chanctx)
173		changed |= ieee80211_hw_conf_chan(local);
174	else
175		changed &= ~(IEEE80211_CONF_CHANGE_CHANNEL |
176			     IEEE80211_CONF_CHANGE_POWER);
177
178	if (changed && local->open_count) {
179		ret = drv_config(local, changed);
180		/*
181		 * Goal:
182		 * HW reconfiguration should never fail, the driver has told
183		 * us what it can support so it should live up to that promise.
184		 *
185		 * Current status:
186		 * rfkill is not integrated with mac80211 and a
187		 * configuration command can thus fail if hardware rfkill
188		 * is enabled
189		 *
190		 * FIXME: integrate rfkill with mac80211 and then add this
191		 * WARN_ON() back
192		 *
193		 */
194		/* WARN_ON(ret); */
195	}
196
197	return ret;
198}
199
200void ieee80211_bss_info_change_notify(struct ieee80211_sub_if_data *sdata,
201				      u32 changed)
202{
203	struct ieee80211_local *local = sdata->local;
204
205	if (!changed || sdata->vif.type == NL80211_IFTYPE_AP_VLAN)
206		return;
207
208	drv_bss_info_changed(local, sdata, &sdata->vif.bss_conf, changed);
209}
210
211u32 ieee80211_reset_erp_info(struct ieee80211_sub_if_data *sdata)
212{
213	sdata->vif.bss_conf.use_cts_prot = false;
214	sdata->vif.bss_conf.use_short_preamble = false;
215	sdata->vif.bss_conf.use_short_slot = false;
216	return BSS_CHANGED_ERP_CTS_PROT |
217	       BSS_CHANGED_ERP_PREAMBLE |
218	       BSS_CHANGED_ERP_SLOT;
219}
220
221static void ieee80211_tasklet_handler(unsigned long data)
222{
223	struct ieee80211_local *local = (struct ieee80211_local *) data;
224	struct sk_buff *skb;
225
226	while ((skb = skb_dequeue(&local->skb_queue)) ||
227	       (skb = skb_dequeue(&local->skb_queue_unreliable))) {
228		switch (skb->pkt_type) {
229		case IEEE80211_RX_MSG:
230			/* Clear skb->pkt_type in order to not confuse kernel
231			 * netstack. */
232			skb->pkt_type = 0;
233			ieee80211_rx(&local->hw, skb);
234			break;
235		case IEEE80211_TX_STATUS_MSG:
236			skb->pkt_type = 0;
237			ieee80211_tx_status(&local->hw, skb);
238			break;
239		default:
240			WARN(1, "mac80211: Packet is of unknown type %d\n",
241			     skb->pkt_type);
242			dev_kfree_skb(skb);
243			break;
244		}
245	}
246}
247
248static void ieee80211_restart_work(struct work_struct *work)
249{
250	struct ieee80211_local *local =
251		container_of(work, struct ieee80211_local, restart_work);
252	struct ieee80211_sub_if_data *sdata;
253
254	/* wait for scan work complete */
255	flush_workqueue(local->workqueue);
256
257	WARN(test_bit(SCAN_HW_SCANNING, &local->scanning),
258	     "%s called with hardware scan in progress\n", __func__);
259
260	rtnl_lock();
261	list_for_each_entry(sdata, &local->interfaces, list)
262		flush_delayed_work(&sdata->dec_tailroom_needed_wk);
263	ieee80211_scan_cancel(local);
264	ieee80211_reconfig(local);
265	rtnl_unlock();
266}
267
268void ieee80211_restart_hw(struct ieee80211_hw *hw)
269{
270	struct ieee80211_local *local = hw_to_local(hw);
271
272	trace_api_restart_hw(local);
273
274	wiphy_info(hw->wiphy,
275		   "Hardware restart was requested\n");
276
277	/* use this reason, ieee80211_reconfig will unblock it */
278	ieee80211_stop_queues_by_reason(hw, IEEE80211_MAX_QUEUE_MAP,
279					IEEE80211_QUEUE_STOP_REASON_SUSPEND,
280					false);
281
282	/*
283	 * Stop all Rx during the reconfig. We don't want state changes
284	 * or driver callbacks while this is in progress.
285	 */
286	local->in_reconfig = true;
287	barrier();
288
289	schedule_work(&local->restart_work);
290}
291EXPORT_SYMBOL(ieee80211_restart_hw);
292
293#ifdef CONFIG_INET
294static int ieee80211_ifa_changed(struct notifier_block *nb,
295				 unsigned long data, void *arg)
296{
297	struct in_ifaddr *ifa = arg;
298	struct ieee80211_local *local =
299		container_of(nb, struct ieee80211_local,
300			     ifa_notifier);
301	struct net_device *ndev = ifa->ifa_dev->dev;
302	struct wireless_dev *wdev = ndev->ieee80211_ptr;
303	struct in_device *idev;
304	struct ieee80211_sub_if_data *sdata;
305	struct ieee80211_bss_conf *bss_conf;
306	struct ieee80211_if_managed *ifmgd;
307	int c = 0;
308
309	/* Make sure it's our interface that got changed */
310	if (!wdev)
311		return NOTIFY_DONE;
312
313	if (wdev->wiphy != local->hw.wiphy)
314		return NOTIFY_DONE;
315
316	sdata = IEEE80211_DEV_TO_SUB_IF(ndev);
317	bss_conf = &sdata->vif.bss_conf;
318
319	/* ARP filtering is only supported in managed mode */
320	if (sdata->vif.type != NL80211_IFTYPE_STATION)
321		return NOTIFY_DONE;
322
323	idev = __in_dev_get_rtnl(sdata->dev);
324	if (!idev)
325		return NOTIFY_DONE;
326
327	ifmgd = &sdata->u.mgd;
328	sdata_lock(sdata);
329
330	/* Copy the addresses to the bss_conf list */
331	ifa = idev->ifa_list;
332	while (ifa) {
333		if (c < IEEE80211_BSS_ARP_ADDR_LIST_LEN)
334			bss_conf->arp_addr_list[c] = ifa->ifa_address;
335		ifa = ifa->ifa_next;
336		c++;
337	}
338
339	bss_conf->arp_addr_cnt = c;
340
341	/* Configure driver only if associated (which also implies it is up) */
342	if (ifmgd->associated)
343		ieee80211_bss_info_change_notify(sdata,
344						 BSS_CHANGED_ARP_FILTER);
345
346	sdata_unlock(sdata);
347
348	return NOTIFY_OK;
349}
350#endif
351
352#if IS_ENABLED(CONFIG_IPV6)
353static int ieee80211_ifa6_changed(struct notifier_block *nb,
354				  unsigned long data, void *arg)
355{
356	struct inet6_ifaddr *ifa = (struct inet6_ifaddr *)arg;
357	struct inet6_dev *idev = ifa->idev;
358	struct net_device *ndev = ifa->idev->dev;
359	struct ieee80211_local *local =
360		container_of(nb, struct ieee80211_local, ifa6_notifier);
361	struct wireless_dev *wdev = ndev->ieee80211_ptr;
362	struct ieee80211_sub_if_data *sdata;
363
364	/* Make sure it's our interface that got changed */
365	if (!wdev || wdev->wiphy != local->hw.wiphy)
366		return NOTIFY_DONE;
367
368	sdata = IEEE80211_DEV_TO_SUB_IF(ndev);
369
370	/*
371	 * For now only support station mode. This is mostly because
372	 * doing AP would have to handle AP_VLAN in some way ...
