1 /*
2  * multipath.c : Multiple Devices driver for Linux
3  *
4  * Copyright (C) 1999, 2000, 2001 Ingo Molnar, Red Hat
5  *
6  * Copyright (C) 1996, 1997, 1998 Ingo Molnar, Miguel de Icaza, Gadi Oxman
7  *
8  * MULTIPATH management functions.
9  *
10  * derived from raid1.c.
11  *
12  * This program is free software; you can redistribute it and/or modify
13  * it under the terms of the GNU General Public License as published by
14  * the Free Software Foundation; either version 2, or (at your option)
15  * any later version.
16  *
17  * You should have received a copy of the GNU General Public License
18  * (for example /usr/src/linux/COPYING); if not, write to the Free
19  * Software Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
20  */
21 
22 #include <linux/blkdev.h>
23 #include <linux/module.h>
24 #include <linux/raid/md_u.h>
25 #include <linux/seq_file.h>
26 #include <linux/slab.h>
27 #include "md.h"
28 #include "multipath.h"
29 
30 #define MAX_WORK_PER_DISK 128
31 
32 #define	NR_RESERVED_BUFS	32
33 
multipath_map(struct mpconf * conf)34 static int multipath_map (struct mpconf *conf)
35 {
36 	int i, disks = conf->raid_disks;
37 
38 	/*
39 	 * Later we do read balancing on the read side
40 	 * now we use the first available disk.
41 	 */
42 
43 	rcu_read_lock();
44 	for (i = 0; i < disks; i++) {
45 		struct md_rdev *rdev = rcu_dereference(conf->multipaths[i].rdev);
46 		if (rdev && test_bit(In_sync, &rdev->flags)) {
47 			atomic_inc(&rdev->nr_pending);
48 			rcu_read_unlock();
49 			return i;
50 		}
51 	}
52 	rcu_read_unlock();
53 
54 	printk(KERN_ERR "multipath_map(): no more operational IO paths?\n");
55 	return (-1);
56 }
57 
multipath_reschedule_retry(struct multipath_bh * mp_bh)58 static void multipath_reschedule_retry (struct multipath_bh *mp_bh)
59 {
60 	unsigned long flags;
61 	struct mddev *mddev = mp_bh->mddev;
62 	struct mpconf *conf = mddev->private;
63 
64 	spin_lock_irqsave(&conf->device_lock, flags);
65 	list_add(&mp_bh->retry_list, &conf->retry_list);
66 	spin_unlock_irqrestore(&conf->device_lock, flags);
67 	md_wakeup_thread(mddev->thread);
68 }
69 
70 /*
71  * multipath_end_bh_io() is called when we have finished servicing a multipathed
72  * operation and are ready to return a success/failure code to the buffer
73  * cache layer.
74  */
multipath_end_bh_io(struct multipath_bh * mp_bh,int err)75 static void multipath_end_bh_io (struct multipath_bh *mp_bh, int err)
76 {
77 	struct bio *bio = mp_bh->master_bio;
78 	struct mpconf *conf = mp_bh->mddev->private;
79 
80 	bio->bi_error = err;
81 	bio_endio(bio);
82 	mempool_free(mp_bh, conf->pool);
83 }
84 
multipath_end_request(struct bio * bio)85 static void multipath_end_request(struct bio *bio)
86 {
87 	struct multipath_bh *mp_bh = bio->bi_private;
88 	struct mpconf *conf = mp_bh->mddev->private;
89 	struct md_rdev *rdev = conf->multipaths[mp_bh->path].rdev;
90 
91 	if (!bio->bi_error)
92 		multipath_end_bh_io(mp_bh, 0);
93 	else if (!(bio->bi_rw & REQ_RAHEAD)) {
94 		/*
95 		 * oops, IO error:
96 		 */
97 		char b[BDEVNAME_SIZE];
98 		md_error (mp_bh->mddev, rdev);