373	 */
374	if (sdata->vif.type != NL80211_IFTYPE_STATION)
375		return NOTIFY_DONE;
376
377	drv_ipv6_addr_change(local, sdata, idev);
378
379	return NOTIFY_OK;
380}
381#endif
382
383/* There isn't a lot of sense in it, but you can transmit anything you like */
384static const struct ieee80211_txrx_stypes
385ieee80211_default_mgmt_stypes[NUM_NL80211_IFTYPES] = {
386	[NL80211_IFTYPE_ADHOC] = {
387		.tx = 0xffff,
388		.rx = BIT(IEEE80211_STYPE_ACTION >> 4) |
389			BIT(IEEE80211_STYPE_AUTH >> 4) |
390			BIT(IEEE80211_STYPE_DEAUTH >> 4) |
391			BIT(IEEE80211_STYPE_PROBE_REQ >> 4),
392	},
393	[NL80211_IFTYPE_STATION] = {
394		.tx = 0xffff,
395		.rx = BIT(IEEE80211_STYPE_ACTION >> 4) |
396			BIT(IEEE80211_STYPE_PROBE_REQ >> 4),
397	},
398	[NL80211_IFTYPE_AP] = {
399		.tx = 0xffff,
400		.rx = BIT(IEEE80211_STYPE_ASSOC_REQ >> 4) |
401			BIT(IEEE80211_STYPE_REASSOC_REQ >> 4) |
402			BIT(IEEE80211_STYPE_PROBE_REQ >> 4) |
403			BIT(IEEE80211_STYPE_DISASSOC >> 4) |
404			BIT(IEEE80211_STYPE_AUTH >> 4) |
405			BIT(IEEE80211_STYPE_DEAUTH >> 4) |
406			BIT(IEEE80211_STYPE_ACTION >> 4),
407	},
408	[NL80211_IFTYPE_AP_VLAN] = {
409		/* copy AP */
410		.tx = 0xffff,
411		.rx = BIT(IEEE80211_STYPE_ASSOC_REQ >> 4) |
412			BIT(IEEE80211_STYPE_REASSOC_REQ >> 4) |
413			BIT(IEEE80211_STYPE_PROBE_REQ >> 4) |
414			BIT(IEEE80211_STYPE_DISASSOC >> 4) |
415			BIT(IEEE80211_STYPE_AUTH >> 4) |
416			BIT(IEEE80211_STYPE_DEAUTH >> 4) |
417			BIT(IEEE80211_STYPE_ACTION >> 4),
418	},
419	[NL80211_IFTYPE_P2P_CLIENT] = {
420		.tx = 0xffff,
421		.rx = BIT(IEEE80211_STYPE_ACTION >> 4) |
422			BIT(IEEE80211_STYPE_PROBE_REQ >> 4),
423	},
424	[NL80211_IFTYPE_P2P_GO] = {
425		.tx = 0xffff,
426		.rx = BIT(IEEE80211_STYPE_ASSOC_REQ >> 4) |
427			BIT(IEEE80211_STYPE_REASSOC_REQ >> 4) |
428			BIT(IEEE80211_STYPE_PROBE_REQ >> 4) |
429			BIT(IEEE80211_STYPE_DISASSOC >> 4) |
430			BIT(IEEE80211_STYPE_AUTH >> 4) |
431			BIT(IEEE80211_STYPE_DEAUTH >> 4) |
432			BIT(IEEE80211_STYPE_ACTION >> 4),
433	},
434	[NL80211_IFTYPE_MESH_POINT] = {
435		.tx = 0xffff,
436		.rx = BIT(IEEE80211_STYPE_ACTION >> 4) |
437			BIT(IEEE80211_STYPE_AUTH >> 4) |
438			BIT(IEEE80211_STYPE_DEAUTH >> 4),
439	},
440	[NL80211_IFTYPE_P2P_DEVICE] = {
441		.tx = 0xffff,
442		.rx = BIT(IEEE80211_STYPE_ACTION >> 4) |
443			BIT(IEEE80211_STYPE_PROBE_REQ >> 4),
444	},
445};
446
447static const struct ieee80211_ht_cap mac80211_ht_capa_mod_mask = {
448	.ampdu_params_info = IEEE80211_HT_AMPDU_PARM_FACTOR |
449			     IEEE80211_HT_AMPDU_PARM_DENSITY,
450
451	.cap_info = cpu_to_le16(IEEE80211_HT_CAP_SUP_WIDTH_20_40 |
452				IEEE80211_HT_CAP_MAX_AMSDU |
453				IEEE80211_HT_CAP_SGI_20 |
454				IEEE80211_HT_CAP_SGI_40 |
455				IEEE80211_HT_CAP_LDPC_CODING |
456				IEEE80211_HT_CAP_40MHZ_INTOLERANT),
457	.mcs = {
458		.rx_mask = { 0xff, 0xff, 0xff, 0xff, 0xff,
459			     0xff, 0xff, 0xff, 0xff, 0xff, },
460	},
461};
462
463static const struct ieee80211_vht_cap mac80211_vht_capa_mod_mask = {
464	.vht_cap_info =
465		cpu_to_le32(IEEE80211_VHT_CAP_RXLDPC |
466			    IEEE80211_VHT_CAP_SHORT_GI_80 |
467			    IEEE80211_VHT_CAP_SHORT_GI_160 |
468			    IEEE80211_VHT_CAP_RXSTBC_1 |
469			    IEEE80211_VHT_CAP_RXSTBC_2 |
470			    IEEE80211_VHT_CAP_RXSTBC_3 |
471			    IEEE80211_VHT_CAP_RXSTBC_4 |
472			    IEEE80211_VHT_CAP_TXSTBC |
473			    IEEE80211_VHT_CAP_SU_BEAMFORMER_CAPABLE |
474			    IEEE80211_VHT_CAP_SU_BEAMFORMEE_CAPABLE |
475			    IEEE80211_VHT_CAP_TX_ANTENNA_PATTERN |
476			    IEEE80211_VHT_CAP_RX_ANTENNA_PATTERN |
477			    IEEE80211_VHT_CAP_MAX_A_MPDU_LENGTH_EXPONENT_MASK),
478	.supp_mcs = {
479		.rx_mcs_map = cpu_to_le16(~0),
480		.tx_mcs_map = cpu_to_le16(~0),
481	},
482};
483
484struct ieee80211_hw *ieee80211_alloc_hw_nm(size_t priv_data_len,
485					   const struct ieee80211_ops *ops,
486					   const char *requested_name)
487{
488	struct ieee80211_local *local;
489	int priv_size, i;
490	struct wiphy *wiphy;
491	bool use_chanctx;
492
493	if (WARN_ON(!ops->tx || !ops->start || !ops->stop || !ops->config ||
494		    !ops->add_interface || !ops->remove_interface ||
495		    !ops->configure_filter))
496		return NULL;
497
498	if (WARN_ON(ops->sta_state && (ops->sta_add || ops->sta_remove)))
499		return NULL;
500
501	/* check all or no channel context operations exist */
502	i = !!ops->add_chanctx + !!ops->remove_chanctx +
503	    !!ops->change_chanctx + !!ops->assign_vif_chanctx +
504	    !!ops->unassign_vif_chanctx;
505	if (WARN_ON(i != 0 && i != 5))
506		return NULL;
507	use_chanctx = i == 5;
508
509	/* Ensure 32-byte alignment of our private data and hw private data.
510	 * We use the wiphy priv data for both our ieee80211_local and for
511	 * the driver's private data
512	 *
513	 * In memory it'll be like this:
514	 *
515	 * +-------------------------+
516	 * | struct wiphy	    |
517	 * +-------------------------+
518	 * | struct ieee80211_local  |
519	 * +-------------------------+
520	 * | driver's private data   |
521	 * +-------------------------+
522	 *
523	 */
524	priv_size = ALIGN(sizeof(*local), NETDEV_ALIGN) + priv_data_len;
525
526	wiphy = wiphy_new_nm(&mac80211_config_ops, priv_size, requested_name);
527
528	if (!wiphy)
529		return NULL;
530
531	wiphy->mgmt_stypes = ieee80211_default_mgmt_stypes;
532
533	wiphy->privid = mac80211_wiphy_privid;
534
535	wiphy->flags |= WIPHY_FLAG_NETNS_OK |
536			WIPHY_FLAG_4ADDR_AP |
537			WIPHY_FLAG_4ADDR_STATION |
538			WIPHY_FLAG_REPORTS_OBSS |
539			WIPHY_FLAG_OFFCHAN_TX;
540
541	if (ops->remain_on_channel)
542		wiphy->flags |= WIPHY_FLAG_HAS_REMAIN_ON_CHANNEL;
543
544	wiphy->features |= NL80211_FEATURE_SK_TX_STATUS |
545			   NL80211_FEATURE_SAE |
546			   NL80211_FEATURE_HT_IBSS |
547			   NL80211_FEATURE_VIF_TXPOWER |
548			   NL80211_FEATURE_MAC_ON_CREATE |
549			   NL80211_FEATURE_USERSPACE_MPM;
550
551	if (!ops->hw_scan)
552		wiphy->features |= NL80211_FEATURE_LOW_PRIORITY_SCAN |
553				   NL80211_FEATURE_AP_SCAN;
554
555
556	if (!ops->set_key)
557		wiphy->flags |= WIPHY_FLAG_IBSS_RSN;
558
559	wiphy->bss_priv_size = sizeof(struct ieee80211_bss);
560
561	local = wiphy_priv(wiphy);
562
563	if (sta_info_init(local))
564		goto err_free;
565
566	local->hw.wiphy = wiphy;
567
568	local->hw.priv = (char *)local + ALIGN(sizeof(*local), NETDEV_ALIGN);
569
570	local->ops = ops;
571	local->use_chanctx = use_chanctx;
572
573	/* set up some defaults */
574	local->hw.queues = 1;
575	local->hw.max_rates = 1;
576	local->hw.max_report_rates = 0;
577	local->hw.max_rx_aggregation_subframes = IEEE80211_MAX_AMPDU_BUF;
578	local->hw.max_tx_aggregation_subframes = IEEE80211_MAX_AMPDU_BUF;
579	local->hw.offchannel_tx_hw_queue = IEEE80211_INVAL_HW_QUEUE;
580	local->hw.conf.long_frame_max_tx_count = wiphy->retry_long;
581	local->hw.conf.short_frame_max_tx_count = wiphy->retry_short;
582	local->hw.radiotap_mcs_details = IEEE80211_RADIOTAP_MCS_HAVE_MCS |
583					 IEEE80211_RADIOTAP_MCS_HAVE_GI |
584					 IEEE80211_RADIOTAP_MCS_HAVE_BW;
585	local->hw.radiotap_vht_details = IEEE80211_RADIOTAP_VHT_KNOWN_GI |