99 		printk(KERN_ERR "multipath: %s: rescheduling sector %llu\n",
100 		       bdevname(rdev->bdev,b),
101 		       (unsigned long long)bio->bi_iter.bi_sector);
102 		multipath_reschedule_retry(mp_bh);
103 	} else
104 		multipath_end_bh_io(mp_bh, bio->bi_error);
105 	rdev_dec_pending(rdev, conf->mddev);
106 }
107 
multipath_make_request(struct mddev * mddev,struct bio * bio)108 static void multipath_make_request(struct mddev *mddev, struct bio * bio)
109 {
110 	struct mpconf *conf = mddev->private;
111 	struct multipath_bh * mp_bh;
112 	struct multipath_info *multipath;
113 
114 	if (unlikely(bio->bi_rw & REQ_FLUSH)) {
115 		md_flush_request(mddev, bio);
116 		return;
117 	}
118 
119 	mp_bh = mempool_alloc(conf->pool, GFP_NOIO);
120 
121 	mp_bh->master_bio = bio;
122 	mp_bh->mddev = mddev;
123 
124 	mp_bh->path = multipath_map(conf);
125 	if (mp_bh->path < 0) {
126 		bio_io_error(bio);
127 		mempool_free(mp_bh, conf->pool);
128 		return;
129 	}
130 	multipath = conf->multipaths + mp_bh->path;
131 
132 	bio_init(&mp_bh->bio);
133 	__bio_clone_fast(&mp_bh->bio, bio);
134 
135 	mp_bh->bio.bi_iter.bi_sector += multipath->rdev->data_offset;
136 	mp_bh->bio.bi_bdev = multipath->rdev->bdev;
137 	mp_bh->bio.bi_rw |= REQ_FAILFAST_TRANSPORT;
138 	mp_bh->bio.bi_end_io = multipath_end_request;
139 	mp_bh->bio.bi_private = mp_bh;
140 	generic_make_request(&mp_bh->bio);
141 	return;
142 }
143 
multipath_status(struct seq_file * seq,struct mddev * mddev)144 static void multipath_status (struct seq_file *seq, struct mddev *mddev)
145 {
146 	struct mpconf *conf = mddev->private;
147 	int i;
148 
149 	seq_printf (seq, " [%d/%d] [", conf->raid_disks,
150 		    conf->raid_disks - mddev->degraded);
151 	for (i = 0; i < conf->raid_disks; i++)
152 		seq_printf (seq, "%s",
153 			       conf->multipaths[i].rdev &&
154 			       test_bit(In_sync, &conf->multipaths[i].rdev->flags) ? "U" : "_");
155 	seq_printf (seq, "]");
156 }
157 
multipath_congested(struct mddev * mddev,int bits)158 static int multipath_congested(struct mddev *mddev, int bits)
159 {
160 	struct mpconf *conf = mddev->private;
161 	int i, ret = 0;
162 
163 	rcu_read_lock();
164 	for (i = 0; i < mddev->raid_disks ; i++) {
165 		struct md_rdev *rdev = rcu_dereference(conf->multipaths[i].rdev);
166 		if (rdev && !test_bit(Faulty, &rdev->flags)) {
167 			struct request_queue *q = bdev_get_queue(rdev->bdev);
168 
169 			ret |= bdi_congested(&q->backing_dev_info, bits);
170 			/* Just like multipath_map, we just check the
171 			 * first available device
172 			 */
173 			break;
174 		}
175 	}
176 	rcu_read_unlock();
177 	return ret;
178 }
179 
180 /*
181  * Careful, this can execute in IRQ contexts as well!
182  */
multipath_error(struct mddev * mddev,struct md_rdev * rdev)183 static void multipath_error (struct mddev *mddev, struct md_rdev *rdev)
184 {
185 	struct mpconf *conf = mddev->private;
186 	char b[BDEVNAME_SIZE];
187 
188 	if (conf->raid_disks - mddev->degraded <= 1) {
189 		/*
190 		 * Uh oh, we can do nothing if this is our last path, but
191 		 * first check if this is a queued request for a device
192 		 * which has just failed.
193 		 */
194 		printk(KERN_ALERT
195 		       "multipath: only one IO path left and IO error.\n");
196 		/* leave it active... it's all we have */
197 		return;
198 	}
199 	/*
200 	 * Mark disk as unusable
201 	 */
202 	if (test_and_clear_bit(In_sync, &rdev->flags)) {
203 		unsigned long flags;
204 		spin_lock_irqsave(&conf->device_lock, flags);
205 		mddev->degraded++;
206 		spin_unlock_irqrestore(&conf->device_lock, flags);
207 	}
208 	set_bit(Faulty, &rdev->flags);
209 	set_bit(MD_CHANGE_DEVS, &mddev->flags);
210 	printk(KERN_ALERT "multipath: IO failure on %s,"
211 	       " disabling IO path.\n"
212 	       "multipath: Operation continuing"
213 	       " on %d IO paths.\n",
214 	       bdevname(rdev->bdev, b),
215 	       conf->raid_disks - mddev->degraded);
216 }
217 
print_multipath_conf(struct mpconf * conf)218 static void print_multipath_conf (struct mpconf *conf)
219 {
220 	int i;
221 	struct multipath_info *tmp;
222 
223 	printk("MULTIPATH conf printout:\n");
224 	if (!conf) {
225 		printk("(conf==NULL)\n");
226 		return;
227 	}
228 	printk(" --- wd:%d rd:%d\n", conf->raid_disks - conf->mddev->degraded,
229 			 conf->raid_disks);
230 
231 	for (i = 0; i < conf->raid_disks; i++) {
232 		char b[BDEVNAME_SIZE];
233 		tmp = conf->multipaths + i;
234 		if (tmp->rdev)
235 			printk(" disk%d, o:%d, dev:%s\n",
236 				i,!test_bit(Faulty, &tmp->rdev->flags),
237 			       bdevname(tmp->rdev->bdev,b));
238 	}
239 }
240 
multipath_add_disk(struct mddev * mddev,struct md_rdev * rdev)241 static int multipath_add_disk(struct mddev *mddev, struct md_rdev *rdev)
242 {
243 	struct mpconf *conf = mddev->private;
244 	struct request_queue *q;
245 	int err = -EEXIST;
246 	int path;
247 	struct multipath_info *p;
248 	int first = 0;
249 	int last = mddev->raid_disks - 1;
250 
251 	if (rdev->raid_disk >= 0)
252 		first = last = rdev->raid_disk;
253 
254 	print_multipath_conf(conf);
255 
256 	for (path = first; path <= last; path++)
257 		if ((p=conf->multipaths+path)->rdev == NULL) {
258 			q = rdev->bdev->bd_disk->queue;
259 			disk_stack_limits(mddev->gendisk, rdev->bdev,
260 					  rdev->data_offset << 9);
261 
262 			err = md_integrity_add_rdev(rdev, mddev);
263 			if (err)
264 				break;
265 			spin_lock_irq(&conf->device_lock);
266 			mddev->degraded--;
267 			rdev->raid_disk = path;
268 			set_bit(In_sync, &rdev->flags);
269 			spin_unlock_irq(&conf->device_lock);
270 			rcu_assign_pointer(p->rdev, rdev);
271 			err = 0;
272 			break;
273 		}
274 
275 	print_multipath_conf(conf);
276 
277 	return err;
278 }
279 
multipath_remove_disk(struct mddev * mddev,struct md_rdev * rdev)280 static int multipath_remove_disk(struct mddev *mddev, struct md_rdev *rdev)
281 {
282 	struct mpconf *conf = mddev->private;
283 	int err = 0;
284 	int number = rdev->raid_disk;
285 	struct multipath_info *p = conf->multipaths + number;
286 
287 	print_multipath_conf(conf);
288 
289 	if (rdev == p->rdev) {
290 		if (test_bit(In_sync, &rdev->flags) ||
291 		    atomic_read(&rdev->nr_pending)) {
292 			printk(KERN_ERR "hot-remove-disk, slot %d is identified"
293 			       " but is still operational!\n", number);
294 			err = -EBUSY;
295 			goto abort;
296 		}
297 		p->rdev = NULL;
298 		synchronize_rcu();
299 		if (atomic_read(&rdev->nr_pending)) {
300 			/* lost the race, try later */
301 			err = -EBUSY;
302 			p->rdev = rdev;
303 			goto abort;
304 		}
305 		err = md_integrity_register(mddev);
306 	}
307 abort:
308 
309 	print_multipath_conf(conf);
310 	return err;
311 }
312 
313 /*
314  * This is a kernel thread which:
315  *
316  *	1.	Retries failed read operations on working multipaths.