586					 IEEE80211_RADIOTAP_VHT_KNOWN_BANDWIDTH;
587	local->hw.uapsd_queues = IEEE80211_DEFAULT_UAPSD_QUEUES;
588	local->hw.uapsd_max_sp_len = IEEE80211_DEFAULT_MAX_SP_LEN;
589	local->user_power_level = IEEE80211_UNSET_POWER_LEVEL;
590	wiphy->ht_capa_mod_mask = &mac80211_ht_capa_mod_mask;
591	wiphy->vht_capa_mod_mask = &mac80211_vht_capa_mod_mask;
592
593	local->ext_capa[7] = WLAN_EXT_CAPA8_OPMODE_NOTIF;
594
595	wiphy->extended_capabilities = local->ext_capa;
596	wiphy->extended_capabilities_mask = local->ext_capa;
597	wiphy->extended_capabilities_len =
598		ARRAY_SIZE(local->ext_capa);
599
600	INIT_LIST_HEAD(&local->interfaces);
601
602	__hw_addr_init(&local->mc_list);
603
604	mutex_init(&local->iflist_mtx);
605	mutex_init(&local->mtx);
606
607	mutex_init(&local->key_mtx);
608	spin_lock_init(&local->filter_lock);
609	spin_lock_init(&local->rx_path_lock);
610	spin_lock_init(&local->queue_stop_reason_lock);
611
612	INIT_LIST_HEAD(&local->chanctx_list);
613	mutex_init(&local->chanctx_mtx);
614
615	INIT_DELAYED_WORK(&local->scan_work, ieee80211_scan_work);
616
617	INIT_WORK(&local->restart_work, ieee80211_restart_work);
618
619	INIT_WORK(&local->radar_detected_work,
620		  ieee80211_dfs_radar_detected_work);
621
622	INIT_WORK(&local->reconfig_filter, ieee80211_reconfig_filter);
623	local->smps_mode = IEEE80211_SMPS_OFF;
624
625	INIT_WORK(&local->dynamic_ps_enable_work,
626		  ieee80211_dynamic_ps_enable_work);
627	INIT_WORK(&local->dynamic_ps_disable_work,
628		  ieee80211_dynamic_ps_disable_work);
629	setup_timer(&local->dynamic_ps_timer,
630		    ieee80211_dynamic_ps_timer, (unsigned long) local);
631
632	INIT_WORK(&local->sched_scan_stopped_work,
633		  ieee80211_sched_scan_stopped_work);
634
635	spin_lock_init(&local->ack_status_lock);
636	idr_init(&local->ack_status_frames);
637
638	for (i = 0; i < IEEE80211_MAX_QUEUES; i++) {
639		skb_queue_head_init(&local->pending[i]);
640		atomic_set(&local->agg_queue_stop[i], 0);
641	}
642	tasklet_init(&local->tx_pending_tasklet, ieee80211_tx_pending,
643		     (unsigned long)local);
644
645	tasklet_init(&local->tasklet,
646		     ieee80211_tasklet_handler,
647		     (unsigned long) local);
648
649	skb_queue_head_init(&local->skb_queue);
650	skb_queue_head_init(&local->skb_queue_unreliable);
651
652	ieee80211_led_names(local);
653
654	ieee80211_roc_setup(local);
655
656	return &local->hw;
657 err_free:
658	wiphy_free(wiphy);
659	return NULL;
660}
661EXPORT_SYMBOL(ieee80211_alloc_hw_nm);
662
663static int ieee80211_init_cipher_suites(struct ieee80211_local *local)
664{
665	bool have_wep = !(IS_ERR(local->wep_tx_tfm) ||
666			  IS_ERR(local->wep_rx_tfm));
667	bool have_mfp = local->hw.flags & IEEE80211_HW_MFP_CAPABLE;
668	int n_suites = 0, r = 0, w = 0;
669	u32 *suites;
670	static const u32 cipher_suites[] = {
671		/* keep WEP first, it may be removed below */
672		WLAN_CIPHER_SUITE_WEP40,
673		WLAN_CIPHER_SUITE_WEP104,
674		WLAN_CIPHER_SUITE_TKIP,
675		WLAN_CIPHER_SUITE_CCMP,
676		WLAN_CIPHER_SUITE_CCMP_256,
677		WLAN_CIPHER_SUITE_GCMP,
678		WLAN_CIPHER_SUITE_GCMP_256,
679
680		/* keep last -- depends on hw flags! */
681		WLAN_CIPHER_SUITE_AES_CMAC,
682		WLAN_CIPHER_SUITE_BIP_CMAC_256,
683		WLAN_CIPHER_SUITE_BIP_GMAC_128,
684		WLAN_CIPHER_SUITE_BIP_GMAC_256,
685	};
686
687	if (local->hw.flags & IEEE80211_HW_SW_CRYPTO_CONTROL ||
688	    local->hw.wiphy->cipher_suites) {
689		/* If the driver advertises, or doesn't support SW crypto,
690		 * we only need to remove WEP if necessary.