317  *	2.	Updates the raid superblock when problems encounter.
318  *	3.	Performs writes following reads for array syncronising.
319  */
320 
multipathd(struct md_thread * thread)321 static void multipathd(struct md_thread *thread)
322 {
323 	struct mddev *mddev = thread->mddev;
324 	struct multipath_bh *mp_bh;
325 	struct bio *bio;
326 	unsigned long flags;
327 	struct mpconf *conf = mddev->private;
328 	struct list_head *head = &conf->retry_list;
329 
330 	md_check_recovery(mddev);
331 	for (;;) {
332 		char b[BDEVNAME_SIZE];
333 		spin_lock_irqsave(&conf->device_lock, flags);
334 		if (list_empty(head))
335 			break;
336 		mp_bh = list_entry(head->prev, struct multipath_bh, retry_list);
337 		list_del(head->prev);
338 		spin_unlock_irqrestore(&conf->device_lock, flags);
339 
340 		bio = &mp_bh->bio;
341 		bio->bi_iter.bi_sector = mp_bh->master_bio->bi_iter.bi_sector;
342 
343 		if ((mp_bh->path = multipath_map (conf))<0) {
344 			printk(KERN_ALERT "multipath: %s: unrecoverable IO read"
345 				" error for block %llu\n",
346 				bdevname(bio->bi_bdev,b),
347 				(unsigned long long)bio->bi_iter.bi_sector);
348 			multipath_end_bh_io(mp_bh, -EIO);
349 		} else {
350 			printk(KERN_ERR "multipath: %s: redirecting sector %llu"
351 				" to another IO path\n",
352 				bdevname(bio->bi_bdev,b),
353 				(unsigned long long)bio->bi_iter.bi_sector);
354 			*bio = *(mp_bh->master_bio);
355 			bio->bi_iter.bi_sector +=
356 				conf->multipaths[mp_bh->path].rdev->data_offset;
357 			bio->bi_bdev = conf->multipaths[mp_bh->path].rdev->bdev;
358 			bio->bi_rw |= REQ_FAILFAST_TRANSPORT;
359 			bio->bi_end_io = multipath_end_request;
360 			bio->bi_private = mp_bh;
361 			generic_make_request(bio);
362 		}
363 	}
364 	spin_unlock_irqrestore(&conf->device_lock, flags);
365 }
366 
multipath_size(struct mddev * mddev,sector_t sectors,int raid_disks)367 static sector_t multipath_size(struct mddev *mddev, sector_t sectors, int raid_disks)
368 {
369 	WARN_ONCE(sectors || raid_disks,
370 		  "%s does not support generic reshape\n", __func__);
371 
372 	return mddev->dev_sectors;
373 }
374 
multipath_run(struct mddev * mddev)375 static int multipath_run (struct mddev *mddev)
376 {
377 	struct mpconf *conf;
378 	int disk_idx;
379 	struct multipath_info *disk;
380 	struct md_rdev *rdev;
381 	int working_disks;
382 
383 	if (md_check_no_bitmap(mddev))
384 		return -EINVAL;
385 
386 	if (mddev->level != LEVEL_MULTIPATH) {
387 		printk("multipath: %s: raid level not set to multipath IO (%d)\n",
388 		       mdname(mddev), mddev->level);
389 		goto out;
390 	}
391 	/*
392 	 * copy the already verified devices into our private MULTIPATH
393 	 * bookkeeping area. [whatever we allocate in multipath_run(),
394 	 * should be freed in multipath_free()]
395 	 */
396 
397 	conf = kzalloc(sizeof(struct mpconf), GFP_KERNEL);
398 	mddev->private = conf;
399 	if (!conf) {
400 		printk(KERN_ERR
401 			"multipath: couldn't allocate memory for %s\n",
402 			mdname(mddev));
403 		goto out;
404 	}
405 
406 	conf->multipaths = kzalloc(sizeof(struct multipath_info)*mddev->raid_disks,
407 				   GFP_KERNEL);
408 	if (!conf->multipaths) {
409 		printk(KERN_ERR
410 			"multipath: couldn't allocate memory for %s\n",
411 			mdname(mddev));