691		 */
692		if (have_wep)
693			return 0;
694
695		/* well if it has _no_ ciphers ... fine */
696		if (!local->hw.wiphy->n_cipher_suites)
697			return 0;
698
699		/* Driver provides cipher suites, but we need to exclude WEP */
700		suites = kmemdup(local->hw.wiphy->cipher_suites,
701				 sizeof(u32) * local->hw.wiphy->n_cipher_suites,
702				 GFP_KERNEL);
703		if (!suites)
704			return -ENOMEM;
705
706		for (r = 0; r < local->hw.wiphy->n_cipher_suites; r++) {
707			u32 suite = local->hw.wiphy->cipher_suites[r];
708
709			if (suite == WLAN_CIPHER_SUITE_WEP40 ||
710			    suite == WLAN_CIPHER_SUITE_WEP104)
711				continue;
712			suites[w++] = suite;
713		}
714	} else if (!local->hw.cipher_schemes) {
715		/* If the driver doesn't have cipher schemes, there's nothing
716		 * else to do other than assign the (software supported and
717		 * perhaps offloaded) cipher suites.
718		 */
719		local->hw.wiphy->cipher_suites = cipher_suites;
720		local->hw.wiphy->n_cipher_suites = ARRAY_SIZE(cipher_suites);
721
722		if (!have_mfp)
723			local->hw.wiphy->n_cipher_suites -= 4;
724
725		if (!have_wep) {
726			local->hw.wiphy->cipher_suites += 2;
727			local->hw.wiphy->n_cipher_suites -= 2;
728		}
729
730		/* not dynamically allocated, so just return */
731		return 0;
732	} else {
733		const struct ieee80211_cipher_scheme *cs;
734
735		cs = local->hw.cipher_schemes;
736
737		/* Driver specifies cipher schemes only (but not cipher suites
738		 * including the schemes)
739		 *
740		 * We start counting ciphers defined by schemes, TKIP, CCMP,
741		 * CCMP-256, GCMP, and GCMP-256
742		 */
743		n_suites = local->hw.n_cipher_schemes + 5;
744
745		/* check if we have WEP40 and WEP104 */
746		if (have_wep)
747			n_suites += 2;
748
749		/* check if we have AES_CMAC, BIP-CMAC-256, BIP-GMAC-128,
750		 * BIP-GMAC-256
751		 */
752		if (have_mfp)
753			n_suites += 4;
754
755		suites = kmalloc(sizeof(u32) * n_suites, GFP_KERNEL);
756		if (!suites)
757			return -ENOMEM;
758
759		suites[w++] = WLAN_CIPHER_SUITE_CCMP;
760		suites[w++] = WLAN_CIPHER_SUITE_CCMP_256;
761		suites[w++] = WLAN_CIPHER_SUITE_TKIP;
762		suites[w++] = WLAN_CIPHER_SUITE_GCMP;
763		suites[w++] = WLAN_CIPHER_SUITE_GCMP_256;
764
765		if (have_wep) {
766			suites[w++] = WLAN_CIPHER_SUITE_WEP40;
767			suites[w++] = WLAN_CIPHER_SUITE_WEP104;
768		}
769
770		if (have_mfp) {
771			suites[w++] = WLAN_CIPHER_SUITE_AES_CMAC;
772			suites[w++] = WLAN_CIPHER_SUITE_BIP_CMAC_256;
773			suites[w++] = WLAN_CIPHER_SUITE_BIP_GMAC_128;
774			suites[w++] = WLAN_CIPHER_SUITE_BIP_GMAC_256;
775		}
776
777		for (r = 0; r < local->hw.n_cipher_schemes; r++)
778			suites[w++] = cs[r].cipher;
779	}
780
781	local->hw.wiphy->cipher_suites = suites;
782	local->hw.wiphy->n_cipher_suites = w;
783	local->wiphy_ciphers_allocated = true;
784
785	return 0;
786}
787
788int ieee80211_register_hw(struct ieee80211_hw *hw)
789{
790	struct ieee80211_local *local = hw_to_local(hw);
791	int result, i;
792	enum ieee80211_band band;
793	int channels, max_bitrates;
794	bool supp_ht, supp_vht;
795	netdev_features_t feature_whitelist;
796	struct cfg80211_chan_def dflt_chandef = {};
797
798	if (hw->flags & IEEE80211_HW_QUEUE_CONTROL &&
799	    (local->hw.offchannel_tx_hw_queue == IEEE80211_INVAL_HW_QUEUE ||
800	     local->hw.offchannel_tx_hw_queue >= local->hw.queues))
801		return -EINVAL;
802
803	if ((hw->wiphy->features & NL80211_FEATURE_TDLS_CHANNEL_SWITCH) &&
804	    (!local->ops->tdls_channel_switch ||
805	     !local->ops->tdls_cancel_channel_switch ||
806	     !local->ops->tdls_recv_channel_switch))
807		return -EOPNOTSUPP;
808
809#ifdef CONFIG_PM
810	if (hw->wiphy->wowlan && (!local->ops->suspend || !local->ops->resume))
811		return -EINVAL;
812#endif
813
814	if (!local->use_chanctx) {
815		for (i = 0; i < local->hw.wiphy->n_iface_combinations; i++) {
816			const struct ieee80211_iface_combination *comb;
817
818			comb = &local->hw.wiphy->iface_combinations[i];
819
820			if (comb->num_different_channels > 1)
821				return -EINVAL;
822		}
823	} else {
824		/*
825		 * WDS is currently prohibited when channel contexts are used
826		 * because there's no clear definition of which channel WDS
827		 * type interfaces use
828		 */
829		if (local->hw.wiphy->interface_modes & BIT(NL80211_IFTYPE_WDS))
830			return -EINVAL;
831
832		/* DFS is not supported with multi-channel combinations yet */