412 		goto out_free_conf;
413 	}
414 
415 	working_disks = 0;
416 	rdev_for_each(rdev, mddev) {
417 		disk_idx = rdev->raid_disk;
418 		if (disk_idx < 0 ||
419 		    disk_idx >= mddev->raid_disks)
420 			continue;
421 
422 		disk = conf->multipaths + disk_idx;
423 		disk->rdev = rdev;
424 		disk_stack_limits(mddev->gendisk, rdev->bdev,
425 				  rdev->data_offset << 9);
426 
427 		if (!test_bit(Faulty, &rdev->flags))
428 			working_disks++;
429 	}
430 
431 	conf->raid_disks = mddev->raid_disks;
432 	conf->mddev = mddev;
433 	spin_lock_init(&conf->device_lock);
434 	INIT_LIST_HEAD(&conf->retry_list);
435 
436 	if (!working_disks) {
437 		printk(KERN_ERR "multipath: no operational IO paths for %s\n",
438 			mdname(mddev));
439 		goto out_free_conf;
440 	}
441 	mddev->degraded = conf->raid_disks - working_disks;
442 
443 	conf->pool = mempool_create_kmalloc_pool(NR_RESERVED_BUFS,
444 						 sizeof(struct multipath_bh));
445 	if (conf->pool == NULL) {
446 		printk(KERN_ERR
447 			"multipath: couldn't allocate memory for %s\n",
448 			mdname(mddev));
449 		goto out_free_conf;
450 	}
451 
452 	{
453 		mddev->thread = md_register_thread(multipathd, mddev,
454 						   "multipath");
455 		if (!mddev->thread) {
456 			printk(KERN_ERR "multipath: couldn't allocate thread"
457 				" for %s\n", mdname(mddev));
458 			goto out_free_conf;
459 		}
460 	}
461 
462 	printk(KERN_INFO
463 		"multipath: array %s active with %d out of %d IO paths\n",
464 		mdname(mddev), conf->raid_disks - mddev->degraded,
465 	       mddev->raid_disks);
466 	/*
467 	 * Ok, everything is just fine now
468 	 */
469 	md_set_array_sectors(mddev, multipath_size(mddev, 0, 0));
470 
471 	if (md_integrity_register(mddev))
472 		goto out_free_conf;
473 
474 	return 0;
475 
476 out_free_conf:
477 	mempool_destroy(conf->pool);
478 	kfree(conf->multipaths);
479 	kfree(conf);
480 	mddev->private = NULL;
481 out:
482 	return -EIO;
483 }
484 
multipath_free(struct mddev * mddev,void * priv)485 static void multipath_free(struct mddev *mddev, void *priv)
486 {
487 	struct mpconf *conf = priv;
488 
489 	mempool_destroy(conf->pool);
490 	kfree(conf->multipaths);
491 	kfree(conf);
492 }
493 
494 static struct md_personality multipath_personality =
495 {
496 	.name		= "multipath",
497 	.level		= LEVEL_MULTIPATH,
498 	.owner		= THIS_MODULE,
499 	.make_request	= multipath_make_request,
500 	.run		= multipath_run,
501 	.free		= multipath_free,
502 	.status		= multipath_status,
503 	.error_handler	= multipath_error,
504 	.hot_add_disk	= multipath_add_disk,
505 	.hot_remove_disk= multipath_remove_disk,
506 	.size		= multipath_size,
507 	.congested	= multipath_congested,
508 };
509 
multipath_init(void)510 static int __init multipath_init (void)
511 {
512 	return register_md_personality (&multipath_personality);
513 }
514 
multipath_exit(void)515 static void __exit multipath_exit (void)
516 {
517 	unregister_md_personality (&multipath_personality);
518 }
519 
520 module_init(multipath_init);
521 module_exit(multipath_exit);
522 MODULE_LICENSE("GPL");
523 MODULE_DESCRIPTION("simple multi-path personality for MD");
524 MODULE_ALIAS("md-personality-7"); /* MULTIPATH */
525 MODULE_ALIAS("md-multipath");
526 MODULE_ALIAS("md-level--4");
527