833		for (i = 0; i < local->hw.wiphy->n_iface_combinations; i++) {
834			const struct ieee80211_iface_combination *comb;
835
836			comb = &local->hw.wiphy->iface_combinations[i];
837
838			if (comb->radar_detect_widths &&
839			    comb->num_different_channels > 1)
840				return -EINVAL;
841		}
842	}
843
844	/* Only HW csum features are currently compatible with mac80211 */
845	feature_whitelist = NETIF_F_IP_CSUM | NETIF_F_IPV6_CSUM |
846			    NETIF_F_HW_CSUM;
847	if (WARN_ON(hw->netdev_features & ~feature_whitelist))
848		return -EINVAL;
849
850	if (hw->max_report_rates == 0)
851		hw->max_report_rates = hw->max_rates;
852
853	local->rx_chains = 1;
854
855	/*
856	 * generic code guarantees at least one band,
857	 * set this very early because much code assumes
858	 * that hw.conf.channel is assigned
859	 */
860	channels = 0;
861	max_bitrates = 0;
862	supp_ht = false;
863	supp_vht = false;
864	for (band = 0; band < IEEE80211_NUM_BANDS; band++) {
865		struct ieee80211_supported_band *sband;
866
867		sband = local->hw.wiphy->bands[band];
868		if (!sband)
869			continue;
870
871		if (!dflt_chandef.chan) {
872			cfg80211_chandef_create(&dflt_chandef,
873						&sband->channels[0],
874						NL80211_CHAN_NO_HT);
875			/* init channel we're on */
876			if (!local->use_chanctx && !local->_oper_chandef.chan) {
877				local->hw.conf.chandef = dflt_chandef;
878				local->_oper_chandef = dflt_chandef;
879			}
880			local->monitor_chandef = dflt_chandef;
881		}
882
883		channels += sband->n_channels;
884
885		if (max_bitrates < sband->n_bitrates)
886			max_bitrates = sband->n_bitrates;
887		supp_ht = supp_ht || sband->ht_cap.ht_supported;
888		supp_vht = supp_vht || sband->vht_cap.vht_supported;
889
890		if (sband->ht_cap.ht_supported)
891			local->rx_chains =
892				max(ieee80211_mcs_to_chains(&sband->ht_cap.mcs),
893				    local->rx_chains);
894
895		/* TODO: consider VHT for RX chains, hopefully it's the same */
896	}
897
898	/* if low-level driver supports AP, we also support VLAN */
899	if (local->hw.wiphy->interface_modes & BIT(NL80211_IFTYPE_AP)) {
900		hw->wiphy->interface_modes |= BIT(NL80211_IFTYPE_AP_VLAN);
901		hw->wiphy->software_iftypes |= BIT(NL80211_IFTYPE_AP_VLAN);
902	}
903
904	/* mac80211 always supports monitor */
905	hw->wiphy->interface_modes |= BIT(NL80211_IFTYPE_MONITOR);
906	hw->wiphy->software_iftypes |= BIT(NL80211_IFTYPE_MONITOR);
907
908	/* mac80211 doesn't support more than one IBSS interface right now */
909	for (i = 0; i < hw->wiphy->n_iface_combinations; i++) {
910		const struct ieee80211_iface_combination *c;
911		int j;
912
913		c = &hw->wiphy->iface_combinations[i];
914
915		for (j = 0; j < c->n_limits; j++)
916			if ((c->limits[j].types & BIT(NL80211_IFTYPE_ADHOC)) &&
917			    c->limits[j].max > 1)
918				return -EINVAL;
919	}
920
921	local->int_scan_req = kzalloc(sizeof(*local->int_scan_req) +
922				      sizeof(void *) * channels, GFP_KERNEL);
923	if (!local->int_scan_req)
924		return -ENOMEM;
925
926	for (band = 0; band < IEEE80211_NUM_BANDS; band++) {
927		if (!local->hw.wiphy->bands[band])
928			continue;
929		local->int_scan_req->rates[band] = (u32) -1;
930	}
931
932#ifndef CONFIG_MAC80211_MESH
933	/* mesh depends on Kconfig, but drivers should set it if they want */
934	local->hw.wiphy->interface_modes &= ~BIT(NL80211_IFTYPE_MESH_POINT);
935#endif
936
937	/* if the underlying driver supports mesh, mac80211 will (at least)
938	 * provide routing of mesh authentication frames to userspace */
939	if (local->hw.wiphy->interface_modes & BIT(NL80211_IFTYPE_MESH_POINT))
940		local->hw.wiphy->flags |= WIPHY_FLAG_MESH_AUTH;
941
942	/* mac80211 supports control port protocol changing */
943	local->hw.wiphy->flags |= WIPHY_FLAG_CONTROL_PORT_PROTOCOL;
944
945	if (local->hw.flags & IEEE80211_HW_SIGNAL_DBM) {
946		local->hw.wiphy->signal_type = CFG80211_SIGNAL_TYPE_MBM;
947	} else if (local->hw.flags & IEEE80211_HW_SIGNAL_UNSPEC) {
948		local->hw.wiphy->signal_type = CFG80211_SIGNAL_TYPE_UNSPEC;
949		if (hw->max_signal <= 0) {
950			result = -EINVAL;
951			goto fail_wiphy_register;
952		}
953	}
954
955	/*
956	 * Calculate scan IE length -- we need this to alloc
957	 * memory and to subtract from the driver limit. It
958	 * includes the DS Params, (extended) supported rates, and HT
959	 * information -- SSID is the driver's responsibility.
960	 */
961	local->scan_ies_len = 4 + max_bitrates /* (ext) supp rates */ +
962		3 /* DS Params */;
963	if (supp_ht)
964		local->scan_ies_len += 2 + sizeof(struct ieee80211_ht_cap);
965
966	if (supp_vht)
967		local->scan_ies_len +=
968			2 + sizeof(struct ieee80211_vht_cap);
969
970	if (!local->ops->hw_scan) {
971		/* For hw_scan, driver needs to set these up. */
972		local->hw.wiphy->max_scan_ssids = 4;
973		local->hw.wiphy->max_scan_ie_len = IEEE80211_MAX_DATA_LEN;
974	}
975
976	/*
977	 * If the driver supports any scan IEs, then assume the
978	 * limit includes the IEs mac80211 will add, otherwise
979	 * leave it at zero and let the driver sort it out; we
980	 * still pass our IEs to the driver but userspace will
981	 * not be allowed to in that case.
982	 */
983	if (local->hw.wiphy->max_scan_ie_len)
984		local->hw.wiphy->max_scan_ie_len -= local->scan_ies_len;
985
986	WARN_ON(!ieee80211_cs_list_valid(local->hw.cipher_schemes,
987					 local->hw.n_cipher_schemes));
988
989	result = ieee80211_init_cipher_suites(local);
990	if (result < 0)
991		goto fail_wiphy_register;
992
993	if (!local->ops->remain_on_channel)
994		local->hw.wiphy->max_remain_on_channel_duration = 5000;
995
996	/* mac80211 based drivers don't support internal TDLS setup */
997	if (local->hw.wiphy->flags & WIPHY_FLAG_SUPPORTS_TDLS)
998		local->hw.wiphy->flags |= WIPHY_FLAG_TDLS_EXTERNAL_SETUP;
999
1000	/* mac80211 supports eCSA, if the driver supports STA CSA at all */
1001	if (local->hw.flags & IEEE80211_HW_CHANCTX_STA_CSA)
1002		local->ext_capa[0] |= WLAN_EXT_CAPA1_EXT_CHANNEL_SWITCHING;
1003
1004	local->hw.wiphy->max_num_csa_counters = IEEE80211_MAX_CSA_COUNTERS_NUM;
1005
1006	result = wiphy_register(local->hw.wiphy);
1007	if (result < 0)
1008		goto fail_wiphy_register;
1009
1010	/*
1011	 * We use the number of queues for feature tests (QoS, HT) internally
1012	 * so restrict them appropriately.
1013	 */
1014	if (hw->queues > IEEE80211_MAX_QUEUES)
1015		hw->queues = IEEE80211_MAX_QUEUES;
1016
1017	local->workqueue =
1018		alloc_ordered_workqueue("%s", 0, wiphy_name(local->hw.wiphy));
1019	if (!local->workqueue) {
1020		result = -ENOMEM;
1021		goto fail_workqueue;
1022	}
1023
1024	/*
1025	 * The hardware needs headroom for sending the frame,
1026	 * and we need some headroom for passing the frame to monitor
1027	 * interfaces, but never both at the same time.
1028	 */
1029	local->tx_headroom = max_t(unsigned int , local->hw.extra_tx_headroom,
1030				   IEEE80211_TX_STATUS_HEADROOM);
1031
1032	debugfs_hw_add(local);
1033
1034	/*
1035	 * if the driver doesn't specify a max listen interval we
1036	 * use 5 which should be a safe default
1037	 */
1038	if (local->hw.max_listen_interval == 0)
1039		local->hw.max_listen_interval = 5;
1040
1041	local->hw.conf.listen_interval = local->hw.max_listen_interval;
1042
1043	local->dynamic_ps_forced_timeout = -1;
1044
1045	if (!local->hw.txq_ac_max_pending)
1046		local->hw.txq_ac_max_pending = 64;
1047
1048	result = ieee80211_wep_init(local);
1049	if (result < 0)
1050		wiphy_debug(local->hw.wiphy, "Failed to initialize wep: %d\n",
1051			    result);
1052
1053	local->hw.conf.flags = IEEE80211_CONF_IDLE;
1054
1055	ieee80211_led_init(local);
1056
1057	rtnl_lock();
1058
1059	result = ieee80211_init_rate_ctrl_alg(local,
1060					      hw->rate_control_algorithm);
1061	if (result < 0) {
1062		wiphy_debug(local->hw.wiphy,
1063			    "Failed to initialize rate control algorithm\n");
1064		goto fail_rate;
1065	}
1066
1067	/* add one default STA interface if supported */
1068	if (local->hw.wiphy->interface_modes & BIT(NL80211_IFTYPE_STATION) &&
1069	    !(hw->flags & IEEE80211_HW_NO_AUTO_VIF)) {
1070		result = ieee80211_if_add(local, "wlan%d", NET_NAME_ENUM, NULL,
1071					  NL80211_IFTYPE_STATION, NULL);
1072		if (result)
1073			wiphy_warn(local->hw.wiphy,
1074				   "Failed to add default virtual iface\n");
1075	}
1076
1077	rtnl_unlock();
1078
1079	local->network_latency_notifier.notifier_call =
1080		ieee80211_max_network_latency;
1081	result = pm_qos_add_notifier(PM_QOS_NETWORK_LATENCY,
1082				     &local->network_latency_notifier);
1083	if (result)
1084		goto fail_pm_qos;
1085
1086#ifdef CONFIG_INET
1087	local->ifa_notifier.notifier_call = ieee80211_ifa_changed;
1088	result = register_inetaddr_notifier(&local->ifa_notifier);
1089	if (result)
1090		goto fail_ifa;
1091#endif
1092
1093#if IS_ENABLED(CONFIG_IPV6)
1094	local->ifa6_notifier.notifier_call = ieee80211_ifa6_changed;
1095	result = register_inet6addr_notifier(&local->ifa6_notifier);
1096	if (result)
1097		goto fail_ifa6;
1098#endif
1099
1100	return 0;
1101
1102#if IS_ENABLED(CONFIG_IPV6)
1103 fail_ifa6:
1104#ifdef CONFIG_INET
1105	unregister_inetaddr_notifier(&local->ifa_notifier);
1106#endif
1107#endif
1108#if defined(CONFIG_INET) || defined(CONFIG_IPV6)
1109 fail_ifa:
1110	pm_qos_remove_notifier(PM_QOS_NETWORK_LATENCY,
1111			       &local->network_latency_notifier);
1112#endif
1113 fail_pm_qos:
1114	rtnl_lock();
1115	rate_control_deinitialize(local);
1116	ieee80211_remove_interfaces(local);
1117 fail_rate:
1118	rtnl_unlock();
1119	ieee80211_led_exit(local);
1120	ieee80211_wep_free(local);
1121	destroy_workqueue(local->workqueue);
1122 fail_workqueue:
1123	wiphy_unregister(local->hw.wiphy);
1124 fail_wiphy_register:
1125	if (local->wiphy_ciphers_allocated)
1126		kfree(local->hw.wiphy->cipher_suites);
1127	kfree(local->int_scan_req);
1128	return result;
1129}
1130EXPORT_SYMBOL(ieee80211_register_hw);
1131
1132void ieee80211_napi_add(struct ieee80211_hw *hw, struct napi_struct *napi,
1133			struct net_device *napi_dev,
1134			int (*poll)(struct napi_struct *, int),
1135			int weight)
1136{
1137	struct ieee80211_local *local = hw_to_local(hw);
1138
1139	netif_napi_add(napi_dev, napi, poll, weight);
1140	local->napi = napi;
1141}
1142EXPORT_SYMBOL_GPL(ieee80211_napi_add);
1143
1144void ieee80211_unregister_hw(struct ieee80211_hw *hw)
1145{
1146	struct ieee80211_local *local = hw_to_local(hw);
1147
1148	tasklet_kill(&local->tx_pending_tasklet);
1149	tasklet_kill(&local->tasklet);
1150
1151	pm_qos_remove_notifier(PM_QOS_NETWORK_LATENCY,
1152			       &local->network_latency_notifier);
1153#ifdef CONFIG_INET
1154	unregister_inetaddr_notifier(&local->ifa_notifier);
1155#endif
1156#if IS_ENABLED(CONFIG_IPV6)
1157	unregister_inet6addr_notifier(&local->ifa6_notifier);
1158#endif
1159
1160	rtnl_lock();
1161
1162	/*
1163	 * At this point, interface list manipulations are fine
1164	 * because the driver cannot be handing us frames any
1165	 * more and the tasklet is killed.
1166	 */
1167	ieee80211_remove_interfaces(local);
1168
1169	rtnl_unlock();
1170
1171	cancel_work_sync(&local->restart_work);
1172	cancel_work_sync(&local->reconfig_filter);
1173	flush_work(&local->sched_scan_stopped_work);
1174
1175	ieee80211_clear_tx_pending(local);
1176	rate_control_deinitialize(local);
1177
1178	if (skb_queue_len(&local->skb_queue) ||
1179	    skb_queue_len(&local->skb_queue_unreliable))
1180		wiphy_warn(local->hw.wiphy, "skb_queue not empty\n");
1181	skb_queue_purge(&local->skb_queue);
1182	skb_queue_purge(&local->skb_queue_unreliable);
1183
1184	destroy_workqueue(local->workqueue);
1185	wiphy_unregister(local->hw.wiphy);
1186	ieee80211_wep_free(local);
1187	ieee80211_led_exit(local);
1188	kfree(local->int_scan_req);
1189}
1190EXPORT_SYMBOL(ieee80211_unregister_hw);
1191
1192static int ieee80211_free_ack_frame(int id, void *p, void *data)
1193{
1194	WARN_ONCE(1, "Have pending ack frames!\n");
1195	kfree_skb(p);
1196	return 0;
1197}
1198
1199void ieee80211_free_hw(struct ieee80211_hw *hw)
1200{
1201	struct ieee80211_local *local = hw_to_local(hw);
1202
1203	mutex_destroy(&local->iflist_mtx);
1204	mutex_destroy(&local->mtx);
1205
1206	if (local->wiphy_ciphers_allocated)
1207		kfree(local->hw.wiphy->cipher_suites);
1208
1209	idr_for_each(&local->ack_status_frames,
1210		     ieee80211_free_ack_frame, NULL);
1211	idr_destroy(&local->ack_status_frames);
1212
1213	sta_info_stop(local);
1214
1215	wiphy_free(local->hw.wiphy);
1216}
1217EXPORT_SYMBOL(ieee80211_free_hw);
1218
1219static int __init ieee80211_init(void)
1220{
1221	struct sk_buff *skb;
1222	int ret;
1223
1224	BUILD_BUG_ON(sizeof(struct ieee80211_tx_info) > sizeof(skb->cb));
1225	BUILD_BUG_ON(offsetof(struct ieee80211_tx_info, driver_data) +
1226		     IEEE80211_TX_INFO_DRIVER_DATA_SIZE > sizeof(skb->cb));
1227
1228	ret = rc80211_minstrel_init();
1229	if (ret)
1230		return ret;
1231
1232	ret = rc80211_minstrel_ht_init();
1233	if (ret)
1234		goto err_minstrel;
1235
1236	ret = ieee80211_iface_init();
1237	if (ret)
1238		goto err_netdev;
1239
1240	return 0;
1241 err_netdev:
1242	rc80211_minstrel_ht_exit();
1243 err_minstrel:
1244	rc80211_minstrel_exit();
1245
1246	return ret;
1247}
1248
1249static void __exit ieee80211_exit(void)
1250{
1251	rc80211_minstrel_ht_exit();
1252	rc80211_minstrel_exit();
1253
1254	ieee80211s_stop();
1255
1256	ieee80211_iface_exit();
1257
1258	rcu_barrier();
1259}
1260
1261
1262subsys_initcall(ieee80211_init);
1263module_exit(ieee80211_exit);
1264
1265MODULE_DESCRIPTION("IEEE 802.11 subsystem");
1266MODULE_LICENSE("GPL");
1267